Видео

Where's "The Library"? Is tone studio a phone app? How do you get the patches to your amp? My Katana came with no instructions, my first solid state modeling amp - I'm lost. Do I need to hook up a laptop? Da fuck?

When strumming too hard i hear a faint clipping/crackle . It's in Bypass mode. Might be this Lekato? Using with a set of Sennheiser headphones for practice. Don't have another setup to try on.

Forget about using the Katana 100 with the GAFC if you're going to use vocals or a drum simulator through a looper. When you switch channels to a distorted channel with say, a delay, the drums will delay and lose timing and the voice will not be clean.

2:29 it was at this point in my process that i discovered the tuner shaft was 10mm and the holes in my Epiphone LP special were 8mm. Nothing a drill could not handle.

Can you send wiring diagram? Thanks.

Do the patches from MKII also work for Artist GEN3/MKIII? What if you want to use an expression pedal? The Boss ga fc footswitch also has the option to modulte effects of the specific channel. What if the footswitch is virtual now? Is it possible to save presets created with the hidden amps in the librarian app in the Boss tone studio software, too (or via the amp?) All of your videos I watched are top quality and informative withour blablah. Good job!

I think the video was great, comprehensive and captivating. I'm mostly looking to be a bass player but I do both and I have a bit more experience on guitar. I love the paranormal series as well. Have you seen the Fender Meteora Guitars and Basses?

Hey Scott, I gotta say, you're an excellent instructor. You make it all seem so easy. Great video!

In general, do people really often switch off or between the effects of one channel? Why not simply use the knobs?

great advice. Thanks!

This kicks ass!!! What about a tone for the album "The Sound of Perserverance"!

Best video so far to figure out the EX pedal, but I have to agree with you...BOSS instructions are very confusing and sparse at best. I spent $150 for mine (new) in December 2024. If BOSS is reading this, haven't you learned by now that all of these videos on your pedal are trying to make up for your lack of solid info for YOUR product? Isn't it time to put out a definitive video that makes sense of this additional $150 we all had to pay to operate the amp to it's fullest potential? Next up, $50 to buy the non-existent BLUETOOTH module so that I can make changes easily at the gig via smart phone...No wonder this amp was so well priced and everybody bought it...Can I get the $200 special all weather undercoating too? LOL

superb Scott beats the laptop! i downloaded from my pc the tsl files as a group!

Hey Scott I was going to buy some of those joyos and is there any delay?🧐

I was trying to decide between this, the Gibson, or the Eastman SB55/v. I thought I would give the Epi a try. Ordered it from GC and got a new one from the warehouse. It is a decent guitar for the price. The top and back are beautifully done with a veneer to cover the 3 piece body, but is rather dark and there’s not much contrast. The neck is very comfortable and well done. The fretwork is quite nice as well. Setup out of the box is very good. The tuners seem to be very good. The pickup sounds good, but not as good as the P90 soapbars on the Epiphone Wilshire I had. I suspect it is likely the height of it. It is really far away from the strings and I don’t want to lower the bridge any more than it is because the action is where I like it. I’ve seen comments about using shims to raise the pickup and I would say that is a must. Not sure why Epiphone doesn’t just do that at the factory. The volume control is pretty useless below 7 or so but I think a treble bleed circuit would help with that greatly. After trying it out, I decided to spend the extra money and get the Eastman. It is absolutely amazing and I’m so glad I did. It immediately felt like an old friend and I bonded with it right away. It looks so cool and old school with a slight relic’d finish, and the antique varnish they use feels great, much nicer than the polyurethane on the Epi. The Lollar pickup sounds incredible and the volume and tone controls work really well to let you get the sound you want. Setup is perfect, neck is a little chunkier than the Epi but feels great and the ebony fretboard is awesome. I don’t really care for the Indian laurel that Epi uses. Overall, the Epiphone is a nice guitar for the price, but I say if you can swing it, look at the Gibson or the Eastman and I think you’ll be happier.

Thanks for that video ! I still use my Thorens , but I will buy this one fin addition

The crunch distortion sounds like the first megadeth album distortion,,,,,😂 all treble and no filler,,,,started to go into godzilla there,, i forgot i kinda stole some of that riff for one of my own.😂

Help, mayday. SoS i have a katana mk2 and a RC-10R looper, when i set up EQ2 - out parametric EQ and then press enable send/return tab, my tone becomes different, as if the speaker was put in a box. recording on the looper also sounds muffled. i don't know where to turn

I appreciate the little demo. I should’ve looked before about it, but I ordered it anyway and now while I await the delivery, I could be happy. I made the right choice.

can you dial in these with just the amp?

Please make a video where we can turn our Katana Gen 3 into a Jazz Chorus 40 ..if possIble

How do you keep your katana so quiet? I can have the suppressor up as high as 90 for some tones and its still not quite enough

Is it good to use as just a clean amp to push an outboard effects processor/preamp into? Two 50Mk2's in stereo maybe?

also when i tried updating the firmware after i did all the steps the amp just flashed red lights at the same time it wont go in waves until it turns green like in the video any help?

after i updated and did everything else the amp is flashing all red lights from booster to reverb. does this work with the 50 watt?

I disagree you now have B.T yes it’s a cost but so much easier to dial in and I can buy this and add my mk2 boss for a stereo rig with tones of head room and the push channel is great for blues and indie kind of thing yes I hav Ed a fender deluxe reverb tube amp to be honest the katana sounds better

Thank you for getting to the important info in a concise video!

Excellent review; to the point, clear and covers the main features. I've just bought one and love the simplicity. Sounds very good through a KRK Rokit 6 speaker. I will now sell my Katana 100.

Spring fucking reverb eh? The worst thing ever invented.

Pourquoi je ne peux écrire des modifications sur les canaux?

I have the Boss one and it works good enough out front but I have been too lazy to try the four cable method and its more cables to deal with, but I will try it, just not sure if it goes before or after my pedals in the loop. I thought for the four cable method to use the input and output out front before my od/boost and dirt pedal and from the dirt pedal to the amp input, then use the send and return either before or afer all my pedals in the effects loop?

Is it just me or is the Lekato MPP-10 exactly the same as the Mosky iso 10 ?!

I know this video is for Mac, but I just recently purchased the katana art GEN three and was having so much trouble figuring out how to hook it to for boss tone studio. Found a video of yours and had it in ten minutes after 2 hours of other videos that were of no help. I know you might not see this but if you do I just want to say I greatly appreciate the time you take to make these videos! GOD BLESS!

THANK YOU SO MUCH! Now to see if you have a video on how to use the app etc

I can’t figure out how to get this thing hooked to my computer or anything I’m so frustrated. I’ve watched videos and everything.

I am having so much trouble with this

If Brian from Serching for Tone says you're a good guy and a great Chanel then I'm in. I just subscribed. Looking forward to more videos from you. He's right. Good stuff. 👍

The device still appears not connected, but anyway thank you!

lol maybe YOU’RE wrong. A great deal of people love them. FAIL.

Brilliant thanks

Sorry about the audio sounding a bit wonky. I thought I had my Rode mic on, but it was recording from the phone audio. Trying to record this simple video turned into such a hassle. Here is the direct link to the updates/drivers page. www.boss.info/global/support/by_product/katana-100_gen_3/updates_drivers/

Don't sweat the woke snowflakes, dude, "Master and Slave" terminology is still terms referred to in the Technology industry.

Thank you.

Katana is a good amp. No one amp will satisfy all guitar players. Seems to be well made. Not overpriced. A good amp and value for the money.

Could not get a useable tone out of this piece of junk. Sold it to my cousin

the worst amp ever is the marshall code