Видео

@@MAGNUSDRONES That might have been my issue with the the aircraft firmware update, so I think you're probably correct on that. The thing that still got me puzzled though is why it changed the fly app back to v1.13.9. The v1.13.10 was what I had updated to before I left to go fly after installing the controller firmware update to v02.02.0300 at home. I guess at this point it's kind of a puzzle. Thanks so much for the comment and be safe.

@@WeretheRoberts I couldn't think of anything else to call it except a marathon haha. I know what you're saying about the Air 4, 3S. For me it'll be a pass being I just bought this Air 3 a year ago. It's a really good drone though, so I don't know what they could do better other than the cameras but, I guess we'll find out. What I've heard there's nothing wrong with that Phantom 4 except the age in technology. It sounds like the new Air 3S or 4 might be coming out soon and if you could wait a little longer maybe you could wait and see what it has to offer before buying a Phantom 4. Just my thoughts haha. Everything about this health issue has been kind of a struggle. Now my treatments got backed up a little bit so I start next week finally. I'm going to try to keep doing what I can with the drones and I was able to get this one in there before all this crap breaks loose. Thanks for asking. Take care. God bless!

That is a fact😬. Thanks for the comment and be safe.

Thanks for the comment and be safe

Can I ask where you're from? I only asked because certain rules and regulations are applied in different countries.

@@dk4drones thanks i m from pakistan

I don't fly my drones inside but, if the drone Advanced RTH is set to Optimal, the drone will fly an automatic route and avoid obstacles when in (optimal RTH) that mode. You can manually set to the RTH in Preset Mode or manually land the drone once the drone goes into RTH mode, just cancel the RTH by tap the RTH button. There are a lot of things that happen when the drone goes into RTH mode and one of them is how far from the home point the drone is and that will determine the altitude as well. Also lighting condition and obstacles to name a few. All this is covered in the user manual starting on page 50. Hope this helps, Thanks for the comment and be safe.

@@dk4drones oh sooo thanks really

@@dk4drones now open pdf n read page under urs guidence.thanks again

This was video was done in September of 2020. Wow how time flies, it seems like yesterday! Thanks for the comment and be safe.

Just one. The whole mission took about 14 minutes flying at about 8 to 9 mph. Thanks for the comment and be safe!

@@caesar5555 No, The RID is only activated with the plus battery on the Mini 3 Pro and the Mini 3. Your good. Thanks for the comment. Have a great day!

@@dk4drones Thank you. With the PLUS battery the Mini3 RID is activated ONLY when it is inserted into the drone, otherwise it is not activated. Correct?

@@caesar5555With the Mini 3 the plus battery will broadcast RID only when it's inserted into the drone. That is correct. My bad. I said not in my comment 🥴 and corrected it. The RID is only activated with the plus battery on Mini 3 Pro, Mini 3, as well as the Mini 4 Pro. The Mini 3 Pro on the other hand will broadcast RID with either battery. Hope that helps. Again, thanks for the comment. Be safe.

Thanks as always my friend. It's seem like a long road already with a long road ahead of us, keep those prayers coming 🙏. I thought if anybody could think of another waypoint you would be able to Haha. Again Thanks! God bless!

Steve, Thanks for the comment, and I agree it is the most underrated future. I hope to be well soon! 🙏 Be safe, and have a great day.

Thanks for the comment, much appreciated. Be Safe!

www.amazon.com/dp/B0BY8W3PCZ?psc=1&ref=ppx_yo2ov_dt_b_product_details

@@ty-k6708 Yes, only the Mini 3 Pro will broadcast RID with the standard (149g) and plus batteries. Thanks for the comment.

I don't know of any way of putting in GPS coordinates to fly a waypoint mission in the DJI fly app. I guess if you know where the buoy is you can pin it on the map and try to do it that way. Just a thought 🤔. I know there are third-party apps out there that use GPS coordinates for mapping but I don't know if that would work for you or not. That is something you could check out I guess. Sorry I can't be of more help. Thanks for the comment and be safe!

