Видео

Im getting one Hopefully this brand works without Flickering and blinking

Hello

. Typical firefly crap.

What the fuck is a par light?

thank goodness it was just the fan, would’ve assumed it was some kind of electrical short from that noise

I think it's a nuclear generator for a sec😅

Sounds like 0 point inspection to me.

First i heard about the bridge alignment on the Eart. I guess it's something to check. Maybe you get a replacement from GFS that would fit better somehow. And you did it right. Use your fingers to get rid of the plastic finish. You don't want to damage the fret when you get rid of the plastic. If you want to then do a fret job you can still do that.

Hi.

Hi.

I have a headless Eart and I'm happy with it.

Good stuff dude!! The end result looks great.

is that my favorite Marshall MG250 sitting there ? ... or what is that ?

Hey...I worked hard to dent the crap out of them! Now I have to start over😢

Nice. Thanks for sharing

Thanks for the great video! It made me buy the exact same model as you have. I thought I'd send it back if I didn't like it. But I fell in love with the neck immediately. So I kept it! Do you remember, if the bridge cavity is routed to fit a humbucker as well? Or would I have to chisel myself?

There is more sustain from the Fender.

EART

Unless they know how you are going to set up the guitar, there is no way they can do a proper Plek job. That's why I have my local luthier do it. And I never noticed you checking the neck's relief, which is always going to be a problem with guitars that are being shipped.

Thx Dustin, I have an Eart Tele along with five others . The Eart is a great guitar. The value is rising. The neck is fantastic but my other fav fender tele has a longer neck. Slightly. Not enough to really matter .

My man, you're a genuis!

Thank you so much! I wasted so much time trying to figure it out for a client. This is MUCH appreciated!

Nice Job Dustin!

I just got a RG550 off Sweetwater recently. And the set up was spot on. And nearly perfectly in tune. But it did come from the Fujigen factory in Japan. So the setup was probably not because of Sweetwater

Pleck is not worth it, trust the factory settings, they've got me now running back and forth with taylor guitars and may not even refund me after doing irreversible work on the guitar like shaving the frets down, the factory settings are for a reason, taylor undid what they could but now I'm stuck with an unoriginal factory model that I just bought brand new a month ago because the luthier that worked on my guitar shaved the nut too low and they had to replace it, but the fret work is irreversible without a refretting of the instrument... Buying the Plek was a huge mistake and not worth it. A lot of guitars that sit in their warehouse just go out of factory spec, so they do NOT deliver your guitar as if it just got out of the factory. It looks like it but by no means does it play like it. Trust the original makers to do the right thing. Sweetwater is not doing justice on their plek... nor the customer service for my first time experience. You'd think it's reasonable to get a 300 dollar refund plus 100 dollars compensation for my time 4 hours of driving and 160 miles total round trip to dick around only for Taylor guitars to undo what Sweetwater did.

Plekking is bs, the guitar should be right from the factory. Funny thing is they offer plekking even for an esp ec1000 which is plekked from factory, waste of $300 in my opinion.

Two years ago I sold my FM3 after a few weeks because lack of gapless amp switching was a deal breaker. Never bought the FM9 because of the bulky size. Now I might buy FM3 again!

1:29 could've just hit the amp button and gone straight to it :)

When I work on guitars and amps, part of the process is to see how it plays along the whole process. Plek cant play...

Sorry you had a crap experience. I just purchased a Andy James B.C. Rich Assassin several months ago and had it Plek'd And boy did it come out fantastic I have zero complaints with my experience. although I agree on the price point...it should be much cheaper.

The Yorkville EF15P with a BBE 882i maximizer will eat those RCF up … 🔈|ō|

That is NOT a $300 job, sounds like a regular Strat, I'm currently having a debate over at the comment section of the new Sweetwater video about Plek, and your video just proves my point. Lovely guitar, though!

Used to be, if your guitar had a buzz, you'd just bring it to you local mom and pop music store, and they would fix it. Now people ship it across the country and back and get it back not fixed. Nobody serious buys their gear from Sweetwater, much less has them pleked by them.

