- Видео 31
- Просмотров 757 885
Mike's Garage
Добавлен 24 июл 2017
Doing the things I like doing in the Garage. Off-Road Upgrades, Small Engine Repair, Rustoration, and some Electronics
2005 Arctic Cat Front Diff Stuck Axle Removal and Disassembly.
Removing the Front Diff From the Arctic Cat.
Found a Trick to remove stuck Axle.
Found a Trick to remove stuck Axle.
Просмотров: 1 190
Видео
2005 Arctic Cat 400 Axle Removal. The Struggle is Real!!
Просмотров 1,7 тыс.Год назад
Trying to Remove the Axle! Not Going Well!
E-Ton TXL 50 Will She Run? BAD GAS? Dirty CARB? BAD CDI?
Просмотров 374Год назад
E-Ton TXL50 I bought of Marketplace. Guy said it ran. I'm sure it did at some point in its life.
2005 Arctic Cat 400 4x4 FIS Front Clip Removed & Questions Video 4
Просмотров 621Год назад
2005 Arctic Cat 400 4x4 FIS. Questions about the Bike and Front Clip Removal. Feel Free to Comment. Also Feel Free to Subscribe and Hit that Bell. Thanks for watching either way. Paint Choices. I like Grey and that's Probably what I will go with. Should I run a poll? www.amazon.com/Rust-Oleum-7587838-Professional-Performance-Machine/dp/B000LNQ9L0/ref=sr_1_5?crid=WL2JSFYPUQQO&keywords=rustoleum ...
2005 Arctic Cat 400 4x4 FIS Carb Removal, Rebuild and Replace. Will She Move? Video 3
Просмотров 4,2 тыс.Год назад
Rebuilding the Carb on the Arctic Cat 500. Loud Noises so watch your ears!! Easy Now!! I have never Rebuilt a Carb like this. Please like Subscribe and Click that bell. Help a guy out. Rebuild Kit www.amazon.com/s?k=arctic cat 400 4x4 FIS Carburetor rebuild&crid=1QCFM77MU3DVJ&sprefix=arctic cat 00 4x4 fis carburetor rebuild,aps,273&ref=nb_sb_noss OEM Carb Used www.ebay.com/itm/255824208767?epid...
2005 Arctic Cat 400 4x4 FIS Starter Solenoid Replacement Video 2
Просмотров 3,4 тыс.Год назад
2005 Arctic Cat 400 4x4 FIS Starter Solenoid Replacement. Solenoid www.amazon.com/dp/B0821JNYBP?psc=1&ref=ppx_yo2ov_dt_b_product_details
2005 Arctic Cat 400 4x4 FIS Refresh? Will She Run? Video 1
Просмотров 5 тыс.Год назад
Project Arctic Cat 400 4x4 FIS. First Start on The Rusty Cat. Find Your Model Here www.bosscatlegacy.com/sitemap/sitemap.htm Down Towards the Bottom of the Page for Years. Find Parts Diagrams Here www.babbittsonline.com/oemparts/c/arctic_cat_atv/parts
Custom Welding Cart DIY
Просмотров 6373 года назад
I created a Welding Cart for my Needs. This video took me about a month to make due to my injury. I hope this gives you some Ideas on how to create your own Welding Cart. Please Like and Subscribe if you found this content at all useful. Thank you. 🥽
Campbell Hausfeld 60 Gal Belt Tensioner mod
Просмотров 2893 года назад
Making a Belt Tensioner for My 60 Gal Air Compresor. I opened a Patreon page. please consider helping out. All earnings will go to this channel to make it better. Like a New Camera!!! www.patreon.com/mikesgarage
Honda Pioneer 1000 Cage Chop
Просмотров 7 тыс.3 года назад
Chopping the Cage on my Honda Pioneer 1000-3. I opened a Patreon page. please consider helping out. All earnings will go to this channel to make it better. Like a New Camera!!! www.patreon.com/mikesgarage
Bar Table / Industrial Table / Rustic Table
Просмотров 654 года назад
My Buddy wanted a Bar Table for his garage. This is what I came up with. I hope you Like it. Please Hit that Like Button and Subscribe. I opened a Patreon page. please consider helping out. All earnings will go to this channel to make it better. Like a New Camera!!! www.patreon.com/mikesgarage
Ceiling Fan Capacitor Replacement
