Видео

Dude, your skin does not look healthy. Maybe a liver problem?

I’m sure it’s an issue with some but luckily the only malfunctions I occasionally get is super wide hollow points sometimes jam up. Luckily Ed brown mags seemed to lessen the issue

Thank you for posting some groupings from this gun, even If it is with irons. No one understands that the Forged series from 2023 and later is a reliable gun that is cheaper and superior the anything PSA makes... though Century has really stepped up their game, but their prices remain high. Functional Upgrades that made mine even better: I put an ALG Trigger, far veterinary than the one that came that has a little before the break Using a 14x1mm LH to 1/2 x 28 thread adpater, with a pin-enshrouding crush washer (needs to be tight for adapter) to fit a 5.56 VG6 Gammer brake (zero recoil and muzzle rise with that on it, compared to the crappy 5.45 brakes with giant bore diameters). Functional Upgrades that I like, that you may not: I install a recoil buffers in all my AK's, (ou can watch slomo videos of coverless AK's - they almost all impact the rear hard) I installed VISM Plymer folding buffer tuber adapter with a FEB Defense "GL- Core Impact" shock-asorbing butt stock (I like to absolutely zero felt recoil and muzzle rise). It now shoots flat as a laser beam. Non-functional furniture: I installed a TDI upper and lower polymer handguard on, they lock together and retain zero, and it.has a top and bottom pictinny with two small side pictatiny slots (fitting was required on the upper hand guard, I had to reduce the size of the ring the lips go into so I could rotate the handguard into place) I have knockoff 30 doll-hair ZDI optics rail, works perfectly... but I don't like rail aesthetics, so I got a TWS dog leg rail. For my backup sights, sinxe that removed by leaf sight, I have on top handguard a seeall sight - look into them, they make great backup or primary sights (there's wasn't room for my wind age adjustable keltec peep sight on the TWS rail). Optics: Sightmark Red-Green Multi-reticle.dot with a knockoff EO-Tech 5x magnifier (works great). And I have 1000 lumen light on the front right, but I don't have the pressure pad mounted. Conclusions: I am only 50p rounds in, but haven't had a single failure. The Beryl firing pins are no longer available, but Carolina Shooter supply's AK74 pin fits, but I haven't used it yet. My Pioneer came with the cylindrical firing pin that I think is better than the norm for AKs. Note mine is a 2024 forged sporter model. I really think post 2023 they got the hardening and metallurgy down great. Also it came with the that brake you had, but mine fit and was already on it. And mine was already zeroed. But the gun was overgassed like a mama jama. Once the compatible KNS piston is in stock again, I may get for that and I can remove a lot of my recoil reducing items (thr brake works amazing, not doing that, but the recoil absorbing stock cluld be swapped for a better looking AK stock) These polish guns are clearly having their gas port diametr tapped for the under power 223/5.56 steel ammo. If you run steel ammo, then the overgassing aint an issue. So you can counteract that and protect your longevity with a recoil buffer - highly recommended. And if you like the already low recoil to go to zero - either get the KNS piston when the right one is back in stock, or get my recoil combo: 1. 14x1mm to 1/2x28 adapter to equip: VG6 5.56 Gamma Break (Gen1 ... Gen2 are not as good IMO - I have their AK gen1's on my 7.62 AK's). 2. Recoil Buffer (Buffertech makes the best apparently) and then impact of the overpass but carrier will be reduced in both recoil and parts wear) 3. A buffer tube adapter and the GL-CORE Impact rebuttal stock that has built in shock-absorber OR you could get FAB Defense's very expensive AK shock absorbing butt stock. Thats all, I know it's a lot

The Real life Robo-Cop gun

I'D BUY THAT FOR A DOLLAR!!!!!

When them mosquitoes getting too numerous*

My d10 wont make it through a full mag without failure to feed

Potencia y fiabilidad 😃👍

It's a chronograph, not a "chronometer" which is a very different instrument.

The minority never stood a chance

Mine can't make it through 5 shots without failure....you can't call them great not in the slightest.

That sound at 0:03 though

I'd pay 100 dollars just to hold a real 93r

OK, so just double checking here, you measure the depth by holding the calipers at the angle of the ramp and not perpendicular (90 degrees) to the rails, right?

Any videos on how you did the firing pin?

They make hellpups in 556😭🔥what a time to be alive

Hellpup 5.56? Hy

I have had mine 3 years plus. from day one it jammed. I just thought it had to be broke in. Ive tried different mags, Ammo at 230 and still jams. now I see the problem and I just sent mine back to Tisas. Im hoping that after many issues they to know how to fix these beautiful guns and make them right! the models after the company SIG was removed in the manifacture, those Duty models run flawlessly. will update when the gun is returned from Tisas

Pull that tab out and then half twist and pull down on the second pin and that will drain ur oil. Then remove housing for oil filter

sounds good,are they both Chrome Lined barrel>

Nice.thanks for your service

Titanium hammer is known to absorb much shock and is much easier on the arms.. I wonder what this material does to this semi automatic hand gun But, man, I love the sound of titanium

What stock is that

Tisas 1911s are great budget guns you will have to break in and hope works well afterwards. Dont knock the brand since they have a lower failure rate than Colt and Kimber. This is fact. I dont know of any company with zero issues in their 1911s

Mine feeds ball ammo flawlessly.

This gun is very dangerous gun. Too dangerous !

Speedytube83... how 🤔 ❓️ do you think an AK74 firing-pin will work in them pioneers?

I miss parasite eve 2.

4 or 5 shoots??

Промазал ведь.

Whats oal on the 16inch tactical with this stock

Does the Hughes thread adapter need a lock washer or thread sealant to prevent it from coming loose? Or perhaps the birdcage crush washer keeps it from doing so...Thanx for the review.

Always hated the grip at the front on these. lol looks like a weird tooth

Finally subbed. Always run across your mod h vids. Now I see you destroy online narratives from Reddit. I love it

The N-line ultimate in Canada has all the bells and whistles. Leather seats and moon roof. I wish it had the stick ebrake. I love ripping and drifting in an all wheel drive car.

I did a backyard style feed ramp fix. What I did was used the file on my gerber knife and just filed it down a bit after studying the angle on a seated magazine. I filed it down and made sure it was smooth, then I took it to the range and ran 200 rounds through it without a single malfunction.

3 1/2 inches would put in the same as HK 93 at 100yds

My boy went in on Klayco and Mike 😂😂😂

Okay so I’m getting one more CETME L and maybe another C. But then I’m seriously considering rolling the dice on one of these.

Is that metal shavings?

Hey Exxon Valdez you need to do a better job controlling your spills.

Where can I get that fan

Headspace gauges

I got a Pioneer Arms 5.56 too, and I like it. Mine has the classic wood stock.

Full auto mod

Nice I have the same one. Great video

How's the gas being lefty?

Nice video 👌🏼what brand of mag is that from GunMag Warehouse ?

Nice man

What stock is that?