Видео

You are very welcome - thanks for watching and your comment! Glad you got it fixed and God bless y’all as well! - DIYNate

You are absolutely welcome! Thanks so much for your comment! - DIYNate

Haha! Love that hope is alive on the trashcan fix potential! Thanks for your comment and best of luck! - DIYNate

@@DIYNateupdate - it worked great!

Very welcome - thanks for letting me know! Take care, DIYNate

I had no idea there was a latch thing right above the suction cup. There was no mention of that in the user manual at all.

I tried the latch thing and that did absolutely nothing. Still no stick or suction at all. Am I doing this wrong?

Hi there - so if it stuck on the window but not on the dash, it is possible your dash may have some raised texture that causes a suction cup to not hold on. You could apply a sticky pas to the dashboard and then put the suction cup on that flat surface and it should hold. Some slight bumps on the dashboard can cause it not to adhere. You could try the suction cup on other surfaces as well to determine if the issue is the dashboard or the suction cup. Good luck! - DIYNate

Sounds like a good plan! Hope it works well for you and thanks for your comment! - DIYNate

Well that is certainly high praise - really appreciate that positive compliment! Thanks for watching and for the kudos! - DIYNate

Love hearing it helped you out! Thanks for letting me know and commenting! Best, DIYNate

Hey Alexandra - I am going to shamelessly plug two of my other videos for you here. The scenario you mention I ended up dealing with a water valve replacement but your situation could be different. Here are some troubleshooting steps: Maytag - Whirlpool Icemaker Troubleshooting Process (Full Version)! Model MFI2665XEM - by DIYNate ruclips.net/video/K-yxWpvrwV8/видео.html And here is the water valve replacement: Refrigerator Ice Maker Fix - Water Inlet Valve Replacement (Maytag /Whirlpool)! - by DIYNate ruclips.net/video/NzKTzEbk8oY/видео.html Good luck and hope you get it solved! - DIYNate

Good luck and hope you get it worked out! Nothing like an icemaker problem to have to deal with - haha! Take care, DIYNate

Hi there - Not sure about your particular model, but on my Maytag French door side by side, the ice maker can be turned off by holding temp and fast cool (two middle buttons) for three seconds. Then, to turn back on, hold those two buttons again for 3 seconds. Not a true reset but sometimes something like that to retrigger the action on the ice maker may help. Kind of like unplugging your fridge then plugging back in. Likely not a true fix but may unstick something if the system needs a bit of a change. Good luck and hope this helps! - DIYNate

Hmmm - tough one there. So you are getting your blade stuck on a regular basis, right? Not just your drain filling up? If drain filling up, I would try the plunger or disconnect the PVC hookups and make sure the pipes downstream are clean. If the blade is getting stuck on a regular basis, it could be what is getting put down there or possible may have warped from getting jammed / caught on stuff, but seems like it wouldn’t run in that case. My guess is the part that spins the blade may have gotten bent or there may still be something trapped up under there that frees up but not all the way, then gets ‘re-stuck’ after a few days of use. Good luck - sounds like you may be getting close to replacement or take apart zone but haven’t gone that far from my end. Hope this helps! - DIYNate

Love that idea - the rough surface dashboard certainly creates challenges for these sticky surface pads, but using something like duct tape or another adhesive to create a flat surface for the phone mount to adhere to makes a ton of sense. Great suggestion and awesome add to the comments! Best, DIYNate

For sure - I have a video in the pipeline (pun intended) to show the disconnect process with a bathroom sink (P-trap) - essentially the same concept with unscrewing the PVC nut, making sure the rubber/plastic gasket is in place, clearing out the PVC, then re-securing and making sure there are no drips. Love the feedback and suggestion for future comment to help viewers out! Appreciate your comment and stay tuned! - DIYNate

Haha! I do understand that - now you will have a kitchen plunger :). Good luck with the fix and thanks for your comment! Take care! - DIYNate

@DIYNate I ended up having to take it apart but I do appreciate the different steps to try first. Thanks!

@MarySmith-ry9cu - rats - hate to hear you had to go all the way to taking it apart but sounds like you got it fixed. Thanks for letting me know! Take care

You are very welcome! Thanks for letting me know it worked for you! Best, DIYNate

Excellent - very good to hear! Thanks for letting me know and leaving a comment (it helps my channel performance and keeps me motivated that it is helping folks!). Take care, DIYNate

It absolutely can! I probably should have figured this out way sooner but here is the video on how to lay down the middle seats. Wasn’t super intuitive for me to begin with but once I saw how to do it, I was a little embarrassed it took me that long to figure it out - haha! Enjoy! ruclips.net/video/7HZGO5cBbME/видео.htmlsi=ba3LxEPr614PxyYz