Просмотров 16 тыс.4 года назад
Replacing Capacitors on My Ceiling Fan. I opened a Patreon page. please consider helping out. All earnings will go to this channel to make it better. Like a New Camera!!! www.patreon.com/mikesgarage
Portable Band Saw Stand Build Part 2
Просмотров 2184 года назад
Making a Stand for my Milwaukee 6238-20 Portaband I opened a Patreon page. please consider helping out. All earnings will go to this channel to make it better. Like a New Camera!!! www.patreon.com/mikesgarage
Portable Band Saw Stand Build Part 1
Просмотров 2194 года назад
Making a Stand for my Milwaukee 6238-20 Portaband I opened a Patreon page. please consider helping out. All earnings will go to this channel to make it better. Like a New Camera!!! www.patreon.com/mikesgarage
Welding Table / Work Bench
Просмотров 1404 года назад
Welding Table / Work Table Build Sorry there is no music. I am still new @ this. I opened a Patreon page. please consider helping out. All earnings will go to this channel to make it better. Like a New Camera!!! www.patreon.com/mikesgarage
Milwaukee Portable Band Saw 6238-20 Repair Part 3
Просмотров 1,6 тыс.4 года назад
Milwaukee Portable Band Saw 6238-20 Repair Part 3
Milwaukee Portable Band Saw 6238-20 Repair Part 2
Просмотров 3,1 тыс.4 года назад
Milwaukee Portable Band Saw 6238-20 Repair Part 2
Milwaukee Portable Band Saw 6238-20 Repair Part 1
Просмотров 8 тыс.4 года назад
Milwaukee Portable Band Saw 6238-20 Repair Part 1
Polaris Ranger 900 30" Light Bar and Light Bar Install Part 2
Просмотров 5194 года назад
Polaris Ranger 900 30" Light Bar and Light Bar Install Part 2
Polaris Ranger 900 MTX Sound Bar and Light Bar Install Part 1
Просмотров 5 тыс.4 года назад
Polaris Ranger 900 MTX Sound Bar and Light Bar Install Part 1
2008 Arctic Cat Wheel Bearing Replacement. Video 4
Просмотров 4,9 тыс.4 года назад
2008 Arctic Cat Wheel Bearing Replacement. Video 4
2008 Arctic Cat Ball Joint, A-Arm and Brakes. Video 3
Просмотров 1,7 тыс.4 года назад
2008 Arctic Cat Ball Joint, A-Arm and Brakes. Video 3
2008 Arctic Cat 500 Front Diff Seal and U-Joint Replacement Video 2
Просмотров 12 тыс.4 года назад
2008 Arctic Cat 500 Front Diff Seal and U-Joint Replacement Video 2
2008 Arctic Cat A-Arm and Axle Removal. Video 1
Просмотров 3,4 тыс.4 года назад
2008 Arctic Cat A-Arm and Axle Removal. Video 1
Can Am Commander 1000 Repair and Upgrade Part 2
Просмотров 3,1 тыс.4 года назад
Can Am Commander 1000 Repair and Upgrade Part 2
Can Am Commander 1000 Repair and Upgrade Part 1
Просмотров 3,8 тыс.5 лет назад
Can Am Commander 1000 Repair and Upgrade Part 1
I have a buggy I think it’s a spider 300 I need a wiring diagram if you can help thanks
if anyone can help me i would really appreciate it. ive replaced the coil, stator, cdi, sparkplug, everything that you need to get spark and n o matter how many times i change them out i get no spark.
Good video but if you plan on doing more please get that camera focus fixed. Was hard to follow.
I got to save little Chinese moped however I need a chain for mine where you think I can get it at super weird little lynx
Mike, I thank you very much for you making your videos. I struggled the whole day. We’re trying to find out why I didn’t have spark and the keyword you said in this video is check your connections and dog on it. If it wasn’t the connection I wish you well I hope you make plenty of more videos that simple with keywords thank you so much. 😄🫵🏻👍👍
Will the key still kill the bike without a kill switch hooked to the cdi?
