- Видео 36
- Просмотров 1 473 554
Garming - Grow it, fix it, build it.
США
Добавлен 14 июн 2015
Growing, fixing or building here on the homestead.
The Perfect Chicken for Your Homestead?
I go over how we narrowed down and concluded this was the best chicken breed and bloodline for our farm and homestead.
Просмотров: 424
Видео
How to Easily Bypass all Lawn Tractor Seat Safety Switches!
Просмотров 5 тыс.5 месяцев назад
This should cover all the steps for nearly all common lawn, garden or yard tractors. Most all of them are made by only 2 companies. Hope it helps.
DIY Repair: Ryobi Electric Pressure Washer Fix!
Просмотров 13 тыс.5 месяцев назад
This is how I fixed a 2300psi 1.2gpm Ryobi electric pressure washer that would turn on but would not build any pressure what so ever. These are the steps I took to fix the unit and get it up and running again.
Unleashing Cheap Fun: Coleman B200RSV Minibike Review!
Просмотров 3,2 тыс.5 месяцев назад
Here's my thoughts and review on a the new full suspension Coleman B200cc RSV minibike.
DIY Repair: Get Your Yardbird Chicken Plucker Working Again!
Просмотров 6795 месяцев назад
I quickly go over how I fixed our yardbird chicken plucker after it stopped turning on. Hopefully this can help you solve your issue.
Is the Kubota L3902 Worth It? | Honest Review
Просмотров 6 тыс.5 месяцев назад
These are my thoughts and review on my new Kubota L3902 and why this tractor might be your best choice if you're in the market! John Deere, Mahindra, New Holland, Kioti , Massey or Yanmar didn't earn my money.
How we're doing hay for our small farm! PART 1
Просмотров 1025 месяцев назад
This is part 1 of our small farm / homestead hay experiment. We're going to try and grow, then harvest hay with very limited specialized hay equipment. I'm doing nearly all of this with equipment I already have! Kubota L3902, Kubota BX2380, 3pt disc, 3pt tiller, broadcast spreader, 1000lbs roller and a drag harrow.
Mower deck install - Kubota BX series tractors [BX2380]
Просмотров 5 тыс.Год назад
I install my mower deck on a Kubota BX series tractor. Mine is a BX2380
How to change Front & Rear Differential Oil Yamaha Kodiak 700 [2023]!
Просмотров 9 тыс.Год назад
I change the front and rear differential oils on a 2023 Yamaha Kodiak 700 SE.
Is an ACDelco touch-up paint kit worth it?
Просмотров 29 тыс.Год назад
I test out a new ACDelco touch-up 4 in 1 paint kit. Is it worth it?
How to change Oil & Filter in a [2023] Yamaha Kodiak 700!!
Просмотров 11 тыс.Год назад
How to change the oil and filter in a Yamaha Kodiak 700. This video is probably good for many year models as the engine is basically the same.
Changing 2015-2022 Chevy Colorado oil & filter!
Просмотров 32 тыс.Год назад
I show the steps required and tools needed to change the oil and filter on a 2020 Chevy Colorado. I'll watch my own video every time lol.
Great Mobile Goat or Livestock Barn! [DIY $$ - MOBILE - STRONG]
Просмотров 585Год назад
I show my latest design for a mobile goat or small livestock barn or shelter. This is not permanently attached to the ground and can be moved. It may also get you out of needing to pay taxes on an "out building" as it's not a permanent structure! I spent under $2,000 in materials and similar barns sell for $5-$6k.
Incredibly Easy Duck & Goose Coop [NO POOP - NO MESS]
Просмотров 1,6 тыс.Год назад
My fully mobile, no mess duck and goose coop.
How to install Kubota BX2380 snow blower fast!
Просмотров 16 тыс.Год назад
I install and record a Kubota BX2380 snow blower in just minutes. Specifically a BX2816 snow blower. This video like all my videos will not waste your time!
Awesome chicken tractor design! [EASY - MOBILE - DURABLE]
Просмотров 2,8 тыс.2 года назад
Awesome chicken tractor design! [EASY - MOBILE - DURABLE]
Makita 18V x2 LXT Brushless Chainsaw battle tested and reviewed!
Просмотров 3,4 тыс.2 года назад
Makita 18V x2 LXT Brushless Chainsaw battle tested and reviewed!
Fastest how to change Kubota HST filter BX series 2380
Просмотров 3,4 тыс.2 года назад
Fastest how to change Kubota HST filter BX series 2380
Fastest how to change Kubota BX series 2380 oil and filter! Will not waste your time.
Просмотров 10 тыс.2 года назад
Fastest how to change Kubota BX series 2380 oil and filter! Will not waste your time.