Thanks for the comment, I try my best 🥴. Be safe!

Are you implying that I am or that we are all sheeple on this issue? I've had no issues with my DJI Mini 3 Pro. I am just trying to explain the different ways the RID works with each given drone. Thanks

I would have to say no, because the Mini 3 won't broadcast remote ID using that same standard battery. I don't have the M4P to test my M3P batteries in. I guess you could always try to get a hold of DJI support. They should be able to tell you if it does or doesn't. Thanks for the comment. Be safe.

Not a good thing with the crash 🤕and good you had the Care Refresh😅. After reading your comment, I checked my M3P with the std battery using the Air Sentinel app and it picked the drone up almost right away. I also checked it with the Plus battery, and it work there as well. Hopefully there was something wrong with the drone and all your issues will be gone with the new or replacement drone 🤞! Take care and be safe.

This is happening anyway and just recently. All I did was update the app. Same thing happened but I grabbed my drone before it could take off. Mine is the mini 2. It has nothing to do with remote ID. It’s something dji did.

@@terryshrives8322 These issues should definitely be reported to DJI. That's not cool if that's going on. If it's only certain drones, that makes it even worse. Thanks for the comment. Be safe out there.

I have heard the it matters what kind of phone you use. Can not speak to personal experience but heard that Drone Scan etc don't work either at all or well, depending on who you listen to on iPhones, but do with Android phones.

I believe that's correct. I heard the same thing but I haven't verified any of it as I don't have an apple phone just Android.

It is the App update and not a firmware update, correct? If that is the case, I don't know what to tell you. You may have to get in touch with DJI support. I know this is not helping but, if someone out there can help please chime in!

@@dk4drones yeah think I'm going to send it all back for DJI to sort out. It's been nothing but problems since day one. I took some nice shots when I was on hols but when I try downloading them it says downloaded to mobile device but can't find most of them 🤷 sooo confused with it all now lol

@@twitch5393 I think that's what I would do as well. It is never fun to have issues right out of the gate. Good luck! Be safe

The only thing I found that is different is the P back to the N mode. I found out that if I boot up the controller first and then the drone the controller boots up a lot faster. I did not try to boot up the controller with the new update and the drone on first to check out how fast or slow it boot up 🤒, I will have to try that. The darn train Haha!!! Thanks for the comment Kevin, Be Safe and God bless.

Honestly, I didn't notice it at first either, but I used to fly the Air 2 that had the P mode when it first came out. Some people were getting pretty excited about that P mode thing, and I don't know why it flew the same with the letter P. Anyway, it is fitted now! 😄 Thanks for the comment. Be safe

@@dk4drones thanks. You as well.

Agree with all you mentioned and that is correct as far as I know. Thanks for the comment and be safe.

I'm trying to remember how I knew I was getting the update as the download box just appeared on the screen. I believe I just turned on my controller and had it connected to my Wi-Fi and it said there was an update. Then I proceeded with the download. Once it was downloaded I had to restart the controller and then it updated the app. You can also go under your profile and check for updates and that should trigger the update as well. I don't know if the drone has to be on or not but it wouldn't hurt to have it on when you try this. Try that to see if that works. I hope this was helpful and that you get the update to install. Thanks Ken for the comment and concern, we are hoping and praying for a good outcome. As always, be safe, fly safe, and have a great day!

@@dk4drones After doing some research as to why I couldn’t get any update notification or manual update for 1.13.4 I found a DJI statement about making sure the battery had more than a 50% charge. I was currently using a battery with 42% charge left from earlier flights. I put in a fully charged battery and didn’t get any update notifications but I was then able to access a manual update on what what I will call a “white settings screen” on my RC2 controller under profile noticing a red dot on a bell 🔔 shaped notification icon. After the update my RC2 controller displays N on the screen when normal mode is selected. I haven’t yet confirmed a quicker controller boot time but I will pay attention to that when I fly again.