I am trying to get spark on a Chinese go-kart. I put the kit in it that has the new cdi, regulator, coil, and solenoid. I can get it to turn over but no spark. Every time I connect the hot wire back up it chirps loud two quick chirps. I have found the remote kill box and should be able to just unplug it to get spark. But still no spark. The neighbor owns it and list the fob. I sure would appreciate your input.
My lights don't work
NO NEED TO HEAT THE NUCKLE THE BEARINGS ARE A 2000TH" PRESS FIT. CAN BE DONE WITH NUT AND BOLT METHOD.
FILTHY MACHINE!
Don't know if anyone will see this but I got a little 72cc china bike and I got it running great and I was trying to hook up the ignition wires so I could have lights and I touched 2 of the ignition wires together and pop, now it just cranks, I checked the only fuse i can find and it looked good i swapped it with a different one just in case and it didn't work. If anyone has any ideas please let me know as this is basically my little get around quad. Please and thank you
Probably burned the rectifier/cdi, maybe?!?
Hi can you run the engine with the charging wires disconnected thanks Mike from england
The one I was working on would start up and lose spark shortly after, I unplugged the remote start and now it stays running.
You got the camera so far away how you expect us to see what's going on
so what is your set up it looks great but can you do a build break down for me year, model, rims tires, any other mods? I love the chopped cage I see a lot of guys do it but what do you end up doing for a windshield I never see anyone post anything?
How do u get the castle nut off mine is tight and will not budge! Need to replace front axle.Thx Heat, everything what is the trick?
Would it be the same location on a 2003?
On a artic cat you have to have the left brake lever pulled back or it won’t fire when starting
Adjust the idle down ,it won’t shift idled uo
Nooooo!!! Bro, we came to you for the solution to getting the drive wheel off!!! We feel your pain!!
hey next time get a little cheap exaust expander and you can fit it back one over the other
What if my stater doesn't have a black and red wire?
Thank you sir!
I Tao Tao 125 for free from a friend of mine for my son. I had it running good. Now no spark new harness cid box coil and i am still get no spark at the plug. suggestion?
Going through same crap
Thank you so much sir!! Awesome video, this helped me alot! For those wondering this worked on my 2020 cf moto 600 ATV
On the bottom of the carburetor is a little nipple. Is there a hose that connects to it? If so, where does it go to
Chopped the cage on my 700-4 , they look so much better with the shorter cage , with my cage chopped I can fit mine in the grange on the 30s now
Yes they do. Thanks for the comment.
Bought an old Yerf dog CUV rover…ran great until yesterday,,, no spark! Your video will help in troubleshooting. I am very familiar with the Japanese big 4 UTV’s and ATV’s wiring,,, these are bit different THANK YOU
Your idle is to high thats what makes it hard to get into gear, the idle screw is that knob on the end of the tube/cable on the side of the carb.
Yes what does that other Square black box that mounts under the seat do
Thanks for this video 🙏
great video but you should of left out the trump flag
Very useful, thanks for sharing, all the best to you and your loved ones
Can the gear wheel with the worm (the smaller gear wheel in the gear) be purchased separately? do you have the catalog number for this part? Thanks
www.repairtoolparts.com/milwaukee-parts/milwaukee-6238-20-(d52b)-parts-list#Layer_1
I'm gonna go try it see if that works now if I do that and still no spark how will I know if it's the cdi coil or stator and what about the rectifier isn't it supposed to be in there somewhere please you have other videos on these
You would need to ohm out the stator. I'm sorry I don't have the values of what they should be. The Voltage regulator is for charging. You don't need it to run. I don't have any more Videos but I am planning on making some. Life has been crazy. Thanks for the comment
I think a diagram would have help better, i think the cdi have more than 4 terminals to connect wires
I was going to put up a diagram but I thought the video covered it well enough.
Well just that little bit is gonna stop it fdoing what i'm supposed to do
I dont understand the question.
Needed the battery to run did it
I have a 2002 500 and I suspected the regulator/rectifier was bad. When I removed the cable from the battery to test voltage out of the regulator it would just die. Guess it's a DC CDI and needs the battery. Glad I looked into before getting stuck in the woods.
Susbacribed mate
Thanks. I should be getting back to this soon. Work has been crazy.