DIY asphalt millings driveway and road any good? Will it hold 75 tons!?
Просмотров 111 тыс.2 года назад
DIY asphalt millings driveway and road any good? Will it hold 75 tons!?
What's the best tractor for mowing acreage? Kubota BX2380 mowing test and review!
Просмотров 14 тыс.3 года назад
What's the best tractor for mowing acreage? Kubota BX2380 mowing test and review!
Makita 18V x2 LXT Brushless Cordless String Trimmer Weed Whacker battle tested and reviewed!
Просмотров 33 тыс.5 лет назад
Makita 18V x2 LXT Brushless Cordless String Trimmer Weed Whacker battle tested and reviewed!
Best way to set post hole blocks or biscuits for pole barns! DIY
Просмотров 12 тыс.5 лет назад
Best way to set post hole blocks or biscuits for pole barns! DIY
Polk Signature Series S55 review, test and head to head!
Просмотров 16 тыс.5 лет назад
Polk Signature Series S55 review, test and head to head!
Best way to aerate and dethatch your lawn!
Просмотров 2,3 тыс.6 лет назад
Best way to aerate and dethatch your lawn!
DEWALT Brushless 20 Volt Max Blower Review! Is it the best?
Просмотров 7 тыс.6 лет назад
DEWALT Brushless 20 Volt Max Blower Review! Is it the best?
DEWALT DCA1820 Battery Adapter REVIEW! Is there better?
Просмотров 9 тыс.6 лет назад
DEWALT DCA1820 Battery Adapter REVIEW! Is there better?
3 in 1 special! Too many tomatoes / Killer chili recipe / Super easy storage!
Просмотров 4,3 тыс.7 лет назад
3 in 1 special! Too many tomatoes / Killer chili recipe / Super easy storage!
How to remove & get rid of ground moles best - guaranteed method!
Просмотров 815 тыс.7 лет назад
How to remove & get rid of ground moles best - guaranteed method!
That was a simple idea from a smart mind. I was about to throw mine away. Thanks for saving me some hard earned money!!
really, you don't think we can bare to see the dead mole.
Same for the BX2350?
I'm sorry, is that what we've become? So sensitive that we have to sensory a dead rodents face? Jesus
some asphalt millings count as toxic waste .
Nice - glad you included torque specs. It's in my owner's manual. But for owner's with used machines it's nice to know.
There is more than ONE safety switch. Your title is quite misleading.
56968 Considine Run
As far as 'hopping' when you get on, I discovered that if I step up with my right foot on the step, then my left foot is on the platform and easier to turn/sit down.
solid idea. i wear size 14 boots. it's a little rough no matter how. thankfully i'm not old enough to have it be a real issue.
Thank u
Does it shake a lot, a lot of vibration? That's the thing i don't like about mini bikes. But since b200rsv has front and rear suspension that might be a game changer.
Leave it to Chevy to put filter in the worst place. Thanks awesome 👌
Our soap dispenser does not work. It worked for a few times, but now does not work. Any ideas what could be causing it? Thank yall
Make sure you are going with a low-pressure nozzle or no nozzle to get the soap dispenser to work. I would keep reusing the clr, til it starts working properly again
Didnt work with my craftsman. I pulled the little prongs out and my mower wouldn't crank.
Have you ever had any issue getting it to start ? New to mini bikes myself & not sure what to check for it would only run with the choke then wouldn’t start at all tried cleaning the carburetor can’t get the housing off
it's like any other small engine. choke on, let it warm a little, maybe a touch of throttle, choke off. could be flooded with all that choke? check spark plug? haven't had that issue with mine. always starts right up with the correct choke process. bummer for you, good luck. i'd imagine these cheap chinese engines could have lemons. return /replace it if it's new and you can't get it to work.
getcha a baseball sticker over it
I have a brand new one with same problem. Could CLR fix it. When I press the trigger there is a one second hard discharge then very weak. What else could it be?
The little white thing on the intake moves easily
are you holding the trigger down for an extended period of time? this would allow for the system to be primed and all the air pushed out. you need good water flow and no air in the system. trying running the hose until the air is out them connect it to the pressure washer and try, could have a lot less issues. sorry if that wasn't your problem.
The thing on the exhaust tip is to cool the exhaust and protect from burns when in regen mode. You'll notice the tractors that don't have Diesel Particulate Filter (<25HP)have a regular exhaust tip.
nice and it reduces staining.
I loaned mine out… big mistake. The air intake cover itself was full of feathers when it was returned, but I didn’t know until I went to use it weeks later. I cleaned it out, the motor will hum, but not turn. Any ideas how I can repair it? The motor cost as much as a new machine. 😢
bummer, hard to say. wonder if it got all wet and rusted together. maybe try hammer tapping any spinning parts that may have rusted. free turn the drum wheel. just guessing here.
