Видео

Thanks for all the info I recently for 70 bucks bought 3 boxs full of rc stuff at a garage sale. All I looked at was a little of the first box which had an A stamp rc10 and a rc10L and I immediately paid her asking price and left with all 3 boxs. In the other boxs were 3 tamiya, frogs, a black foot, clodbuster, latrax ltx-40, 12 transmitters of all kinds and a ton of parts. I now know the clodbuster is an old one for sure as it says Chevrolet on the tale gate it also has those evil mechanical speed controllers as do the frogs and black foot.

Can I run 2s lipo. On my standard car. All lipo batteries r 74v.?? My zorro is 7.2v

Nice Rig... those rims are pretty awesome!

I love the clod . The old school one had the power switch lol.

Got mine in 1996. It was my first Nitro RC. Mine had the .12 in it. Had a lot of fun with that truck! Did experience a runaway due to the power switch location. Sent it deep into some shrubs at damn near full throttle and smoked the clutch in the process. Built a switch skid plate / protector after that one. Put an MIP Stinger pipe on it and boy did that wake it up! Good memories!

MO POWA BABY!

Do I keep my heatsink open or closed. I'm confused

Wow, thats awesome!

I have this truck how do i upgrade steering servo. And which one do i buy

Is this the version from the movie?

Love hotwheels

Subscribed!!!!!!! 👍

I just ordered the 2016 re-make of the 1986 .... I know it's a little different but I had to get one!!!!

This is my local shop

F****** awesome man

Technically orange hit the ground first.

That's an oldie but a goodie of a body🤘

🔥🔥 nice.🏎💨

vroom vroom

Now i am hard

I’m starting to think there is a lot more overlap between Tamiya and certain RC companies then we’re perhaps lead to believe. Look at the cross rc dually kit, looks a lot like the sort of thing Tamiya may have developed

Yeah they'll always be Legends!. Problem was I couldn't afford the CLOD back in '87 , then thought about getting the Blackfoot .. but they had that problem with the diffs and axles so at the end I settled for the Kyosho Big Brute which I still own it today and I dont regret it! 😂

I like both, but for someone starting out I would say off-road. The thing is you can use a off-road on-road but it does not work the other way round, unless gravel well sort of.

UK Monsters is a good source for aftermarket (aka production custom) clodbuster parts. I restored my 1984 year 1 clodbuster with alot of the parts from UK Monsters which address many of the cons you spoke of. Except Suspension, my suspension function is all in the tires, the oil shocks/coil are useless and for looks... lol

When I started it was Nitro that was faster, electrics the batteries were limited and run times were short. Now I would say Electrics with the Lipo batteries as they give out so much power and then Brushless motors. One thing electrics are easier to start with as my luck with Nitro has not been good.

U didnt even drive it!?

Gotta love the CLOD! I have had 3 of them and rebuilding one currently. I started with them when I was 15 years old. Fun truck. Timeless

I got one of the limited edition blue Clod Buster trucks. I have not yet built it. I do plan on installing bearings in the kit. I was wondering how durable are they? I do realize they can not jump 10 feet in the air and land hard. I have other trucks that can do that. Thoughts?

He keeps getting all of these cool trucks, and I want them!

The only upgrade that they've done when they made the Super Clod was the plate in the chassis, when you attach the black suspension links. The original Clod had them just bolted to the plastic with nuts on the inside of the chassis, which caused breaks.

Awesome truck bud ❤❤❤

It sounds like a very good tune, but it would be cool to see it in a bigger area. My Tmaxx 3.3 is a blast in big empty parking lots or grass fields.

That runs nice 🙂

Perfect idel

I have one, I bought it recently, it is without electronics at the moment, I love Big Bear so I will update it, greetings

First. Or something.