Mike I know this video is old but I need your help I’ve asked atleast 20 people and no one know how to help but I can’t find my exact part mine has 3 wires plus the one for the sensor but when I look up the part I can’t find any except a 3 wire plus 2 wires I could really use your help I tried wiring your system up wire from wire but my magneto doesn’t have the same wires I wired each of the 3 up after figuring out which one ran the sensor but out of the 3 wires I tested all 3 with no clue which one to start with and still no luck Thanks for reading this and thank you for helping you definitely have my sub
Maybe its an AC system? Is it like this? www.ebay.com/itm/394752655168?hash=item5be9177f40:g:4sgAAOSwXIFkEOA0&amdata=enc%3AAQAIAAAA4Ff0Qv3UNGUqQmOf24esgkdXhlq196te9gW4seDSwJ8TimIZUShF0gEoL9cdVeDmPnxLq8MIhNOzNRCI3f0tMow8WhDSUIqHlXdefzhHz%2FwaMbtvOffFW3kgstzPAQUU5gE%2B6hC9pymGD3gE4VXI0rgLPUbjaIcNDyO46NcO1n%2FDOwdDtEQMWekcH9of1AwSVO09CzibLmHn2aNLg9rYlhedcKvV5V%2Bs6aCxIgEVttEwdk6j%2FQ2IgcQiXEh7J4rUjP09uOHy0Zvu8ZX8bWe5dFXT1vTOcGt6dUkiFnPi9o2B%7Ctkp%3ABFBMpsbonfdi
i liked and sub plesase more vids on chinese atv trouble shoot thanks
I will when I get a chance. Still Laying floors in my house.
@@mikesgarage9757 question are stators are interchangeable example if i have a 2 pole and i get a wiring kit with a 6pole stator
@@Random.Adventures. Honestly I can not tell you. I have not seen a two pole. Does your unit have a battery or is it just kickstart?
@@mikesgarage9757 battery but i got it thanks I just had to match up the stator
Thanks for the video
No problem hope it helped.
Would it be safe to ride without the kill switch like that?
No. I stated that in the video.
I have a atv with a lock and unlock key pod can that be stoping the spark
Yes. Probably the black wire on the CDI.
You are the shit ive been messing with this atv for months trying to figure out why i haven't been getting a spark and everyone else shows how to hook it up wrong and i thought why not try what this guy is talking about and boom i got spark finally wish i would have found your video sooner thank you so much im definitely subscribing and anyone who is in the same spot i was do what hes talking about theres no need to keep looking at other videos that get you no where 🎉
Awesome! I'm glad it helped out. I tried to get to the point. I see alot of videos on here that tell you how to do things but it's confusing when they explain it.
the only part im stuck on is how he wired the switch that is between the poles. he said there is no magic there but i honestly know nothing bout quads or electrical wiring. can anyone help me out
Hi Mike, I could use help. 110cc Tao Tao. Died during cold cranking after winter. Battery is good, 13.1 volts measured. New solenoid and CDI. Lights work. No click sound from solenoid or starter. Tried jumping solenoid and get nothing. Could it be this start switch?
If you jump the solenoid with a screwdriver and the starter does not turn probably bad starter. You can push the starter button and see if you get voltage on both sides of solenoid. One side should always be hot. If you get it on one side and not the other the solenoid or switch has an issue. Try tapping on the starter with the wooden handle of a hammer then jump solenoid maybe its just stuck.
@@mikesgarage9757 Thanks. It's up and running. New starter and solenoid and start button. Pretty sure it burnt up trying to start it late winter too many times.
where does the 2nd wire for pulse go
Charging wire probably. I think it goes to voltage regulator. It has been years since I have looked at it.
Hello if you would lead me in the right direction. I was given a Chinese 4 wheeler kid's version. Wiring is toast. With the way you are wiring just to see if this thing will fire or at least get a spark .What wire do I use for a turn on switch. . I'm not a mechanical engineer or a electrition. Just trying to find out if I should junk it or get it fixed for the kids. . Don't want to invest unless it's worth it.
Just a push button. You can get a kit for them cheap on Ebay. These engines hold up well. its the bike that falls apart around them
Very hard to figure out. Ur smart
Glad it helped.