Видео

What do you do to change the pump oil

You don’t need all that to clean a bin

Whats crazy is that I still have this trailer! Wish it still looked that good!!!!!!!

Where is the Video on how to adjust the Pro-Switch Regulator ?

That’s my dads truck❤

Did you ever make the video about adjusting the pressure switch. I can’t get mine to work.

Paul What price point would this be for this as is rig?

Is this for an air pump setup??

loved the video very detailed. My problem is trying to get the rebuild kit. Do you sell them? I have a 1 and a half horse pump.

Good video. I was always taught to pull that “loose” stage off and put the shim behind that stage. This keeps the impeller in that stage from rubbing on the bowl. I always do it that way and it works. I rebuild these and other pumps every day.

Great Video! Nicely done

Aodd and booster, why?

Are these skids still available

That's got to be 120k or better rig. The Milwaukee store is building me a baby skid for me right now. Just a 5.5 GPM with a 12V system

Doing mine now. Could I have some details on the acid bath?

Whatever you do . Don't buy these proportioners from the power wash store. I bought mine from the store in Nashville and it started giving me problems after only 4 months. Good luck with them helping you out. Once the PWS has your money they don't care about you anymore. If you are a big washing company they will kiss your ass but if you are a small business good luck. Midwest proportioners are the way to go

Why is no one putting the plumbing and power in the rear and the cleaner bin in the middle facing to the side? Just like normal trash can trucks? A camera can allow them to see the can, pull up on it, grab it, clean and go. Put some power washer nozzles inside the bin so no need to get out of the truck and wand the can. I'm stunned no one has figured that out? The key to that type of business is volume. Inefficiencies like getting out to clean the outside of the can cut into time a lot. That's costly. The model is already developed by the local town. Stay in the truck, clean and move to the next. Nice rig btw.

I am looking information on buying those nozzles myself to build my own rig

Perron video amigo mil gracias me ayudo demasiado saludos desde michoacan Mexico

Does this have built in gfci

Does the washer have a built in gfci

Man half way through the video there is no audio. I hope you make another video like this again.

How to contact to you for the wheelie bin system?

What a pain in the azz way too much F ing around.

Do you screw the end cap all the way on to where it’s recessed in the barrel?

help, the tip end does not unscrew that easy

What’s the benefit to using these over a diaphragm pump or 12v pump?

i got gen 3 my question can i had booster pump to my proportioner on gen3

why wouldn't you want the bypass still on there with an adjustable unloader as well with that setup, because without those the pressure switch is gonna be out of adjustment whenever the spray tip resistance changes or the hose is elevated to the roof? those cause pressure changes, right? And basically without what I just suggested, it would cause the pressure switch to cycle over and over and heat up the pump insanely. just saying...

My proportioner is leaking from inside the box. The leaking is coming from the top right and lower right of the box. The pro is only 8 months old. Has anyone else had this problem

Do you put thread lock on the head bolts?

What is the torgue specs for the bolt guide, and also the head bolts??

What is the distance on this unit?

Thank you for the in depth walk around, this is great. The trucks space is utilized very efficiently. A few Qs: 1. A 2.1GPM pump with 6GPM heads? isn't that pump not adequate for the Bolondi heads? 2. Over time opening the pass side door at each stop would get tiring. A removable door would be nice to take off during work day and re-place end of day. yet that's just my opinion! 3. What are your thoughts on a PTO system vs pressure washing system? Still learning that subject.

why not show us the nice clean bin lol

How would that same set up cost me

I have always associated 2 pumps in tandem to use two engines .... so now I have to investigate wtf

I bought this from power wash store. Within 2 weeks had a problem with it. Called the store and they had zero technical support for this item. Why would you sell something that you know nothing about? $400 for some b.s.

Hey Paul thanks for the posts...i have a Q about the wiring hook up for the 220v 10gpm 2 horse booster pump ...im not sure what goulds is calling hi and low voltage on the tag on the motor. I need to be sure which is 220v. Since 220 means you have line1 and line 2 ..it says line1 and line2 fir low voltage to..very confusing...

Excellent set up. The only thing missing is a flashing light on top that is activated whenever the SH is on.

Great video! You can also lock two nuts at the end of the 3/8 bolt so you can use a socket on it, making it easier to install that red plastic cap.

That's an awesome beast. But I recommend you put either 90 degree elbows or hard pipe facing downward on the high pressure relief valves b/c although not likely but if it ever blows while something or someone is near or directly in front of it will get damaged or injured. Plus just add 3way high pressure ball valves at cold water intake of pumps and burner to drain water out instead of flushing with antifreeze. I got plenty of ideas on setting up equipment to making them safer and more operator/repairman friendly.

great how much extra did the cores cost 2 grand

just ordered mine from you all. Can you please tell me how to adjust mine. The pro Switch will only work when I'm using it with the garden hose direct feed. When I switch to the Pro Portioner side of the valve, the pump constantly runs, even when I let off the trigger. Thank you!

Not as bad as I thought. Thank you!

what size trailer and price all system too

I don't pressure wash for a living but if i did i would buy a unit from you. You guys thought of everything.

How long do this pump last before the bleach destroys it?

I love that tool box . Where did you get that from ?

El cambio del sello mecánico, realizar un mantto completo porfavor