So to add some information I bought my super Hawaii from the hobby store and the box said and actually I bought two of them because one of them I painted horrendously painted it terribly I mean I painted it midnight blue with silver speckles and I cut the wing off. I painted it midnight blue with silver speckles and that was the worst thing to do I also cut the ring off don't ever do that so the deal was there were two versions at that time there was a version that came with twin motors and there was a reversion called the CESA now the version that version came with four 5:50 motors in twin outdrives. Now it's really strange because even though there's a gearbox depending on what tooth pinion gear you use you end up with a one-to-one gear ratio there is just a mechanical advantage because you have a counter gear in there I was able to at the time purchase all of the hop-up items which included trim tabs which included delran gears and steel shafts and steel hardened gears There was also a very very specialized part that went inside of the hardened steel end plate which I also purchased I do not have a plastic gearbox my gearbox housing is plastic but the faceplate is metal also there is a really specialized part that I have one left it is like a ball bearing but it's made of rubber and your shaft goes through that rubber sealed gasket and goes out to the outdrive it fits inside just behind the ball bearing that supports the stub shaft that goes out from the gearbox the super Hawaii from ABC hobbies is so rare they came out with a smaller version which was 1/3 the size and it still had the outdrive ABC hobbies was out of Japan. The 550 that I have inside of my super Hawaii you would never ever believe that I'm running mine on two kyosho water cooled Marine motors I then have water cooling running into the astro flight speed controller. Used voice to text while driving home so if there's anything crazy or erroneous please understand. I overtime wanted to change it to a brushless setup but it has such a unique sound and now with LiPO batteries I'm able to carry less of a load when before I used to carry to 7 sell packs and when I really wanted to run it I would run 2 eight cell packs. The most that I have ever put through this setup was 37 sell packs but there was really no game due to all that weight. Now I'm able to throw more than 22 volts through the system and its only one pack. The boat came with 16 tooth pinion gears for the gearbox I went down and I'm running 12 tooth pinion gears. I am running in altura 440 propeller and sometimes I throw in October 640 propeller. I have grown up to a 442 propeller but things get really hot. Best performance in choppy wavy salt water marine conditions is the 438/3 blade propeller.. my second super Why I left it orange and kept it unique. There's also a spoiler that goes on the back of the boat not just the wing that provides lift to carry that load but there is a wing on the transom of the boat.

I agree I just picked another awesome trophy truck truly or beast

290 eu brushles with 2s lipo and charger from my choice rc shop Athens Greece(320$)

I'm thinking on buying this one, how is the aftermarket support nowdays?

Thanks for your objective review!! Just what I wanted to hear about. I just got an E-10 used off ebay, and so far, so good, and I agree with your observations.

😂😂😂🔥🔥🔥👌🏼

Love it bud. Very hard to find honest reviews now because they all sell their soul for a free sticker 😂😂😂i have started doing more reviews over the last 6 months. I went crazy and purchased about 25 under 50 bux rc planes and have started doing reviews for a bit of fun and have been blown away by the quality now. 5 years ago they qere toy grade toys now they are hobby grade toys ❤❤❤subbed ya bro 🔥🔥🔥

I really like how you modify your rigs to create custom monster trucks. The Clod Buster is a cool rig. The vintage RC's are collectable and usually go for a steep price. The Axial SMT is reasonably priced compared to the Losi LMT. Thanks for the great tip. Awesome collection and great job narrating and sharing some history ect.. 👍👍🏁🏁

I sure like the tires and rims. I modified mine as well but nowhere near as nice as you did. I sure like how you explained the operation of the diffs and axels. You really have your Everest-10 set up nice. In stock form it would make a wonderful crawler for someone starting out. It's really cool how you set it up for an alternate purpose. That's what's so nice about the E-10. Great job on the video. 👍

Wonderful video! How durable are the stock gears of the 9125 (Differential and Spur) if I only take the car at 2s (18-19 mph maximum) is the stock esc durable? How many lipos or gaming sessions have you done without electronic failures in 9125? greetings friend