Видео

Thank you so much! I appreciate it!

Hi Mark, thanks so much for your comment. Wow, that's an unfortunate experience with the plumber. $500-600 is quite a bit of money for a simple repair. The water pooling under the faucet can be fixed by replacing the O-rings. I believe just replacing the faucet cartridge (like in this video) would resolve the issue as well. It's unbelievable the plumber said that 'buying the parts is more expensive'...wow. It sure sounds like he was taking the easy way out and trying to get more money out of you! Thanks for sharing your experience and hope you won't have any more plumbers taking advantage of you.

Thank you for your comment, I really appreciate it!

@@diyonthefly probably cuz of my allergies 🤣😂

Thanks! Just checked it out. Looks its 40 min for 5aH battery, but that’s still pretty quick 👍🏼

@adventuresandstuff from ego site , 4.0Ah in 25 minutes, 5.0Ah in 30 minutes, 6.0Ah in 35 minutes, 7.5Ah in 45 minutes, 10.0Ah in 60 minutes, and 12.0Ah in 75 minutes (all charge times are approximate). The 700W Turbo Charger charges all EGO POWER+ 56V ARC Lithium™ batteries.

Thanks again! I was looking at the rapid charger stats. Will have to look into that turbo charger some more. Hope there will be some Black Friday deals 😅

Apologies for the delayed reply! Going to be honest here, I’m not 100% sure if this will work or not. Definitely consult with an electrician if you haven’t done this type of wiring 👍🏼

@@wingryda hey, yes that first switch is a clip from another video. I had realized I didn’t get a video shot of using a tester to make sure there isn’t power still going to the switch, so used a separate video clip. Apologies for any confusion.

@@famousfoodsrecipes thank you so much 😊

It sounds like that might be in an older home where grounding was not used. It may also sound like the light switch box is metal. If that’s the case, you can use a bare copper wire and attach it to the metal box and then attach to the ground terminal on the light switch.

@@adventuresandstuff Home is at least 20 years old. The light switch box is indeed metal. Thanks for the reply.

@@cshimala no problem, good luck with the install if you use this switch!

@@SupernaturalMoon hi, thanks for your comment. Both juicers produce good quality juice with the same level of consistency. The Kuvings does have an advantage over the H320 in that it requires less cutting. I prefer the H320 because it is easier to clean than the Kuvings. The H320 is also easier to disassemble than the Kuvings and it also has less issues with fruits and vegetables getting stuck in the juicing process. I hope that helps! Let me know if you have any more questions.

@@casperthegm741 hey, thanks for your comment! The amount of time to wait between polymeric sand and sealer depends on how long it takes to dry. The stone and joints should be completely dry. Depending on your location, it could take only a few days. You could use a fine sand as well with the sealer and get the same result (although polymeric sand is the best choice). I recently made another video about sealing if you need any help with that! Good luck with your project and let me know if you have any more questions.

@@lynncollins9863 thanks for your comment. I’m glad it helped!

@@ravvraj863 yeah that’s true…would be nice to have something plastic-free. Thanks for your comment!

@@adventuresandstuff I think Hurom has a new model that has stainless steel bowl. Bu the augur and the top part and the hopper is all plastic but its a good start. It costs a lot too.

@ravvraj863 good to know! Thanks for that info. Yeah, these juicers can be costly, so picking the right one is important.

Hey, thanks for your comment and you bring up some great points. I agree, the transmission seems to be where all the clunkiness happens. I had a 2014 Pilot with the 6 speed auto and it shifted much better than the ZF9. Good idea about the VCM disabler, will look into it. Have you had the chance to test drive the newer Pilots?

Hi 👋🏼 thanks for your message. Please send us an email to adventuresandstuff21@gmail.com

Hi, the parking mode requires a separate fuse box unit that costs about $40. After connecting the fuse box, there will be a parking mode function. The parking mode means that the dash camera will start to records while a collision happens. Not continuous video recording. It's basically like a sensor that detects motion/movement and will start recording. It doesn't record 24h

@@stevenziegler2523 good question. You can use any memory card brand. I use SanDisk extreme microSDXC for my Fitcamx and it works great.

@@pale4980 thanks for your kind words! Would be nice to get an affiliate link and discount code 🙂

@@karl2051 thank you for your kind words. You will need the Kasa App to configure the switch (like connecting to wifi and all). You can then integrate it with Google home and control it through there. Hope that helps!

@@EduardoCarvalho-f6t it’s paver stones.

@@lonelyavatar thanks for watching and your feedback! So usually it’s not a good idea to drain the fuel completely before storing for the summer. It could cause corrosion in the tank and the lines due to moisture build up. It’s better to add fuel stabilizer and let it run for a bit so that the stabilized fuel is sitting in the line as well. In regards to your broken shut off valve, you’ll have to search the Ariens parts site to find that exact part number. Since you’ll have to disconnect the fuel line to replace the shut off valve, might be a good time to inspect the fuel line to see if there are any cracks are deposits in the line and replace that line if needed. Hope that helps!

Thanks for sharing

Yes, the light bulb is separate. The Volt lighting site will ask what light bulb you would like and the cost will vary depending on brightness. Hope that helps!

I think it’s because FitCamX is a fairly new company compared to some of the other brands out there. They most likely have a marketing strategy to get their product out to the masses. There are some other videos out there comparing it to other dashcams with respect to video quality. Regardless if the product is sponsored or not, I always provide an unbiased opinion and provide any negative feedback or criticisms. Hope to be testing out some other dashcams in the near future and at that point, I’d be able to provide a comparison to FitCamX (since FitCam is my first dashcam). Thanks for watching and the feedback. If you have any questions about the FitCamX, I’ll try to provide you with information, just message here.

