Видео

We put screws we had someone push with a piece of wood while the other screwed a screw

What cocking sealing did you use ?

Que tal buenas noches, alguien que me pueda ayudar tengo un rifle ruger y se abre al disparar, de la parte donde se quiebra para cargar el diabolo

Whenever I load a BB into the rifle it just falls right out of the end of the barrel, any help please? Is there something that's supposed to hold it in place?

You can get faster velocity with gold PBA raptor or try copper pellet

That particular model has had a lot of problems like this. My neighbor bought one before I could warn him about it, and sure enough his broke.

I’ve had the rear bolt behind the trigger snap due to being overtightened and sealed with locktite by the previous owner. Was fortunately able to drill it out and remove the pieces by gently going through with thread tap. Replaced with a stainless steel bolt and will just keep an eye on it and tighten every few shots as per requirement. Considering changing to a hex bit high tensile bolts also for ease of tensioning as I have been finding the Phillips head bolts less ideal for getting good torque. I got this air rifle for a really good price second hand but am admittedly unsure if I would have bought it new for full price.

Hey do you think you can show me your setting for the scope? Cause I can’t really sight mine in.

Did you dry fire that ?

Good Video Brah!

But you look so familiar what do I know you from? You don’t happen to live in Virginia do you?

This air rifle is very nice , fairly accurate with good power ; only down side is the screws that hold it together . The screws loosen up . But I love this air and rifle, good weight feels solid hits hard , great price at Walmart. Only issue is the screws. ( I've JB welded mine, after several times of of screws getting loose

Interesting to see actually putting all the connectors together. Thank you!

I need to get a trigger pin back in the back of the pellet rifle

It will stop a human thats attacking also, trust me!

I get the best accuracy out of the crosman HP 7.9 grain. They shoot under 1 inch groups at 33 yards out of my rifle.

I'm 54 and I just got a springer airgun a couple years back. I'd forgotten how much fun they are plus they are cheap to shoot. I can't get much accuracy out of the piranhas. Good vid !

Hey I'd like to speak with u id possible. I'm having issues with mine . When I cock It it does not hold or lock in to place.

Hello

Thank you, I understand a whole lot better now that I watched this video. The instruction are not a whole lot of help.

I have one that need to be put back together where can I get the manual and the components to go out it back together could you let me know Tracy mccutchen

Is the bronze bar thing suppose to make a shaking noice when I shake the gun ?

These rifles are good and heavy but there still air rifles. You gotta have the proper give and follow through. I shoot 25-75 pellets a day every day and it's like the perfect therapeutic fun. When you are that good at target, you can be even better in real world. 🤙

New air rifles come with factory chemicals and they will diesel on their own. That why they're extra loud and powerful at first unless you clean it from out the box. I have a pellet burried in a frying pan with the tip sticking out the other end because it was dieseling brand new.

Why does your rifle sound so quiet? Is it just because of the recording or what cause mine Air hawk sounds like a.22lr or a loud firecracker. Echoes everytime

My brother in christ, there is a adjustment screw on the side that increases the speed and power

Great find on that shipping pallet. I have made several outside showers over the years and I am amazed at the lengths people go to for privacy when there's nobody around for miles. The more you close it in, the more likely some critter will try to seek shelter... and then there's the wind trying to blow the door off. Face the opening away from the driveway (just in case) and call it a day.

Bought this stupid thing two weeks ago and it is trash!!! Items are not labeled accordingly, instruction sucks!! Don't not recommend!!

How large of animal have you taken with ruger??

I wonder if you could get the Crosman Gold Flights to penetrate the propane tank. Those, while light, have some great penetration strength.

very satisfied with this product

I bought this gun yesterday because it looks like a pretty bad ass pellet gun and it's Ruger. I'm pretty inexperienced with scopes. I attached my scope but can't see through it. What am I doing wrong? There are no scope directions that came with the gun.

Just bought this gun yesterday. I can't see through my scope and there are no directions I can find to tell how to fix it. Am I making a simple mistake or did I attach the scope wrong? Please help!

Should have gotten you a spring powered hatsan 125 in .25cal.

For penetration shots, check H&N Hornet 9.57 gr. For lower velocity rifles, check Gamo Lethal 5.5 gr.

I am sad 'causs here in Canada we are limited to 500 fps unless we get a firearm license. Good vidéo! Thanks

My first 5 days my scope Lens piped out of place and the bolt near the trigger popped out that’s why I’m looking at this video right now

Good video i love my airhawk also love my benjamin bulldog 357

Can't hear anything you are saying. Also I have a daisy 1100 and I can consistently make 60 yard shots with the iron sights it came with. I think something you guys aren't taking into account is that generally speaking these rounds weigh 7-10 grains and projectiles that small are significantly affected by wind in comparison to thins like real firearms.

How has the shed held up 2 years later?

I like the Ruger Air Hawk Elite 2 but I like my Hatsan .22 much more. Just a better made gun all around IMO.

Not bad.I bet they would of went through if you used a more penatrating pellet.Doesnt seem lk,e a bad gun at all especially for the price.I may pick one up

Mine was loud and smoking for the first 5-10 shots also. I figured out it was the factory oil they put in to keep the rifling or whatever from rusting, causing dieseling. Put some generic Vapor Rub in appellate skirts, about halfway full or so, And it's right back to shooting hypersonic pellets with smoke coming out of the barrel

if you are thinkinking about buying one of these pieces of junk save your self a a real pain in the ass and buy something that is not built out poor grade of plastic you can`t keep stock screws tight no matter wht you try . about 10 shots and screws will be loose. if you want a ruger rifle buy one with a wood stalk. . or another brand like a crossman.

Very well explained thank you. I feel I can do it my self

Got one of these myself......instructions are a joke.....glad you posted this video. My panels that make up the wall don't really overlap like they are supposed to....once all wall panels are up there is about 1/2 in gap in the corners.....and pilot goes were no done in factory....had to drill them all myself

Quick question...had my RugerAirHawk Elite2 for about a yr now, after putting about 2000 shots through it, I noticed under my barrel have slight wiggle,🤔...as if a minor rattli g sou d only when I shake it, or breaking the barrel to load, .. is this normal???

Awe man your phone! Good job by the way!

👍 Thanks for the heads up. Love the color but so thin. Think I'll be doing twice the number of 2x4 framing. Can't hurt... How is yours holding up after these two years?

I had to replace the 5mm screws up fromt with longer screws grade 8 button head allen key type. One screw broke and the other screw stretched.