Видео

It’s the connection board: us.store.bambulab.com/collections/spare-parts-circuit-boards-ams/products/ams-connector-board

WOW!!! Thanks for the quick reply! I just ordered one and thanks to you and your video I will hopefully be up and running again. I'll definitely subscribe.

@3Dprint4you Great, glad to hear that. Hope it works out for you.

Great! 👍

You’re welcome 😊

I use IPA (check the description).

Glad you enjoyed it!

That’s fine if you rather replace the nozzle. I don’t, and I usually can get printing again in no time without having to change the nozzle.

@@techwithkramer we change nozzle on ender printer once a month. so is bambu lab using titanium or some steel alloy? I assume the nozzle will not last a month with wood filaments

Yes,you are correct. I added some text to it but it’s not always showing -depending on what device the video plays.Luckily, it works both ways (to my own surprise).

Thanks - sorry we didn't meet in time….

You are very welcome!

You're very welcome

Great, happy it worked out for you!

Great to hear!

Yes, you are correct. Even though it works both ways, the “hat” should be on the screw side. I added the correction as text but seems like the text is not showing depending on what platform you use.

Great, glad you’re back up and running again!

Good tip!

Thanks 😊 for your nice words!

😃

Thanks for the nice words. 2 years without clog - that’s great! 😃

@@techwithkramer No problem, but I should say the X1C has been running two years, and the E3D Obsidian was a recent purchase in the last four months or so, but I was running 0.6mm nozzles and filled filaments from early on, and I am impressed with the lack of clogging and lack of oozing I’ve had all the time up to this with this printer.

Wonderful!

You're welcome!

Thanks!

You are very welcome.

It might be a broken ptfe tube - check all of them, specially the ones inside the AMS.

There is a black ring where the tube goes inside, press the ring down while pulling the tube out.

Glad you liked it, thank you for your feedback.

Glad it helped, thanks for the nice feedback!

Thank you, more to come...

I am using Fusion360, however, I would say that most of the design could be done with a less complicated software. I am recommending to use Tinkercad to start with as it is easy to learn and still very powerful - and its also free.

Thanks!

You are most welcome

Thanks. I use Fusion360 and Nomad.

Thanks What is nomad

Nomad is a software for iPad that is affordable and does organic sculpting, works very well.

Fantastic!

Great to hear!

Thank you! Will do!

Thank you for the compliment. Sounds like a synch problem. There is a symbol - I think it’s where the filament is to the right, its a little printer symbol with 2 arrows showing in opposite directions - to re-synch the software with the printer. I am currently on a trip, so I cant exactly tell you where its is, but you should be able to find it.

@@techwithkramer I'll try to find it, but I shut down the PC and the printer, didn't help at all. The printer has the colors right and where they are.... on the small display, but the software can't resolve the problem. Thank you so much for a quick reply! Have a safe trip!

@@techwithkramer So far nothing is helping my problem. I uninstalled Bambu from my PC and start over, like the day I recieved X1C. Shut down PC and did the same with X1C, and after all that I turned the pinter on ON. The first was the printer - I removed the filaments, restore printer to factory settings and I inserted all 4 filaments, not the PLA-SUPPORT filament! Turned back the PC and installed BS and went thru the settings..... But as soon I open the file I could not print, it behaved exactly like before! So I installed brand new BS on a PC and I was able to print again! It was a puzzle, but when I wanted to print more items from that folder, on my PC that is a desktop running Intel i9...., it behaved like my laptop, I could not print at all! This is behaving like a bug in the software or some other undocumented function....???? Does Bambu send to them, from my PC info about BS? Since it worked once on my desktop, but the next print could not happen, just like the laptop! I'm gonna remove not just the BS program but also all the info in the registry and folder where BS was installed at. I'll do this on my laptop as well, and I'll reset the printer one more time - I hope this will work. Is there a phone number one can call Bambu to get help? Or a direct email that would get answers to my problem? Thanks again!

So far there is no phone number. Hopefully sometime in the future. I use a MAC, so maybe this is a PC specific issue. Good luck on figuring out the rest.

@@techwithkramer Thank you again and have a great day!

Thank you very much ch for your nice words! Glad I was able to make a difference.

Glad you think so!

There is a black ring that you need to push down - wiki.bambulab.com/n1/maintenance/ptfe-tube/press_the_connector.jpg

Excellent, welcome back!

No problem 👍 Glad you enjoyed it.

You are very welcome.

Glad it helped!

Wonderful!

You are very welcome. Thanks for watching.

Hmmm, interesting. Seems works both ways, no issues at all, it prints just fine. Thanks for the heads up though.

I am printing none stop since the video and no issues. So maybe it doesn’t need the hat at all? It’s odd though….

Thanks, make sure to subscribe so you don’t miss any future videos.

You're welcome!