Видео

TY for this video! this fixed the problem. Delta had givin me an entire faucet replacement, but then i saw this video and tried it and old one (which was brand new when creaking started) is working perfectly. so i got an extra faucet on hand now too! :)

He mumbles and seems to talk to himself, not to the audience. He is hard to hear and understand. Often times his hand is in front of the camera and the viewer can't see what he is doing.

You saved me. I had trouble remembering how to put it all back. Big puzzle. Thank you

Nice fix, I would use food grade grease. By the way, if you take time to call Delta, they will ship you the part for free... (depending on your model) RP50587 Valve Assembly RP51503 Bonnet & V-Ring

Easy Fix: Initially I removed the handle and sprayed Teflon Lube on toggle piece that rotates - didn't work. Next I tried gobbing on a bunch of plumbing Teflon Grease (with a Q-tip) on rotating toggle ball and put handle back on. For a few days it made a little squeak and then it went away. Been 6 weeks and no noise at all anymore.

My brass nut is not moving. I have WD40 and a nice crescent wrench on it. Should I try some heat?

Thank you Jeff. I enjoyed the music, but had trouble hearing what you were saying softly while you were working. All the best.

Thanks!

I too have been sent a replacement under warranty for no cost.

the video would have been much better if your hand wasn't always in the way of view,,, position camera on other side

Replaced my cartridge , put it back together and now I have water and no pressure out of my hot side. What did I do wrong

Thank you!

Your hand is blocking the video too often.

Thanks everything went fine. I got my parts upside down but finally got it to work. I lubbed both sides of white part. Relieved it's fixed.👍

great video and nice work! you can contact me replacementcartridgedelta#​gmail.com if you have a question about the supply of this cartridge Rp46074/Rp19804/Rp50587 ​ruclips.net/video/3Xn3F16MFU8/видео.html​

Thank you very much. Worked great. May the force be with you.

Thank you! Worked like a charm! I used 90% pure silicone grease that I got at the hardware store.

This worked great! Thank you!!!

Great job explaining it with great video and instructions thats well paced and explained.

My cartridge got creaky and leaky just a few months after installing a new Delta Kessler faucet. I guess mine was factory assembled on a Friday afternoon by the village idiot....anyway the replacement "Delta" brand replacement cartridges are $33 at Lowe's, however I found a generic one that "Danco" makes for $23 (also sold at Lowe's). It fit and worked like a charm! Thanks for your post.

I had this issue after replacing the cartridge. The instructions in this video so far have worked out great. Thanks for taking the time to make the video.

Your hand is in the way and the music is unnecessary!

My delta faucet has the metal ring very jammed and I see that how easily you were able to unscrew it with your bare hands without any tool...what if I am not able to do that? I am afraid of using too much force to mess it up. And wrench doesnt even fit on it because there is no grip. Is there anyway I could replace the spring and rubber thing without unscrewing the round metal thing?

Same problem...Delta sent me an entire new faucet...payed the plumber to install it and now 4 months later...this NEW ONE is having worse problems. Started sounding "creaky" like in the video and now doesn't even shut off... I had to turn off the valves under the sink....Not Happy!

Thanks so much! This video saved me from ordering a $52 replacement cartriage!

Good job Jeff. Took my cartridge out, completely disassembled it, cleaned & lubricated (silicone grease) the parts and reinstalled it. Have to pay CLOSE attention to the alignment of all the parts. I lubed all gaskets.

If your faucet "squeaks" after replacing or cleaning your cartridge be sure you did not over tighten the brass nut that holds the cartridge in place. Also have some silicone grease on hand to add a small amount to the "D" pivot hole in case you clean it too well. I also used some silicone spray on the pivot ball after cartridge assembly and before handle installation to make the lever action smooth as silk.

I have this faucet too. What does the little orange "toggle switch" on the top of the cartridge do?

Delta has a lifetime warranty on their faucets. I was experiencing a similar problem. I contacted Delta customer service and they sent me new internal parts absolutely free.

ruclips.net/video/KHKFy0J75Mo/видео.html

Had the same squeaky problem with our kitchen faucet. Bought some silicon lube at HD and it's working like a charm now. Thanks for your video!

Just use spray silicone lube. That way you don't have to take apart the cartridge. Much easier and quicker.

Jeff, the insert directions with the cartridge MENTIONS with a NOTICE: "DO NOT ATTEMPT TO DISASSEMBLE CARTRIDGE"😧😤😲 What section of the directions did you NOT READ?? Thus you sound like your messing with the cartridge only opened you up to other potential problems! It never mentions lubricating the ball or the flat plate in the cartridge!!

Why the Porno music?

i changed the cartridge now the water wont shut off??

What is the exact model number for that faucet. I would like to order/shop for a new cartridge for that exact faucet. Thanks!

Delta has great service. Lifetime warranty on parts. New cartridge on the way. No hassle.

thx so much. i have the exact same one!!!! awesomeeee

It worked!!! Thank you so much! Because of your video, a housewife was able to fix her squeaky faucet! Thank you!!!

Was the porn music necessary as you "lubed that baby up"?

thank you so much for showing me this, what is the name of the lubrication

If you're the original owner, just call Delta. Their service and life warranty is great and hassle free.

I just got a new cartridge from Delta, and within a few weeks it began creaking just like the old one. Worse actually.

Jeff, I apologize if my comment sounded like a criticism. It was not intended to be critical. I was merely interested in whether the fix worked for a reasonable amount of time. True that the ultimate fix is to replace the cartridge, but it's nice to know that someone with a little initiative took the time to examine the cartridge and figure out an alternative. We have been testing Delta faucets for 15 years and no one here ever thought to take a sticky cartridge apart with the idea of fixing it. We just replace. So, good job. Delta Faucets is our panel's selection for best value for 2017 in a mid-priced faucet made in North America. If you are interested, you can read the report at starcraftcustombuilders.com/PDF/2017BestValueFaucets.pdf. Jim Edgar Managing Editor StarCraft Reviews starcraftcustombuilders.com/sources.faucets2.htm

I am would be surprised that lubricating the ceramic discs in the faucet is a permanent fix. The discs are not intended to be lubricated, and the lubricant will rub off from the scouring action of the water eventually. Is this fix still working?

Thank you, Jeff.

Thanks, Jeff. Skipped to your ultimate fix and contacted Delta today. Very pleasant and efficient customer service person will be shipping out cartridge. Rep acknowledged it is common problem and did not ask for proof of purchase at this time, though she said to hang on to receipt. Your video helpful for removal/install procedure.

Thank you for demonstrating the assembly. Following the note above, I saved the manual information from the faucet install and found Delta guarantees home parts as long as original purchaser resides in home, 5 yrs for commercial. Called and had a new cartridge shipped with no problem.

wHERE DOES IT SHOW DISASSEMBLY FOR THAT

I cannot believe that having asked MANY times how to fix the magnetic end on my Delta Touch 2 Pillar Pulldown faucet/kitchen/ why it takes me everywhere but to that simple ANSWER!!!!!!