- Видео 3
- Просмотров 480 318
M Ch
Добавлен 6 ноя 2012
Stoelting F231 AXV Adjustment
If your Stoelting F231 machine is experiencing error4, the back and sides are very warm to touch, and it seems like it is not getting to SERVE2, you may need to balance your AXV valves for your machine. When it is balanced one barrel is not freezing more than the other or "hogging" all the freezing.
This is the gauge I bought. amzn.to/3SVcFnS
This is the gauge I bought. amzn.to/3SVcFnS
Просмотров: 652
Видео
Installing LED Puddle lights on a 2016 Ford Explorer
Просмотров 22 тыс.6 лет назад
Video to show removal of old halogen puddle lights to new LED puddle lights to match rest of the exterior LED lights on Explorer.
Installing Goodyear Hybrid wipers from costco
Просмотров 457 тыс.8 лет назад
Specifically removing standard adapter that is preinstalled on the wipers.
What model car did you apply? I have a 16 Ford focus and I cannot get the adapter in the arm.
Hey, anyone knows what to do if the connection is heavily corroded?
Suggestion - best not to use the top of the hood as a work table.....
Have you ever seen the lights not work, even after flipping the wires around?
You’re the man!
Any tips on how to fix the tank temperature?
This is the way to do it.. Tkx
I bought a new set of puddle light, because it wasn’t turning on. I checked my booklet, it’s the same fuse for the inside overhead lights, but it’s not turning on🤷🏻♂️ inside lights are fine, but the puddle ones are not going on, any suggestions???
Switch the wiring. Some leds only work wired one way
@@mch4613im having the same issue, flipped and flipped and nothing
If one of the clips fell off, is it okay to tape it with a small piece of clear packing tape?
2:15 ... bro I dont have that piece... even though it's in the instructions edit: I either dropped it or it was never there.. I guess Im driving with a rag on my car
Your video skills SUCK
Goodyear wipers are a batch to install
Thank you, thank you, thank you!
Sorry, maybe this is t the same type of wiper but cant you just flip the adapter up, youll feel resistance, then slide up?
DUDE!!! You just saved my neighbors from 30 minutes of screaming and swearing. THANKS SO MUCH!!!
Glad it was able to help!!
Thanks 🙏
is it really electrical tape tho?
Great lesson, I was completely stumped!
Nope couldn’t follow. Dumb design
Thanks bro for sharing 😎😎👍🏽
no problem, glad it can help you out!
Haha. Pry them in the opposite order and will come out even easier.
Bless your heart all heroes dont always wear Capes, these wipers been sitting in my garage I kid you not 3 years.... 😅
Late reply, but glad it was able to help you!
Video in landscape mode or you get narrow image like you did.
I changed mine but it's just like what you had at 3:57 So, what did you do? Did you push it or what? Thanks bud
you need to push towards the other clip as youre pushing up. or push in that side first then push in the clip side
Hi sir long term use review please
Still working great, no burnt out LEDs in the assembly! highly recommend them
@@mch4613 Do they fade out too when turning off? Any flickering?
Having a hard time finding a vid on changing the driver side mirror amber turn signal. Mine went out and I want to replace the bulb but can’t find a spot to pull the cover without damaging or scratching the mirror case. Help from anyone would be great. Thanks 🙏🏾
3:22, I think you did up side down.
There the direction is crap. I'll try it again after watching this video. Thanks.
Not sure if these wipers have special features but the installation looks too complicated to bother with. I bought my most recent pair at walmart. About $4.75 each. (AutoDrive)
Thanks, that helped. On a 2006 Volvo the gray bit of the piece that goes on the wiper arm needs to be swapped out for the other one that comes in the package. Put that piece needs to be put on with the end farthest from the wiper arm tip first, then pivot the end part up over the wiper arm end. Then snap on the clip.
Late reply, but glad it was able to help you!
Great video, I have an 09 BMW128i coupe and that my friend worked perfect for me. Thanks
Late reply, but glad it was able to help you!
Great instructions and video. I have an '07 Volvo xc90, and had to remove the grey adaptors (A14) and replace it w/ the provided (A13) adaptors for both wipers before I could seat the attachment to the windshield wiper arm properly. Thanks!
Thank you! I've had those new wipers in my trunk, with no luck. I couldn't figure our how to lock it in place!
Late reply, but glad it was able to help you!
How can I change the back Light it's a chipboard
Mario Martinez I don’t they’ve made an after market replacement for the chip board.
which back light? there are LED bulbs with a built in chipset nowadays
Which light did you buy??
Here you go: www.amazon.com/gp/product/B07953R7QM/ref=as_li_tl?ie=UTF8&tag=fuzion06-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B07953R7QM&linkId=0cdf4e4a490dbd1cc6dd0401caa0ff58
Instead of prying off the first adapter, just grab it firmly with pliers and pull. Tried this after I couldn't pry it off. Also need to take off adapter 14 and attach adapter 13.
I just used a pair of Channel locks and pulled straight up way easier than your screwdriver.
You're risking putting a screw driver through your finger that way. Just put a screw driver through the hole on the preinstalled adapter and pull up with a little force. The adapter will pop right out.
The adapter comes out much easier if you just pull on it from the end opposite the arrows with a pair of pliers and you don't ding up the plastic on the wiper in the process. The Goodyear video is pretty good now so maybe they improved it.
Thank you! I would have been driving my truck in the first rain of the season without new wipers if it wasn't for you and your video!
no problem! glad I can help!
Who knew it was so easy!
Can you post which lights these are on Amazon? Thanks.
Here you go: www.amazon.com/gp/product/B07953R7QM/ref=as_li_tl?ie=UTF8&tag=fuzion06-20&camp=1789&creative=9325&linkCode=as2&creativeASIN=B07953R7QM&linkId=0cdf4e4a490dbd1cc6dd0401caa0ff58
Thanks man good video!!!!
Very helpful, although the camera work is a bit clumsy. The trouble I had was swapping out the base, which this video illustrates very well. It is, in fact, easy once you use a screwdriver in the correct place. For the record, my car is a 2010 Ford Escape.
Thanks for mentioning the vehicle, I have a 2009 Escape.
Dude U R a genius!!! Thank you!!!
Late reply, but glad it was able to help you!
Good job! Watched this once; installed easily. Thanks!
Late reply, but glad it was able to help you!
Hey M. Ch, which car that wipers are for?
It was for a ford explorer. But this video i just wanted to show how to remove the adapter so you can use any of the other adapters that come with the wiper.
Caught these same blades in a yard sale.....Good help
Late reply, but glad it was able to help you!
Excellent video and thank you! I used a pair of pliars to pull out the insert and it came out fairly easily without dinging the plastic on the part to be installed. Otherwise perfect.
Late reply, but glad it was able to help you!
Thanks. This helped a lot
Late reply, but glad it was able to help you!