Видео

Quick fuel SS series 675 vacuum secondary

It was a custom grind not an off the shelf cam If I remember it was .496 lift, 218@ .050 on a 110 LC

18" Eagle Alloy's

@@garyallen8869 thanks

Yes, he definitely has enough air to blow up the pipe 😄

Some people like race cars, some people collect stamps, some like turn of the century pipe organs, which hardly any exist anymore

@@garyallen8869 Well, as I'm living in a country with probably near 1800 years more history than the US just about every christian church here has one. But not of this size!

@@thatdudeinorange5269 yes I know they are still very much in Europe etc. Sadly most of all the great turn of the century history is all but non existent anymore save for a few examples like this that still keep it alive What country are you in ?

No, at the Good Guy's show in Arizona

Lol, not to be or sound condescending, but you don't know what you don't know, surge has NOTHING to do with an "open air scoop", and the scoop has air cleaners in it, nor do the "butterflies" have anything to do with it, nor does butterfly transfer slot exposure have anything to do with it either Surge is caused by a rich/lean condition, in a carbureted example like this it's the transition from the idle circuit to the main circuit, been tuning these things for 40 years, study, ask questions, and understand what your talking about first, "but you already knew that huh ? Bottom line if it's surging it's not tuned correctly period

@@garyallen8869 please explain to me why efi or fi engines have blower surge? Not being a jerk, id like to know.

@@user-df8fj2np2t it's very simple they aren't tuned right, not all supercharged mechanically injected, or EFI motors surge, the ones that do aren't tuned right especially with EFI, because it's even easier to tune out the rich/lean condition in that particular part of the fuel map where it is occuring,by adding or removing percentages of fuel in those cells where it is occuring Mechanical injection is very difficult because mechanical injection has a constant flow pump that increases pressure with RPM, so it's getting the main jet, residual pressure valves, and barrel valve set right as well as throttle blade opening set right, contrary to what people think, mechanical injection can even be made to work on the street and idle and work just like a carburator or EFI, but it takes a special rifle drilled spool, a second bypass and a sprint car dial-a-jet, like my 100% street legal Nitro Coupe has, Often some people will intentionally put a motor out of tune so it surges because some people think it's cool, but nothing could be further from the truth, but to each their own, bottom line if it surges it's out of tune Take a look, listen to my Nitro Coupe idles, doesn't surge and drives just like it has EFI, with mechanical injection ruclips.net/user/shortsPB85LXPc5uc?si=Nz4Jvlb17CQpcbcJ ruclips.net/video/dXtnPRA2xxY/видео.htmlsi=RRsVEi74KDGIZJ-c Here is another example my blown Alky front engine dragster, mechanically injected on alcohol and no surge ruclips.net/video/Vul-kuZWM-M/видео.htmlsi=_rzyqM_hlXAvm_G9

@@garyallen8869 thank you for answering my question. I appreciate it.

@@user-df8fj2np2t your welcome 👍🏁

Yes they are Magnesium Halibrand's

Arizona

That's the whole point, if you know what your doing, any type of induction, carbureted, mechanical injection, EFI, can all be tuned correctly and especially supercharged motors, if it's surging it's not tuned correctly period, those that don't know any better think blower surge sounds "cool", but to those that know how to tune it's cringe worthy, and try driving something that surges, the driver's and passengers look like bobble heads, it hilarious 😂 Here is another example of what people think can't be done, my mechanically injected street legal Nitro Coupe 20 lbs of boost, idles at 950 rpm zero surge ruclips.net/user/shortsPB85LXPc5uc?si=EGMphyQB1k1Dm_JL

Pretty much only a front engine dragster

The wheels, were lost long ago, and replaced with something much more fitting along with a rebuild on the 283, it now runs 11.70's 1/4 mile

ruclips.net/video/xOO6BdtoeAY/видео.htmlsi=uEHjB-EzGOdrUYZE

And breather masks!......the look of nitro in the golden era of drag racing

Yes there is no question it IS a 41 Willy's 🤣

Blower surge is an out of tune rich/lean condition that can easily be tuned out by an experienced tuner, real engine builders & tuners hate it, people that don't know any better think it's cool, but no matter how you slice it it's out of tune

Blower surge is an out of tune rich/lean condition that can easily be tuned out by an experienced tuner, real engine builders & tuners hate it, people that don't know any better think it's cool, but no matter how you slice it it's out of tune This was a very trick blown 468 that someone I know bought from my friend, it was Dyno tuned, ran perfect, did not surge, and the guy didn't know what he was doing and got the tune totally screwed up and now it surges, and sounds like all the rest of the out of tune blower motors on the internet If you look at any of the blown motors mechanically injected, carbureted, or EFI, none surge, it's easy to tune out, but some still think it's cool

Yes it is, it's an original 1958 Corvette 283 with 3 two barrels, and a velvet drive, it works just fine will pull a skiier no problem and is alot of fun ruclips.net/video/VpZiUYJOm9Y/видео.htmlsi=Lppb8jsksdnXB-O_

ruclips.net/video/lHHoU4mr2qs/видео.htmlsi=89ihNj4OLHgqgVcR