I give up !!! Going to sell my home after 23 years because of these little buggers
Where do they lay? 🥚🥚
if you move it around on grass, they always just pick a corner. if you drop in some straw/hay and leave it place for a while they'll all share a nest they make.
Hello, may I know the brands and details of your attached paver and rolling drum. thanks
My cats kill everything except moles.
I like how the culprit's face was shaded out, just like in a murder video -- it is a murder video! But I fully understand they have to pay for their sins.
Your suggestion worked, thank you!!!!!! Who knew CLR could fix it?! So good, thank you again!!
This Ryobi is the biggest piece of GD garbage that i have ever had the displeasure of working with.
Nope Craftman takes the cake for biggest turd
Nice man, thank you
Part of nature and the ecosystem. Has to be a way to redirect, or over grow something .
Just bought one it arrives Sunday 😊
Thanks...for thst info..👍👍
Thank You!!! I have same model -- just tried your recommendation and it works. For others: don't give up... I had to add more CLR to the soap dispenser and continue to run the washer. After about 3 to 5 minutes, it started spitting and eventually back to the strong power wash.
Will try your method again. P.S. I just add it in the water garden hose port (water go in) and seal the other side with balloon, and let it sit overnight, and it did not work.
I turn mine on and it doesn't do anything the power button is on the light is on any idea I bought it last year and I haven't used it
Have you tried test switch/button? When you press the test button, you should hear a click sound.
Mine ended up being a bad plug from the factory. I got a replacement plug from Home Depot and it fixed the issue
Same. Lights up but doesn't do anything. Mine is 3 years old. Used maybe 4 times for residential use.
This worked after I gave the pump a couple of light taps with a small dead blow. Left the CLR in overnight.
what do you mean dead blow? Thanks
@@yuyuzhao96A dead blow hammer. It has a soft face.
I have the same problem on the same model and I worked the same way , but didn’t solve my problem and still has no pressure . Is there any other solution?
pump internals might be bad. other than taking it apart not much. probably just need a new one. most stuff is junk now and disposable sadly.
Where can I find that filter I have the same one but seems the filter is missing
you may be able to buy one from ryobi. if not you can just add a universal one to the hose you're using.
I’m looking at one now for a friend, same symptom Wondering if I should pull the pump and check the springs and check valves I took one apart years ago and vaguely recall small springs and nylon discs/ plungers They may all be oxidized with hard water and siezed up CLR is worth a try along with 60 # h2o # behind it later on
for sure worth a shot.
No its not worth it. Tractor is light and will easily tip over. Too narrow even on flat ground. Accessories are so over-priced. I should have bought a used tractor with loader.
everything is "overpriced" blame the government. almost every tractor is tippy with no counter weights. most tractors are too narrow and people add spacers. used tractors still cost a ton unless they're old and broken with tons of hours.
Thanks for posting.
I have same bike no rear suspension and ur right its a big solid minibike u dont want goin faster than 30... i got mine to 43mph stock engine did a little govenor adjustment and popped off all the throttle restrictions thats fast enough
Do you have a video doing that
@@eightsixtres1793 i can make one no problem surely in my video ull see im doing well over 40mph
@@eightsixtres1793 yes....not hard to accomplish stock out the box did 37mph well mines did and has a cvt.
Doing this tomorrow!!! I hope it works! I already cut off the GFCI plug and it’s blowing breakers when it plugged in.
@lifehappens168 did you find a fix for this issue? Having same problem. Blowing breaker and neither the gfci cord or gfci outlet are set off.
Very easy to strip the threads on the front drain plug. I learned the hard way!
Will try this I have the same issue with the same model
good luck.
What type of fuel does these take
regular 87 gas
Are u kidding me, you can’t film digging up a dead mole. 😳
I swear these fucking auto engineers put shit in the most fucked up places on purpose!
almost like they don't want you working on them lol, gotta get that service $$$$$
The new plug worked for us for one season, then the plucker crapped out again. Tried replacing the capacitor but so far no luck. We have 36 chickens to process next week and probably going to hand-pluck😩
the dreaded hand pluck lol, good luck!
Nice.
What state are you in
Sweet rig. That and the BX should cover most anyone’s needs.
Thanks, my thoughts too, especially with a nice selection for the quick attach. Now if only I had a big ole excavator lol!
Also, I have another question. You showed those larger rounds that you cut, and mentioned that is the biggest you'd want to cut with the saw. Do you think the 14" bar version would perform similarly for that size cut? Thanks!!
Probably, that won't have much impact on the power just size of bar. It's still the same motor and source and both those bars are larger than the cut in question.