I would love to see a video about your thoughts concerning the EV ETX series

They are not really in an array if they are ground stacked like that.

Does it work with a battery

Are the Brass Barrel Saddles adjustable and intonatable?.

I was wondering about putting a wedge drum monitor behind me.

Nice Setup! It was cool to see ya put that all together! When you're cleaning up the cables after everything is setup, do you use cable crossover covers at all? When you mention cleaning up the cables, it made me think of how we use them on set. They can come in handy to prevent tripping if cables are in heavy foot traffic areas or if cables are in the path of carts or gear with wheels. Anyway, this was a great video! :)

I own a handful of nice guitars, and my buddy, who also has plenty of real Gibsons and Fenders just talked me into one of these. He has a number of them and says all his just needed a simple set up. If it arrives in killer condition, great. If it comes like yours, I'm stoked to have something to practice fret filing and other deep set up stuff on before I dive into a fret job on a boutique acoustic I have. At $200, I'm not expecting much.

Thanx for takin the time putting this up. I am looking at buying some subs, but the logistics of getting them there is the challenge, too big and heavy to throw in the pickup bed. Hoisting up those speakers on a pole, yikes. I run just two K12's and had no complaints, I fill with 2 Yamaha DXR8s. Do you really need that many subs? lol.

Ant problem with clipping???

Prefiero comprar un rcf de un italiano A comprar cosas delos españoles

RCF is the best. They have the widest product range, made in Italy, not the shitty China. They look great, sound great, not heavy like competition. If you think HDL series sound good, wait till you hear TTL series, or even GTX series which is competing with the likes of L-Acoustics, D&B and such.

still prefer hybrid route used td27 and vad506 and hi hats etc still don't track right vs other kits like the efnote

I’m a DM for a couple of groups in LA and I’ve been using a hybrid kit for over a decade. We’ve used this setup for Arena shows as well as clubs and backyard private events. Now with companies such as ddrum building full kits with acoustic shells and built-in triggers, and companies like Jobeky creating fantastic basket trigger systems, it’s easy to make the jump. I recently built a hybrid 6-piece kit with upgraded dual zone triggers and XLR outputs hardwired into each drum for less than a cheap acoustic kit.

I got a more top line Schecter with ebony board and stainless frets. I wanted it Plek'ed to be perfect. A Plek machine is designed to make the guitar neck perfect but it is only as good as the operator and the trained technician. Also a comment on the supposed set up point inspection: I got this guitar out of the box seemed OK, frets looked evenly machined. Then I noticed they had screwed my stop tail piece all the way down to the wood so the strings were grounding out on the back edge of the bridge. (Some LP's can screw down with no issue of clearance, some cannot, and Gibson will tell you it simply does not matter as that is string tension and a user feel thing. BUT they stipulate one DOES NOT GROUND OUT the strings on the edge of bridge, EVER! I also noticed the strings would ping on the thinner ones as the nut was too tight and obviously had not been done by the Plek machine. I gave them the Strings I use but clearly the nut slots had not been scanned. I was so mad I did not stop complaining till they refunded my $300. I could set a guitar up better than these nits half drunk and up all night.

I bought an Ibanez RG from Sweetwater a few months ago and had it plek'd. It buzzed a little when I got it but they had the action set really low. I checked the frets with a rocker and all the frets checked level. I raised the action slightly and it plays great. I just bought an LTD ec-256 that was a demo from them. That turned out to be a great guitar for the money.

Another issue with it is that the guitar doesn’t have a roasted neck so through out shipping the guitar is experiencing many different temperature changes which twist and contours the guitar neck making what the work the sweetwater shop did basically useless as you probably are in a different temperature zone with different humidity. It’s a nice feature but it only actually benefits higher end guitars unfortunately.

Great…. I just purchased the hdl 30’s 8 of them…. I wonder how it would sound , with 4 bass boss Makara dual 21 inch subs