Видео

@robin.2009. really grateful for your kind words! Get on with it and make sure to enjoy the process too, I'm excited to see how yours turns out. Please check out the other projects/videos as well if you haven't already. Cheers!

@@mrltnj hey, i already watched veryyy many of your videos, i spend like 2 hours watching ur videos, and i will go buying the materials soon. i will inform u if im finish with my project!! Cheers

@@robin.2009. Thank you so much for the watching the videos. You just made my day!

@@mrltnj no problem bro ur making my day by doing this AWESOME and WONDERFUL videos, keep going, and also never give up what u are doing, bcs there are veryyy many people that also loves ur videos, just like me!! Have a great day, and stay safe!!!

@mauriii798 gracias!

@trippie_stunts Foam core board 🙂

@xdriftsoulx Thank you! 😊

@remijrdanting3592 water based one made by acrylicos vallejo

@scaleffect thank you!

@PJMCollectibles I was planning on doing that until the fear of getting a copyright strike won over me. 😂

@@mrltnj yes. the dreaded copyright strike 😬 my fave from moog is the kei to the city soundtrack. got it saved in my driving tunes playlist.

@Frozztti thank you, mate! Let me know how it turns out. Cheers!

@haminoalpaco9798 Hi! Glad my diorama inspired you to do one as well. Materials used were foam core board for the structures, cardboard, skewer sticks for the pipes, acrylic paints and cyanoacrylate glue. Looking forward to your creation. Cheers!

@therealniiabossey craft shops and printing shops carry foam boards :)

@tximet2yt318 I use water-based acrylic paints

@tximet2yt318 if you're pertaining to the white-green-white stripes, i think it's around 10cm apart.

@Fer00784 sponge 🙂

@tximet2yt318 Dimensions are 23.5cm(w) x 25cm(d) x 6.5cm(h)

@pingkalinkamei4781 thank you! It's called cyanoacrylate glue.

@prnxja acrylic paints by acrylicos vallejo

@Szymek_wot base is 6mm thick foam core board

@SH-ih6nz yup, primer gray :)

@Bihasa08 glad you liked it!

@@mrltnj can you teach mo how to make those boxes. Or where can i get one?

@Bihasa08 what I did was to create box templates. Gathered the logos via Google and used it in Photoshop. Printed them and wrapped individually around different sizes of foam boards.

@malcolmxkennedy4552 any store that sells Tamiya model kits and other plastic model brands carry this kind of masking tape. :)

@malcolmxkennedy4552 I believe it was cold grey/gris frio by vallejo game color. To answer your other question, it was just a regular sponge. Hope this helps!

@cookiecollectors3336 Hi! Are you pertaining to where I order them or the brands that made the cars?

Both

@minimoh5037 cars are from various brands, MiniGT, TLVN, Inno64, etc. All bought through local resellers :)

@JoaoSoares-vl1cs 3mm thick foam core boards. You can also try 5mm ones but they're kind of more difficult to cut straight.

@kisnaknugroho1801 thank you! really wish I could but now that its built and stored, it's gonna be very difficult for me to backtrack every measurement of every piece. I'll try to include it though in the future videos!

@kisnaknugroho1801 thank you! i really dont use a bluemap or blueprint as I make these as I go with the projects. Will try to include measurements in the future videos :)

​@@mrltnj😂 it's okay bro, yeah maybe in the next project you will include the blueprint or something like measurements

@ungurdani8346 glad you liked it and thanks for the sub too. Cheers!

@r.diecast7968 3cm (w) x 2.5cm (d) x 5.7cm (h) 🙂

@uripsucipto8737 most of it I got from google and just resized during printing. Some are made by me.

@xvierrr420 yup, the one sandwiched between paper. I use the sturdier ones as they are less prone to warping/bending. But if you only have access to the less sturdy foam boards, i suggest you reinforce them to from the inside or use thicker ones. :)

@@mrltnj i only managed to find 3mm ones, can share any ideas how to reinforce it? i tried glueing it so it became 6mm but it doesn't always have a clean finish

@@xvierrr420you can try glueing larger pieces together before cutting to your desired shapes and sizes, gives it a clean finish. If you’re using it for walls and such, you can just use a 3mm for the facade and add vertical and horizontal posts on the inside using the same material. I’m really hoping I was able to explain this well 😅

@@mrltnj i think i get it. what bothers me are just the foams just warped even though i glued them to a hard cardbox paper. anyways, thanks for your answers. looking forward for your next videos. surely i will take inspirations from them

@davetalbot498 3.00mm thick foam core boards. Thank you for watching!

@33asy Hi and thank you for the kind words. Glad you liked it. Been planning on doing Sheldon and Leonard's apartment for a while now, just cant seem to find what to use for Sheldon's DNA model and of course, the time to do it. Hopefully soon!

About length, width, height of formex sheet

@NguyenLe-uo6is havent taken notes of the measurements and this one’s already on storage but iirc, base is 20cm (d) x 30cm (w), garage facade is 15cm (w) x 8.5cm (h). You can use those numbers as basis 😊

@Sergio-tn8rw Merci!

just make the first line with the cutting pen not to hard, until you get kinda deep cutting line

@johnandregomez8343 start with light scribes and a ton of practice too! :)

@jagoanneon722 thank you!

@johnandregomez8343 measure twice, draw/cut once :) I refrain from using transparent ruler because it tends to have dents and crooks overtime. Metal rulers are safer for the hands too when cutting the materials.

@Freelanceken acrylic paints by Acrylicos Vallejo

​@@mrltnjIs it a water based acrylic paint?

@johnandregomez8343 it is :)

@canalberna foam core boards :)

@@mrltnj thx

@Exit_164 foam core board :)

Thank you!

@NgocTuanPham-sb9zg Hi! Unfortunately, the only files I keep after the builds are the raw video files. So sorry for this.

@@mrltnj Ok. Thank you!

@meeruladeeb8661 yes, specifically acrylicos vallejo brand. 🙂

Thank you very much 🙏🏼

@agentebond8782 Hi! I used the cars and human figures to decide on the measurements of the structures (make sure to use true 64 scale cars). I drew sketches on paper first until i'm satisfied with the way it looks before I use foam core boards.

@@mrltnj oh really thanks, great point. in your opinion which brands are real 1/64

@agentebond8782 Kyosho, HobbyJapan, Inno64, and MiniGT are good examples. I find Focal Horizon and Street Weapon very appealing too especially those GT-Rs, Stageas and RWB Porsches, if you're into those cars.

Paper clips 🙂

@@mrltnj thanks bro

6.00mm Foam core board 🙂

I used 1.5mm and 3.00mm foam core boards. Glad you like it, thanks!

@pierreriot2320 hi! I've listed the materials and details in the video. :)

@djevo3441 thank you sir!