Thanks for sharing

Thanks 🤩

Hi there 👋🏼 this could be due to memory card or firmware on the FitCamX camera. I would suggest contacting FitCamX as they would be able to troubleshoot.

@@kasperskyns thank you, I really appreciate it!

Would you buy it?

@@eddieharcourt6049 thanks man! I appreciate it!

Hi there. Question - what’s connecting to the speakers via Bluetooth?

@@adventuresandstuff I have the speakers connected to my PC via USB, but the mode thing keeps swapping to bluetooth randomly every few minutes, i want to disable the bluetooth connect , BUT I need to keep bluetooth turned on on my PC to use with other things

@@MCVOfficialRUclips ohhh it really sounds like the speaker might be defective. I thought you may have had your phone connected via Bluetooth and the speaker was alternating between USB and your phone. I’d recommend contacting the company and letting them know. I don’t believe there’s a way to turn off Bluetooth on the speaker itself.

@@adventuresandstuff they are brand new, is there a way to turn bluetooth off on the speakers/?

@@MCVOfficialRUclips so the top power/mode button is how you would be able to toggle between Aux mode or Bluetooth. There’s no reason why the speaker should automatically switch to Bluetooth (unless it was defective from the factory). One other thing you can try is pressing the second button (with the light icon) for 3 seconds. This is used to reset any Bluetooth connection that might be on the speaker.

Hey, so my math was off 😅 I put a pinned comment on this video, apologies for the confusion. It’s actually 6 hours, which should be plenty of time.

This is true 👆🏽 very easy to install. Good point about the GPS! Maybe they may incorporate it into future models. Thanks for your comment.

Yeah really. Strange how they don’t offer it.

Lmao 🤣😂🤣 that might be a good name for it 👆🏽

Lmao I hate how I talk sometimes 🤣 thanks for your comment 😀

@@adventuresandstuff i actually think you did great! I think their may be more people that prefer the slower and clear communication you present. I just put at 1.25 and it was perfect for me! Haha

@@theblishknovk thanks again 🙂

That’s a good question. I don’t know if they make one specific for these timers. However, I have seen faucet covers that may fit over this. Check on Amazon or Google ‘outdoor faucet cover’.

@@adventuresandstuff thank you very much my friend, and have a great Sunday!!!

@marcelocamargo5233 have a great Sunday my friend!

Thank you so much for your kind words and support, I really appreciate it! For the back flow valve, yes you can connect one on the faucet and then connect this orbit b-hyve timer to the back flow valve. I use one from Raindrip called the anti-siphon backflow preventer…costs about $6 and is available on Amazon as well as Home Depot.

@@adventuresandstuff thank you for your answer and much more thank you for the quick answer! I had one but the filter does not allow me to connect to the timer (I have the old timer, and today I bought the Bluetooth one) You are the best!

Hi my friend, I bought the back flow valve, and it works perfectly! Thank you again!

@@marcelocamargo5233 that’s great to hear! So glad it’s working my friend! Thanks for the update 🙂

Thanks for sharing the steps and review. Helped me make my decision. From New Zealand.

@@Soulintent95 they’re still making for 2025. Would be interesting to see if they extend it beyond 2025.

That would be the Nissan Titan only .

@jesussavedme964 that’s correct 👆🏽

Just the Titan The Frontier is still one of there better sellers.

Thanks so much 🤩

Yeah been hearing that they have too many issues.

Check out the recalls for it. There's only one. And it's small. The new toyota tacoma has like 3 massive ones. These tricks have always been stellar. A couple rough years long ago but I've owned 2 and never did any work aside from maintenance and a universal joint at 150k.

@aaronberg5708 thanks for sharing your experience with the Frontier. I’ve always liked the look of the older models and still see many on the road today.

@@aaronberg5708 210.000 and just went in for a heater core. That's been the only thing. Wife has a New Gen 3 35.0000 miles no issues so far. Frontiers are just as reliable as a Tacoma if not more. It's Nissan Cars with CVT that suck.

Yeah too many random issues

* Nissan

@@adventuresandstuff I would buy 20 Nissan Frontiers before I ever looked at a Ford. Spreading fake news about these Trucks. The early Gen 2 had some issues. But ever since 2011 They are damn near Bullet Proof.

Thanks for sharing

😂🤣😂🤣 thanks for your comment

Hi Aamir bhai….I’m from India too 🙋🏻‍♂️ This light switch will control only the devices that are wired to it. So if your 9 ceiling lights are controlled using a single switch, then using this switch will be able to control all of those lights. Unfortunately, it will not work in India. The 220v in India will fry this switch 😅. If you e-mail TPlink, they might have some switches that will work with 220v. I think their HS200 switch works with 220v.

@@adventuresandstuff thanks for your reply bhai I checked with hs200 that also supports only upto 120v could you suggest any brand or switch that can be used with Indian voltage without any problem smart switches with Alexa control I am actually look for the switches for our new house wiring process is on going and am not able to find any smart switches I am planning to make a smart home system

@AamirK11 check a company called Geeni. They have a switch called “Tap+Dim” smart switch that has an input voltage of 100v-240v.

Am actually looking for a smart switch board and have checked smarteefi switch board on Amazon india and their rating is awesome could you let me know if they r good enough ? My main priority is it should work even if there is no network that is pressing the button physically and also should work with alexa

Good question. I believe it should be able to work. There should be a Bluetooth settings option on your Xbox. It should be able to pair with this speaker.

Thank you for your comment! Glad it was helpful 😀