@@kenramsey2304 I just checked and it definitely is faster now. I turned the drone on first and then the controller and it took about 20 seconds for the controller to boot up. 👍 I know before this update I would turn the controller on first and then the drone and The controller would boot up pretty quick that way. But this 1.13.4 app update apparently fixed this issue so we should be good. Just thought I'd let you know. Be safe!

The Mini 3 Pro is a nice drone. I have had mine for about 2 years now with no issues whatsoever. Enjoy and be safe!

Thanks for the comment. 1k subs would be nice 👍. Be safe.

Thanks for the comment 👍

You're welcome! Thanks for the comment. Be safe

I do try to keep them short but I've been known to be long-winded too haha. Thanks for the comment.

Yes, when you're setting up your waypoints you can have the camera set as manual. Then you can control your camera at that waypoint manually or you can apply it to all waypoints. Hope that helps. I may do a little short video on all the ins and outs of the waypoints 😊. Thanks for the comment.

@@dk4drones sweet!! I figured there must be some way but haven't played with waypoints enough to find it yet. Sounds like a good excuse to go fly more 😁

Found the setting! Now to test. Now I wish there was a way to do Spotlight mode based on GPS location of remote instead of vision based tracking. I find it loses tracking when trying to use it on myself in a small boat.

Thanks for the comment! Be safe.

I agree with you on having a larger map as that would definitely help. I had the same issue trying to do it at home. It's almost impossible to get one waypoint on top of the other. You can do it but it takes some patience and finagling. Thanks for the comment. Be safe

Has anyone tried to edit double dots on a 10" tablet screen?

Good question, if anybody out there's got the RCN1 controller that would be who to check with. Thanks for the question and commenting. Be safe.

Yes that's the only way I could really make it work was on site. I did try it at home and it was almost impossible to do. Thanks for the comment. Be safe.

Usually it's best to do it before but you can do it after as well.

I guess I've never tried that, but I know you can set the waypoints to start at any point in the waypoint I believe. I'll have to try that myself. That sounds like an interesting exercise. Thanks for the comment. Be safe

@@dk4drones this is not exactly an exercise..... it came out from my mind regarding a lighthouse.... I want to get above the sea about one mile, higher than the lighthouse beam, and then fly in a straightline until very near the lighthouse at the height of the beam.... I do not want to make any corrections and it has to be a straight line from the beginning... I also do not want to stay above the sea for too long.... Using waypoints I would have to do it twice: once to set the waypoints (1, the nearest to the lighthouse and 2 above the sea 1 mile). and then start, and that's what I don't want to do. Any ideas?

@Moroder_Drone I'm sorry, I don't think I can help you with this one. Here in the states and I'm thinking pretty much everywhere 400 ft is the highest you can fly. So the mile high flight would make this exercise impossible. Be safe don't have an answer for either. Thanks for the comment. Be safe.

@@dk4drones It does not matter much the distance.... With 400 feet you could find the same problem..

Thanks for the Sub. Just an FYI, I have a video coming out here shortly on how to stack waypoints. It seems waypoints are quite a nice feature for a lot of things when it comes to drones.

Thank you for the comment and for the sub. Much appreciated. Be safe and have a great day!

Yeah I did notice that the boot up time is slower and the P mode and N mode thing 🤔. I haven't experienced any camera or poor connection issues. Question, have you tried reinstalling the update? If not, maybe give that a try. I have heard that they are supposed to be coming out with a new app update for the RC2 when, who knows. Hopefully that will fix these issues some people are having since this update. Thanks for the comment. Keep your fingers crossed🤞 and be safe.

@@dk4drones I haven't tried reinstalling but will definitely give that a go! Thank you! Kinda brought the drone for when I visit Japan and that's next week so hoping it will be ok by then 😳

@@twitch5393 Good luck and have a great trip.

I don't know but I am thinking that is possible. The next time I am out I will have to try this scenario. Thanks for the comment. Be Safe.

Thank you. I'm looking forward to the result.

You're welcome 😊

Thanks for the comment. Be safe

Thanks for the comment. Be safe