Видео

The 27ft/lbs is for steel wheels. Polaris wants you to torque to 120ft/lbs for aluminum. Which is what the spacers are. On a side note, I've been running 1" spacers on my 570 for close to 2000 problem free miles.

Good video dude. I enjoyed it.

Looks great. How much does it effect the engine/clutch performance?

Steel wheels or aluminum?

This man deserves so much more subs and likes.

Did you have to reclutch it

I just bought one I'll get it Sunday and I have the side mirrors I just wondered if it looks like

I have these in my cart, but wanted to ask before i buy them. Did they rub at all, and did you see a difference in the clutch as far as power or torque.

Was the valve shim process difficult, I'm having the same issue

I have a 570 with the 2 in lift and have noticed there is rubbing on my front factory tires against the lower front sway bar bolts. Is this normal? It only rubs when turning sharp as possible. To fix it should i use spacers? Remove sway bar? Thanks

How does this effect corning? do you feel like it wants to flip easier? as i ahve 2 in spacers and 2 in lift already installed, but was thinking of a CV Tech Primary before going bigger with tires, the CV Tech was amazing in my sportsman saved me tons of cash on belts.

Are the tires DOT Approved?

When you removed the sway bars , did have to switch back to the factory bolts

Assuming the SunF tires are made in China. How has the performance and ware been on them since you have run them for about a year now?

Good video by the way

Did you have any wheel clearance issues on turns with the 27s? I have the same size stock tires on my 06 Ranger 500. Trying to figure out the possible clearance issue

Gosh I wish I saw this vid earlier

Also bro if you're having a hard time starting while it's cold it's also a problem with the throttle air position sensor!! For the doors you can use clear silicone caulking or liquid!! Okay 👍👍😊🔔🔥🙌 ❤️🤍💙🇺🇲💪

Play subscriber!!You can never go wrong with a 570 RZR lower maintenance than the twin cylinder's everything suspension Wize that fits the 800 RZR will fit the 570 RZR both are interchangeable suspension Wize anyways!! You can also get the Big bore kit for the 570 turn it to a 625 if you ever get bored of it for half the price and more power than the 800 with a good tune the 570 or 625 Big bore kit will be plenty powerful enough especially with a tune kit also a lighter UTV I've seen the 625 outrun Artacat 700 wildcats in racing altered all terrain race tracks on RUclips!! Blowed my mind!! I have a 570 and I would never trade it in for anything bigger!! Seriously just my opinion also for the affordability!!! 100% reliable!! Fun all day everyday of the week and weekend!! 👍👍👍👌

Súper awesome video. I’m trying to choose between 2012 Polaris Razr 570 or Honda Pioneer 500. Honda are absolutely the best but I found a 2012 Polaris rzr 570 for $3000 and the Honda Pioneer 500 is for $7500 . Is those Polaris Rzr a reliable UTV??

Why didn't you hook the front sway bar link back to the shock like you did in the back? Would that correct the length of the link?

I’ve had the same windshield on my 570 for 2 years now. Works great. A few scratches but does the job. 👍

Are they true to size? I’m reading that they are about an inch shorter than what they are listed for

Are you running wheel spacers??

Did these rub with no lift? And do they rub with a lift?

great video!

Just got a 96 xp800 with the 797. Can't wait to get it in the water

what is your trim position?

Good video. I did the same with my '19 RZR 570. I also added 1" HiLifter spacers all around and RT Pro springs. The spacers will help stability. The upgraded springs prevent a lot of body roll.

Carbs sound good!

Yeah mine starts first pull after I ran it before the video started 😁

Seadoo has a recall on the gas tank they WILL honor it get it replaced also replace the rectifier in tank speedo will work BEST SKI EVER ENJOY 👍

Good stuff man! Just picked up a stock 2013 570 rzr and thinking of doing bigger tires and lift like you. Did you feel a loss in power with the 27'' tires?

Nice ski, 👍😊Has the wear ring been replaced?

What brand lift?

If you lift it you need to put wheel spacers on it because it will tip more.

FYI…check the toe-in on the front. My 2012 had original tires…and the were worn terrible inside (feathered). Set your toe….save those new tires.

nice skii . i used to race that back in 96, if you want a free extra 200 rpm or so route away some of the water / coolant going to the exhaust pipe. the coolant line right next to the big round clamps joining it togt=ether. why not jet it down simple, grass will clog a tiny jet but if you route water away you still effectively heat up 2 skrooke pipe and change harmonic thus increasing rpm. enjoy. best i had mine w all the 4 grand worth of mods was 61 mph in florida elevation.

nice video very informative. Thanks!

I know you have not had this installed very long but, any issue yet? I want to lift my 570 as well. Trying to find the right lift and wheel spacer combo. Thanks!

That thing is faster than 50mph. My 96 spx (same x4 hull, 717 so no rave valves) does 54mph with less than 5 gal in the tank.

My 2015 570 came with a 2” lift already installed. I didn’t like it. Way to top heavy and felt like it was always going to fall over. Ended up removing it. Also installed 1.5” wheel spacers. But my son and I do a lot of higher speed ATV trails and like to drift around corners. You may also want to put a clutch kit in to regain your power from installing taller tires.

This was the best PWC of 90s even into the 2000s imo. Had one years ago and sold it and regretted it ever since so I ended hunting high and low and finally getting me another one last year in excellent condition... you got a nice one man. Keep it. Even if the motor goes out completely it is very affordable to have them replaced with rebuilt engines. Yours looks to be in great condition too. Also, you said you were going 47-48 mph. This thing came out of the factory with a top speed of 58

Nice Machine! Great work

Awesome machine! Check the speedometer wheel for your Speedo problem, the wire that’s on them tends to get broken in two

Sweeet! Great condition XP . Can't wait to take my one out for the first time.

Beautiful bike! I have a '72 and I love it as well.

Nice vid. Can't wait to see more!

For $90 bucks you darn near stole it. Haha.

You guys are meant for each other!