- Видео 94
- Просмотров 988 908
CALEB WARREN
США
Добавлен 3 ноя 2013
how-to videos & such.
Watered down backup channel of WARREN
ruclips.net/user/JohnCalebWarren
Watered down backup channel of WARREN
ruclips.net/user/JohnCalebWarren
Видео
Is it worth it? Water Distiller
Просмотров 15011 месяцев назад
The cheapest water distillers are around $50-$75 on Amazon. I would highly recommend getting one, after finding these results in 2 months. Thanks for watching
Reduce AC cycle time w/ automatic misting
Просмотров 14111 месяцев назад
This method has reduced our residenental A/C run time greatly & is saving a significant amount of money. There has been a noticeable 10 degree drop in output to input temperature at the inside evaporator unit.
How to repair a bowed or damaged Tailgate
Просмотров 2 тыс.Год назад
How to repair a bowed or damaged Tailgate
Rustoleum Tub & Tile epoxy - before & after
Просмотров 415Год назад
Rustoleum Tub & Tile epoxy - before & after
Valve Seating - Lapping valves w/ grinding compound
Просмотров 32Год назад
Valve Seating - Lapping valves w/ grinding compound
How to remove lifters with the head still on the engine
Просмотров 6 тыс.Год назад
How to remove lifters with the head still on the engine
How to Remove a Stuck Hydraulic Lifter
Просмотров 2,9 тыс.Год назад
How to Remove a Stuck Hydraulic Lifter
Removing Stuck Lifters - Cylinder head on or off
Просмотров 169Год назад
Removing Stuck Lifters - Cylinder head on or off
Replacing Windows - Basic How-to DIY
Просмотров 1362 года назад
Quick video of how to replace old aluminum windows in your house. Replaced with thermally insulated double pane pre-hung vinyl windows.
NIDAGE Endoscope Drain Footage
Просмотров 1782 года назад
The overfill lever broke on our bathroom tub & the latch rod fell down inside the drain pipe. This was a video of fishing an endoscope down the drain with a hook on the end. To retreive the latch arm rod I hooked onto it & slid it back out of the hole. It was well worth $30 on Amazon. This model was the NIDAGE 5.5mm wireless endoscope / borescope www.amazon.com/NIDAGE-Automotive-Inspection-Semi...
Mining Settings for Windows 10
Просмотров 272 года назад
these are some of the most important settings to have enabled / disabled for mining with Windows 10
Honda Odyssey Rear Heat AC panel removed Diagnosis & Fix
Просмотров 3,9 тыс.3 года назад
Honda Odyssey Rear Heat AC panel removed Diagnosis & Fix
Odyssey Compressor AC clutch replacement on the vehicle
Просмотров 17 тыс.3 года назад
Odyssey Compressor AC clutch replacement on the vehicle
Honda Pilot Rear Seat Latch Handle Fix disassembly
Просмотров 22 тыс.3 года назад
Honda Pilot Rear Seat Latch Handle Fix disassembly
Honda Odyssey Expansion Valve Replacement
Просмотров 15 тыс.4 года назад
Honda Odyssey Expansion Valve Replacement
49cc Ice Bear moped won't stay running Fixed
Просмотров 21 тыс.4 года назад
49cc Ice Bear moped won't stay running Fixed
Odyssey Front grill removal - fast easy way
Просмотров 11 тыс.4 года назад
Odyssey Front grill removal - fast easy way
Odyssey Compressor removal from the top - easy way
Просмотров 144 года назад
Odyssey Compressor removal from the top - easy way
AC Compressor & clutch removal Honda 3.5L
Просмотров 2394 года назад
AC Compressor & clutch removal Honda 3.5L
Heater Defrost & AC fixed on 07-13 Tundra & Sequoia
Просмотров 41 тыс.4 года назад
Heater Defrost & AC fixed on 07-13 Tundra & Sequoia
Watched 3 or 4 other videos and this seemed the easiest and most logical to try...and it was, and worked first time! Many thanks Dude!
Thanks for the video., Good advice for this 70 yo guy trying to save money and fix mine by myself.
I have a different problem it pairs ok but i get "Please Wait" come up on the front, the only way to get it to work is unplug and plug back in, any ideas ? 💡
Doesn't work, belt is too short to fold over on itself. Not even close
Thank you so much from NC you really helps me
i came here from a car fixing vid n good grief .........
