Видео

@@Fortes_RC_Adv thanks, hoping to make it a little cooler.

@@nandoscustomdiecast368 the parts should all be listed in the description of each video

@@Ziggy8750 that would help I'm sure, this was just the first test of parts.

@@jeeplivion cool, send me the link or some pics, I would be interested to see it.

@@jonathanrancel860 custom axles I built, I purchased all the parts separate and built them the way I wanted. I did a build series on them if you look back, they were kind of expensive but it's all good parts. unlike buying a cheaper set and changing everything later anyway.

@@whiskers762 Im sure you could make it work, I,ve used redcat, axial, Injora, all kinds of different axles and parts.

I don't believe so

Never mind I found your link for the parts. I’m thinking of stretching the front links to 80&85, or maybe 90&95 what are your thoughts

the shorter they are the better it will climb vertically but sometimes you have to be able to clear driveshafts or servos, I don't think 10 mil difference is gonna hurt it much.

thanks for watching, I'm always trying different brands.

most parts I used should be listed in the build videos descriptions.

not sure, i'm sure you could, it def does better with a stronger battery.

mine was fun and worked better when I went with better shocks. Traxxas big bore are my go to now

@@jeremiahvowell1679 honestly don't remember it was a while ago, but it was solid bar not hollow tube, it was a fun build and I learned a lot.

@@themountain59 no, never did, should have. it was one of my first builds, did a lot of things wrong but had fun with it all. thanks for watching

@@idronecharpifpv89 cool, thanks for the comment and not watching 👍

yes very true, was one of my first builds, a lot learned since then.

new giveaway coming up next video stay tuned

thanks, those are all very true statements, that was my first attempt at a crawler prob 2 years ago. Learned a lot since then.

@@leesrcs my comments are never for talking down to anyone only as when people come to read these just so they know that people pay attention. Thank you for the comment especially at two years later I appreciate it.

it works great with brass front and rear, no brass on rear made it great for vertical climbing but not so good on side hill and decent.

any servo should work, you just have to adjust your end travel so you don't bind or break things. If your radio does not have adjustments then make sure you have some type of bump stop.

yes, you can run it either way, just depends on the length of your motor and if it clears your front links.

nothing other than hiding a switch under the body somewhere

just a set of LCG links from amazon, the link to them should be in the description of one of the videos

the injora kit came with post mounts

yes thats true, but my issue was the panhard bar, limiting the servo would remedy that but I would also loose a lot of steering angle. It was just a quick fix option, its completely changed now 😆

try this, or just go to aliexpress and look for remo hobby 1093 st , www.aliexpress.us/item/3256804833773091.html?spm=a2g0o.productlist.main.17.5880378cvPKJTA&algo_pvid=6f3758b0-45fb-48c9-9a83-d195af83e89d&algo_exp_id=6f3758b0-45fb-48c9-9a83-d195af83e89d-8&pdp_npi=4%40dis%21USD%214.00%214.00%21%21%214.00%214.00%21%402103249617146019687973974e2d4c%2112000031361538443%21sea%21US%210%21AB&curPageLogUid=QM9biDRRBPMx&utparam-url=scene%3Asearch%7Cquery_from%3A

let me know if the link works, it will show a few parts, just clicks were it says view more and it has just about all the parts you'll ever need

@@leesrcs Right on man thanks for the response I just got this about 2 weeks ago and few parts are braking already might get some from ebay or try this link thanks again👍

there are other options but this is a cheap one

I dont have a set to measure but depending on the shock caps you use they are 100-105mm ish

yes, you can run it either way you want.

@@leesrcs thank you I am wanting to build my first rig an I am just wanting to build something that climbs like a spider I am thinking about a pork belly 12 degrees chassis have you seen the chassis I am talking about thank you I am in this nursing home I got hurt about 4 years ago and I am in a wheelchair now an I have been saving up parts to build me a rig an I have everything but a chassis an links it's been 2 years getting what stuff I have got because I am not able to work anymore so thank you again

thats how I wanted it to be.

thanks so much, still making a lot of set up changes to find the right combo but its getting there.

I got that one used, I believe it was a Pro-line body, they can be expensive for just a clear plastic. I'm running a plastic hard body now.

its an aftermarket horn, I plan on redoing this whole set up, none of it really worked out they way I wanted but thats all part of the hobby I guess.

thanks so much

thanks, a lot of people still watching that build.

havent done a giveaway yet, but will be soon.

Im just always watching prices on amazon and aliexpress, especially around holiday sales.

HobbyPlus. Calm. They have this chassis in stock at 65$ almost all The time!

Cool idea, not sure styrene would be stiff enough, but def light

just buy a little at a time, thats what I do

I had tire foams that were too stiff that day, its working better now 😆

yeah, foams were def wrong 😆

@@leesrcs but thats why we test

it was the foams I was running that day that were too stiff, but yes, i'm trying lots of different set ups to get the best out of the rig. 👍🏻

I recommend globact silicone Blues for the front inserts, i used a stiffer dual stage foam for the rear. I found Injora silicone inserts to be more spongy, and globacts tend to have a bit more of a crispy edge to their silicone.

awesome, send me some pics and ill put it on the channel, lees1.10garage@gmail.com

The build and first test went good, hoping to have another video out in a few days, Im going out tomorrow for more testing.

hi, not sure what you're looking for, sorry