Видео

Thank you for sharing such valuable information

I've seen people making foam blocks with 37.5 kg gypsum 2 kg cement mixed in 50 litres of water and foam. They set hard enough to be unmoulded in 15 minutes. They are then stacked for curing

Why did you not make them like lego blocks so they will lock together or how do you connect them once they are done?

What's the benefits of Glessreen

Can you please tell me the recipe 😢

You make it sound like you are using only 19 litres of foam mix per bag of portland but Domegaia calls for 113 liters per bag of portand. Which is correct?

Hello bro how much the mixing ratio between cement slurry and the foam?

Sir using this mixer will destroy bubbles of foam??

The chemical that produces foam for cleaning purposes is also a chemical solvent. Apart from plastic-based and polyurethane foams, concrete produced with chemical solvent foam such as soap causes it to become brittle, crack and collapse over the years. I'm sorry, if it is produced with foam obtained from soap just to make it lighter or to reduce the cost of concrete, it will start to melt after a short time, just like soap.

I admired your process how to produce concrete panel using new techniques

Did you use GI wire mesh?

How much sand was used? Was it measured by weight or by volume of sand?

Hi, I am in Ghana and would be grateful if you can help me with the raw materials needed for making these aircretes.

hi, do you have an idea of hw to make cement matter for aircrete block

Does this wall paned make from foam concrete?

Do you have an email address that I can contact you at?

Titled a how to video but starts out twice saying "that'll be explained in another video". Also, the parts where you could've explained was just a vague mess.

All well and good , but the mix that you have poured into the forms , IT'S NOT THE SAME , as the one that you've mixed in the bucket , you can easily see that the mix in the barrel, it's 5 times darker , that the one that was poured into the panel forms .....!!!

How did you put up a roof over the wall panels without a structural foundation? Thanks for sharing.

Is that an iron frame house?

Tremendous job! Thanks for sharing.

Clever. I like your folding method of mixing the foam, as well as your particular particularness in execution. Relatable.

How about weight vs regularly concrete? What kind volume yeild are you getting? 1 bag of cement is producing how many gallons or liters?

So what are the benefits? What building method are you substituting? Whats the strength of this stuff? Can some kick a hole in it? Are you recommending this for only interior walls on commercial building,? Or can you use for exterior wall of residential?

what would it cost if i make (600mm x 3000mm x 100mm) mold? and should i use plaster?

Very good and i nformatio video

Can i used the pressure washer with foam gun lance attached on it for making foam?

What is that tool you used for pumping the mixture foam ? And how did you connect it with the air compressor?

Really noise I can't hear you.

Could you use that mixture as an insulating plaster?

very good.. thank you

It was hard to get the volume of water in the buckets. Could you please reply with the volume of water used in the foam mixture? TIA

We live in Pampanga in the winter month, I would love to come visit this Dec or January ?? Please reach out to me.

U guys should try aircrete it’s super light and a block of it floats.

Wondering why you usersand? Aircrete works fine without it...

Can you buy white cement anywhere over there ? DGTE ? Cebu ? Mindanao ? I'd like to come for a site visit. I have a small house to build on Samal Island. 2:40 "dungaya recipe' sorry who is Dungaya ?

Let's face it: apart from being "new and interesting approach" (and yes, lighter than traditional concrete!), this is nothing else but a piece of complicated to make and weak shit! Stick to ol', good concrete!

i missed the density of your aircreate?

impressive construction. are the frame structures made of steel or wood, you can't tell exactly? Wouldn't burnt lime, aluminum powder or gypsum also be part of the recipe?

Is this here in the philippines?

Lmao dude what a waste of money this probably cost more than just using rebar and reg concrete remember you are not the one doing the labor they are it is just your money for supplies and labor I bet he changed his ways lmao.

Great no-nonsense video!! I suspect that _not_ any soap will do, many have lotions & nonsense in them, which make them fundamentally bad at being soap. Does the water HAVE to be clean? I'd kinda like to see this made with a whey-protien based 'graphene' suspension instead of tap water. Fine styrene pellets can work well too (in lieu of suds), if you have enough access to waste styrofoam, and a good way to grind it. Seems a bit more stable.

*Those are big blocks, what do you use them for?*

I live in the East Coast, so how does it hold up with the rain and snow tornadoes and all that good stuff

it's been 2 years, any product?

A person was traveling via commercial airlines. They had a layover in New York. Airline canceled the next segment of flight. Airline sent checked bags to baggage claim. Person picked up bag to take to Airline provided hotel for the night. Next day person took ag back to Airline. Airline checked bag. TSA saw declared firearm in bag. TSA called New York Port Authority Police. Individual was arrested.

Hi Sir.. Are you still in the philippines? Thank you so much for these videos.. I hope to make a visit and learn how to do it.. Thank you very much..😊🙏🙏🙏

I am intrested in th product give me ph no

Where to buy the foaming machine?

As soon as wind blows it will collapse