Great to hear - happy to hear it saved some money and paper plates! Basically, some stuff gets clogged in the drain pipe and the pressure from the plunger unsticks the jam and pushes it further down and separates so it can get through to the sewer. Hope that helps and thanks for your comment! - DIYNate

You are very welcome, Laura! I appreciate you sharing how this helps and love RUclips for the ability to find answers to problems that are outside of my knowledge or comfort zone to your point. Thanks very much for the comment and for watching! - DIYNate

Woo hoo! Great job keeping your trashcan out of the trash - haha! Appreciate the comment! - DIYNate

Hey there - That is more or less the concept - I like the way you described it - a blender to the sewer. Helps people dispose of biodegradable waste that is common with cooking without stinking up their trash or filling up landfills. Hope you enjoyed the video and thanks for the comments! Best, DIYNate

@@DIYNate Over here in Switzerland we have green waste for biodegradable stuff. I don't know what they do with that, but I assume either compost or biogas. I did enjoy the video.

Very cool - thanks for letting me know you are in Switzerland - visited there once when I was in high school and it was a great trip / beautiful country! Appreciate the comment and thanks for watching! Best wishes, DIYNate

Sorry about not zooming in or giving a better picture of where to drill the holes. It kind of depends where the plastic broke and really, you probably can’t go wrong with where you put the holes and zip ties as long as you think about it from a hinge function or support. Good luck and will try and do better in explaining and showing in future videos. Thanks for your comment - it is appreciated! Best, DIYNate

Absolutely - I don’t think too many folks have seen this video but it is one of my favorite DIY crafts. I use my poor man’s toolbox all the time and love the various additions I have customized on it. Thanks for watching and for your comment! - DIYNate

Yes - that would certainly help get the melting started and going! Thanks for adding the thought for other people to check out in the comments! Best, DIYNate

Very welcome - thanks for the comment! - DIYNate

Awesome - you are very welcome! Thanks very much for commenting and letting me know it was helpful! I figured there are a lot of people with this situation who aren’t exactly sure what to do so glad to know it was useful! Best, DIYNate

@@DIYNate Absolutely! Also, I'd like to give an update. I followed the steps in your video and it worked perfectly fine for me without any problems! You the real one, hope you get more subscribers!

Awesome - love hearing it worked for you, and thanks for encouraging me on this RUclips journey! It has been a fun and challenging experience! Best, DIYNate

Hope it worked for you as well, James! Not sure if the newer disposals have another way to release when they are stuck and sometimes the reset button helps as well. Good luck and thanks for the comment! - DIYNate

Haha - I think a lot of forget about the plunger for this type of use! Thanks for letting me know it worked - appreciate you commenting! - DIYNate

Sorry about that - working on the background music and making it a bit better and not annoying. Appreciate the feedback! - DIYNate

Awesome - love hearing the video helped you figure out where to go next! Appreciate you taking the time to comment and let me know. Have a great day and best wishes! - DIYNate

Yea - I have seen some foam behind the ice makers and am sure it depends on make and model. Hopefully the video was helpful! - DIYNate

Hmmm - my guess is depending on your model, the crushing function is happening in the door so probably a controller function - may be a solenoid or some other component. That is a bit outside my wheelhouse but I bet with google and the model number you may get some good ideas. Good luck, Jim! - DIYNate

You are very welcome, Sarah! Glad to hear the video was helpful for you. Really appreciate you commenting and letting me know - it helps my channel out and puts a smile on my face! Best, DIYNate

Usually, the ice maker has an arm that is used to turn off and on the maker. If the arm is in the upper position, then it turns the icemaker off. Down position turns it off. This Maytag model also has a way to turn off the icemaker or at least the dispenser from the door as well I believe. Hope this helps and thanks for your comment! - DIYNate

Hard to help with the details on that but making sure the ice maker is level is a good start. Sometimes there is a screw that can be turned on the icemaker to increase or decrease the amount of water. If water is leaking on the floor the issue may be deeper than the icemaker - valve, fitting or something else. Good luck on the fix! - DIYNate

@DIYNate I replaced the icemaker also and now everything works.

Yes!!! Love to hear you got it solved - thanks for the update! - DIYNate

Awesome - love hearing the fix for the dryer / lint screen worked for you. Thanks for letting me know and for the feedback! - DIYNate

You are very welcome - great to hear it helped relieved some stress and thank you very much for the friendly comment! - DIYNate

Excellent - plunger for the win! Great to hear it got you taken care of! Thanks for the positive feedback! Best, DIYNate

Hey there - Hope you were able to get it figured out! Sometimes turning one way, then the other works but I am careful saying that as some models may only go one way. Sometimes the reset button (red underneath the housing) may help to unlock it. Good luck! - DIYNate