Does that method work on a Dodge hemi motor to
Dues that method work awn a hemi motor to
Hello! I have that same problem! Where can I buy this whole plastic thing? Thank you!
Thank you my brother I was having problems ❤❤❤
Accucator not working when I change setting front , front and legs … Probably need new ??
Thank you, the remate did it!!!! 🙌🏼
Thanks, after many videos the mute/square button was the answer! Cheers 😊
loosen up the bolt from bottom?
Any chance you could get this without CEL
Either way, i think you just solved my headache! Got a '14 in my shop right now. No codes. Runs beautiful until you try to hit the highway. No codes. I think this is the culprit.
Can't you just put the engine in gear with hand brake on?
Usefull... Thanks you save me.
Straight to the point! Great video
Cool video but this in not my Tundra
What did the thing do before you changed silinoid. What were the symptoms...
Thank you so much for a straight forward video. NO BS of personal stories, failed attempts to make it funny, and/or most of all NO annoying musics. Thank you for giving written details of the 2nd option to start removing it from the front. MIne was easily removed by starting to pull it up from the front tabs. It just came right out, super easy, 30 seconds!!!
How do I find that tool?
Thank you so much for sharing You help me fix my fridge now it works perfect thanks to you 👍
First one Who dont cut it XD
How do you torque the pulley back on? Do you wrap around the AC compressor?
Justo hoy tengo que sacar la polea y tu vídeo es muy importante para hacerlo .. Siempre es más barato comprar una Correa nueva que una herramienta mucho más cara y que no se ocupará siempre .
Freon is freon..lol. NO it's not, read the label to see what type of refrigerant it is.
Mine was stuck on defrost mode so what I did is I got a long flathead screwdriver and forced those gears open . Works great so far and I didn’t take anything apart . In less than 5 minutes. I have nice cold air blowing out . Come winter I might push it back to where it was . Yes it’s half ass but it’s also 17 years old 👍
Which gears? Could you give a better description? I have been stuck on defrost for a while and getting ready to buy an assembly and replace hoping it is the cause...If there is a quick fix I can do that would be great!!!
@@wehsmith just make sure you have a real long screwdriver for leverage 👍
@@wehsmith Better yet in this guys video towards the end he shows those two gears I’m talking about at top right corner . That very top gear is the one you pry up and you will get it out of defrost mode and more forced air out those front vents
@@madmike4 Thanks for the info!!!!!
If anybody is looking at this, that top gear let some air out of face vents, but just a trickle. My issue was after removing servo assemble the gears that are then visible. if looking at it from under steering wheel, there is a lever on the right that one vid says need to be in up position. It was not moving, tried several times, then tried a little more pressure (was doing careful so no break) and back and forth all of a sudden moved to the other position with a CaChunk! THIS opened the face vent !!!!! Also there was a misalignment in the gear under it with a gear you can only see if stick head way under.. notches visibly not aligned. Could not move, unscrewed the lever could get to and moved it to what looked like proper position. Now I have the air bowing out of face vents, no delay on startup, but I am not going to test if it will go to other positions and back til after summer is over.... I will probably post on tundras dot com with pic by this weekend ... username fuzzentropy
Great video super helpful and helped me fixed my vents!!!!
This is a really big help! Just knowing that the plastic cover will not come off will save me some time!
So what's the fix if my "flap" is broken? What exactly is that part called and how is the dead one removed and new one inserted?
This video is helpful
Well 10 years later and it still works thank you
Just ordered a new soundbar but now i gotta try this to see if i will just be moving this bar to the bedroom
Caleb, A personal Thank you!
I am getting ready to turn my Prius into a stealth camper/ Package delivery Vehicle. I was dreading getting started. Now I can see step 1 is an easy job. Great video and right to the point. 4 years later this video is still helping people.
What year is this car?
Nice man , now i can upgrade to lightwight pulley
How you put the new one back one ?
thx
Did you find out what it was
I fixed mine
I had the same problem
Do you have a link to the tool?
That’s still not correctly timed, it’s still jumping teeth in your last video!
Excellent video. My high beams were stuck on because of this. I’m too lazy to actually fix it, so I just pushed the stalk inward and pushed it back/forth until the high beams went off. I don’t use them often so I’m fine with not having them work right.
Model?
ty and ty <3
My kids loved watching it with me, although I think they missed the point 😂 God bless your family!
Good way to destroy your alternator no? 😅
Thank you