Видео

This is great. There's a ton of videos by professionals doing a fantastic job in time-lapse. This is way more use to most of us.

Where does the melted snow water go once the bucket/container is full?

Thanks for posting great video, if you had do do it over would you still use this machine or buy a more powerful one. Looking to purchase my first plasma cutter for home use. Not looking to run a business, just want to cover all situations at home

How come there is no water in your water table. Why did you run out of words and lazy montage your video? That was good acting at the start of the video, do more of that

Thanks for posting.

You should have added a vfd

Good tutorial for those with the skills to handle refrigerant. For others, it would be easier to cut thru wall, build a frame, and install unit with proper caulking. Pro: quick change if unit fails, window units affordable. Con: Renters can't cut hole in wall.

I'm going to attempt this on a smaller scale for my office that I don't want an AC unit in. My only concern with your setup is the condenser being higher than the evaporator and oil return. Has this lasted since you installed it?

Thanks for the video man, 😎

That’s a cool project. A lot of home teardrop camper builders need a 5k btu mini-split like this. Enclosures, blowers, and condensate drains are always a challenge.

Honestly I'm not a fan off EPDM .. but the issue here is poor fitting ! And the fitting starts with the substrate it's fitted too being correct. Then the right application off glue and the membrane being applied at the right time. If you do it yourself after watching online videos and reading manuals honestly how could you ever expect to fit it like a professional would ? 99% of the time it's not the product it's the installer...

Yes, as many have metioned, the key to snow making is a nucleator. Without it, all you have is a fancy skating rink flooder. Its easy enough to make a nucleator nozzle, but you are going to need an air compressor, and not just any old compressor. You need one that can run full time aka 100% duty cycle.

Air Conditioner?

Why not try a roofing supply store 😂😂😂

Classic homeowner’s mistake. When gluing you have to wait a for the glue adhesives to flash off the roof deck and the membrane. Meaning touching it and its sticky but none sticks to the finger. You’re looking at gas bubbles everywhere Glue was not dry enough to roll membrane on roof which creates gas bubbles. FYI so come silicone caulk is chunk! Always use a butyl caulk which is real rubber. Box stores now carry it Quad Caulk.

its funny to see all the people of the "you should have, you could have, why didnt you just, etc etc" crowd come grace the comment sections with their anointed presence. Then i sit back and smile knowing there are so many people out there who can build/fix/create just about anything and get a real enjoyment out of their determination. I wonder why people have this notion that diy'ers are just wasting their time without realizing that wasting their gifts is much more detrimental to society. keep it up diy'ers and never take what any of these people say to heart, because we are the ones they fork over their cash to when they have the inevitable problems of things breaking down. (when they come by my house and see all the things ive fashioned from the mouse door on the side of my house that is a retractable yard irrigation system, to the conveyor belt car storage hideaway enclosure that parks out of sight for me, to the 12 wheeled rolling back hoe wagon, its like a kid in a candy store thats wants to see everything. not realizing that everything they see pretty much came from the curb or someone gave away because of a usual simple fix. having this knack is thumbs up)

this is really nice!

Through a block of dry ice in the coil it hook up a glycol chiller

These repairs are all wrong. Very temporary. For one thing, you can’t let silicon caulking touch EPDM. It eats away at it over time. There is special caulking that’s designed to be used with EPDM. All EPDM tapes MUST be used with EPDM primer or they will just peel off eventually. Where the EPDM goes over the top of the wall and hangs down on the outside, if there’s no metal cap to hold it down then you have to use termination bars attached to the wall with tap cons. Or at the very least attach the EPDM to the outer wall by fully adhering it to the wall using EPDM bonding adhesive, which is basically a glorified contact cement. Still not really right but better than nothing. None of the repairs you did will last for years. That’s a promise.

Just to see how quiet it is

I didn't get to see it operate I want to see it operating

Good job brother.. even though work for new invention.. keep going.. I am from India

Man, making snow!! Building a machine like that takes a lot of snow making knowledgeable. As I type, my yard is turning white from the system I built. Your system is on the right track. But you need to have a water pump that will really move the water at a high rate of speed. Like a pressure washer. The blowing machine, once. I used a 15 gallon drum, a squirrel fan, Polly and spray nozzles from a car wash. And then I use an air compressor and a pressure washer to move my water a lot quicker, to break the water down in the snow when it left the end of the machine.

any leaks in the roof?

Nice video!thanks for the info!

I built a Snowmaker of my own I think you're idea is very creative but you're overthinking it, all you need is a air compressor and a pressure washer into a snow gun. But I like your thinking so far, keep it up and don't give up trying. I think you just need more pressure and maybe to do a different design like a air/water gun and you need a nucliation nozzle to put out a mix of compressed air and pressurized water to freeze and go into the bulk mist and stick together and create snow! keep up your creativity nice job!

…

2 tips #1 get a damn pressure washer run the water line from the pressure washer to your little nozzles! #2 get a damn air compressor! Buy some fittings

Great idea :D

Thanks of great help.

Thanks for that. Why do folk always raise the panels off the deck, base, roof before bolting down ? I've seen that several times before and i don't understand. A 3mm washer between frame and base would allow water to flow. Am i missing something ?

Is 3:19 silicone or cement glue?

What was the black stuff to stop the water going through?

I love when people make custom AC builds

For a dyi and not paying someone...👏 👏 👏 bravo

Does that Bluetooth module record the data even if you're not connected to it with your phone so say like you're gone for a week and you come back and plug your phone into it it'll tell you the data for the previous week

Thanks for sharing . Greatly appreciated!

yo

*We're very happy with the unit. Pretty Easy to instal **Fastly.Cool** too.*

I thought my motor was stalling also using larger bits, come to find out the set screw on the spindle pulley had vibrated loose. Tightened it up and no more problems .

He should’ve told somebody else to do this video I was falling asleep guys very boring with all due respect it was an embarrassment I’m even embarrassed for the guy God bless you out there my brothers and sisters take care Jesus Christ is on his way amen✝️✝️✝️

Why would you use such small panels?

Does this machine require argon gas? Are you still satisfied with your purchase?

I'd love to hear if this is still working and how you like it. Very nice design! (I'd just started studying for my EPA 608 certification yesterday to do similar work on the Midea U window AC)

I'm guess you are just doing this for the fun of or either you already had all this equipment because you could have just bought a split unit for the price all that equipment cost.

45 minutes jesus. at 15 im getting out the hair dryer/

I am a pilot car driver so I live in my car most of the time. I am in the process of installing a window unit with a 2000 watt gas generator so I can have ac while I sleep without running the car. I had a crazy thought, can you convert a window unit to a mini split? So I typed it into RUclips and your video pops up! Love it! Good work!

With the new refridgerants you dont need a license because they are envoirnment friendly

Does it come with the tank

Good work. Thanks