Видео

Yes, those are IR , so with cameras night vision uses the IR to see in the dark, you will notice the pitcher turns white. that is because these IR sensors cannot contrast back to color like some expensive security cameras. in short its lights for the camera to see, not lights for humans to see. hope that helps.

@@kenstechlab thank you for your answer. Do you see something at night? I do not see anything. Do I need to turn of the light of the anycubic?

It's the Chinese way. I wonder if I added a bigger wall charger if the problems would go away?

Thank you for your comment, Hope to do better.

Hope you like it!

Here is the link, I did not add it as this was shipped with the camera in the combo. store.anycubic.com/products/live-view-camera?variant=44599767498914

Thank you. I have ordered the new GK3 and will see how that stacks up

Yea, I found that out the hard way. The U-Disk contained all the pre loaded files. I also just found that the Camera needs the USB plugged into to capture the timelapse. I also found that each time lapse uses the same name and overwrites the previous one. At least in my testing it worked that way.

Yes, That is very true!, I have been working on the wirepod setup and was going to make a video on that part when I get it completely working, having issues with the API weather and using open AI API.

your most welcome. I was wanting to so a segment called cooking with ken, lol never turned out.

yes, the battery is keeping up fine with the solar panel. I have not been back out to charge the battery., I also have the false motion pictures handled. The Vosker and the Reveal are side by side.

I have had my working since this video, I have found that the temp stops working all the time, the time will switch to 24h off 12h. I have left the house mutable times with my phone battery at 20% after all night charge. For the cheap cost and China I did not think it was going to be much, If a good company would put good parts in it and charge a little more this would be great. Its always to make a quick buck. So in short I agree.

Thank you. As a Network Engineer and purchase all the stuff you see on my channel myself, I need to look at the facts, not trying to get the next thing from a company.

Yes, it really defaults to C and not F also it likes 24h time better then 12h. but either can be changed,

Thank you.. I have been working on my audio for some time and it gets better in later videos.

Hopefully you can be happy again.. I am still working on the local server that is easy to make Vector Great Again!

I am still working on the local server that is easy to make Vector Great Again!

@@kenstechlab Good stuff 👌

Sometime I think they want to kill me..

@@kenstechlab lol. Oh nooo. Not you. ;)

lol. now if they could only read.

Me too.. I contacted them and they gave me a little time credit on live view.

@@kenstechlab I’m glad you did. At least you got “something “ back. ;)

Thank you! Will do!

Thank you for your input, I am always trying to improve the show, Camera and Editing is always a place that I need improvements,

@@kenstechlab Hi Ken. I hope my intervention wasn’t taken in anyway as criticism. I’ve only had my P1S for a couple of weeks and have concentrated on printing improvements for it. Poop chute, desiccant containers for the AMS, LED light ring etc. If it wasn’t for those very helpful people who make videos, showing how, I reckon I’ve have only made a benchy by now 🤭

your fine. Videos I make are on my off time from work. Sometimes I don't see everything on my editing as that takes a lot of time and it's good to have feedback.

I am working on getting it going with a guide, I will get this done.

@kenstechlab I just want the company to give updates that's it, 1 out of 5 company for sure

well we know what happens when a company does not take care of its customers. They go out of business just like Digital Dream Labs did.

The Temps are 10℃(50℉)-50℃(122℉) Amazon Link www.amazon.com/Printer-Temperature-Controller-Thermostat-Printers/dp/B0BL6WZPM9/ref=sr_1_3?crid=6EH2JEVOXQ8V&keywords=resin+heater+3d+printer&qid=1677982854&sprefix=resin+heater%2Caps%2C79&sr=8-3&ufe=app_do%3Aamzn1.fos.18ed3cb5-28d5-4975-8bc7-93deae8f9840

No, the other side is the Engineering hot side for your prints that need that over 60C like carbon fiber filament.

谢谢您，很高兴您喜欢该视频并希望它有所帮助。

That is certainty true, the top of the sticker is not as important as the bottom during the installation, After install a good 99% ipa cleaning and all is good.

Thank you for your comments.

That was the hardest part to make. The belt is printed in place with a connection piece. When you put it together the track will be closer until you pull them apart to add the spacer.

When you buy the new A1 Mini or the A1 Combo you get 5 ptfe tubs, 4 are for the multi-color and 1 is for a single filament roll, you have to remove 1 of the ptfe from the extruder to use that 5th for a single roll that might not work with the AMS lite. On my last video replacement of the Heatbed I did not connect the AMS lite and used that single ptfe tube for a single roll. hope this explains it well.

@kenstechlab thank you so much, very clear. Is the single ptfe tube shorter than the other four?

Yes, its also has a gray color.

You are very welcome. I am no expert just a try and fail thing lol

I am working on some good news, this will bring vector back to life. Stay tuned,

I recived my voucher just a couple weeks ago, now I have the new Heat bed, I still have not used the voucher lol.

@@kenstechlab I ended up buying more filament. I already have 4 printers and it was like do I need another one? But it was only $80 dollars for a Bambu A1 mini and I was like ok no more printers lol

That is great!

That is great, Times have changed alot since the beginning, I have been in IT for 35 years. The MCSE certification has changed alot, Tell your Dad congratz and hope he follows the path for a great career!

Its season to taste, But who can do that with frozen food.. lol

When doing a video, its alot of stress and forget things, :)

Yes, A few times!. they finally got it right and all futrure deleveries have been fine. The only missing peice sometimes are the cooking instructions. All cooking information is in the Suvie by name or google takes you to the Suvie instructions.

I think it will be perfect!, if you make a mistake just do it again. no problem..

At least its still working and charging my phone lol

Actually; That is what I compared it to, My DoorDash is about $24 per order. The meals are for 2 @ 24-26 that means if I split a meal its $12 per day for lunch also the food is much better for you then you can get with DoorDash. I havel also lost weight using the Meals and not using DoorDash. Hope this helps.

My pleasure! Still the best printer out there.

The jingle Bells has to go. I thought that last update would remove that and add a summer malady but I guess not: lol

That is cool, I like a small town but still 20 miles outside of Pittsburgh.

I have taken your comment directly to Vosker managers.

@@kenstechlab thank you !

Their website states it only fits the v150 & v200.

Actually it is the 300 it fits as well. I confirmed with Vosker. Problem is I was told by Vosker support it would fit the ultimate as well. Guess not! I’ve asked them to consider making a box for the ultimate. Only makes sense to me - it’s their top of the line so should be protected.

I was thinking that you could do a 3D print of a new box or maybe there is one on Thingaverse.

Looking at the product it looks like from 40F to 80F, Hope this helps. The real question is will it fit in the printer with the power line..

Thanks for sharing!

Please contact Suvie!, The same was happening to me, I contacted support. If the Dry Ice is all gone any any of the food has started to thaw. Dont Eat it but through it away. There food is way too expensive to accept any way but perfect. You will also find the bags unzipped a little and if frozen that is OK.

It was fun to put together, I thought it was going to be hard. The bench has not looked this clean, Now to get the printers off the floor.

Nope, it will not fit in alot of resin printers., this is why manufacturers need to include internal vat heating on all new printers.

Also will never use glue stick on PLA. 100% perfect prints hundreds of times.

I love the cool sheet, it works very well for me. The textured I always get a fail for not sticking. :)