Видео

This helped me replace my cable eight years later. Thank you

Super car

No se engrasan los cables con el tiempo eso endurece

Kissing a child on his lips? 😳

The Crossfire was the most amazing product to come out of Daimler-Chrysler - it was even available with a Mercedes AMG supercharged engine!

God, I remember this and the Crossover commercial!... I'd get goosebumps when the music would kick in.

Just done mine with help from your video thanks so much guys the G clamp helps so much 😂

This was a great video. The repair manual doesn’t say to use a clamp to hold the clutch lever up, and I couldn’t get enough slack to connect the other end to the hand lever. Watched this, got a clamp, and voilà!!! Thank you. My motorcycle would still be sitting in the parking lot of the shopping mall if you hadn’t made this video!! IOU

You should remove the clutch cable from the clutch lever at the handlebars before you remove it from the arm going into the clutch itself. You only needed the clamp because you did not give yourself the slack needed from the other end.

Dont use wd40 for that its not the right stuff for that job

anyone know if this is the same for an 06?

Great car

Saw in other vids..not to use wd40

I can't get it out of the handle for 2 yrs now.

Who would think in 2021 all cars would look like the unsuccessful Pacifica from 2003🤨

MY EAR

Going to be doing this on my 2008 maybe tmrw thanks for the vid

I never saw these commercials in 2011but I'm watching now on my phone aus2021

I had something similar happen to me on the Xbox. I was driving the Mercedes CLK GTR and instantly flew up entering a shortcut and almost did a full 360 before landing and getting stuck for a moment.

This is five years old but very relevant. Even better is a girl working/helping work on a bike is a true rarity and turn on.

Моя первая семейная тачка, много с связано с этой машиной.

NO ONE CAN BLOW A HEAD GASKET THE WAY THAT YOU DO

Thank You Thank You Thank You!!! What an informative video. You just save me a trip to the shop and money.

0:21 xd

Cool vid

How did you get the cable like that? Miles? Slipping? Or some factory issues? Thanx! Ride safe.

0:04 That's probably how fast she'd really drive, on the highway or city. 😅 She fucka hyper.

I love chrysler

The world wasn't ready for Chrysler Pacifica

I would make a VIDEO of the things that you did that you should have not done. However, ty for trying to help ppl...

Hey did you pull it through the circular hole, or go underneath it? Having a hard time following that part when putting in a new cable.

Wonderful in depth video. Thank you

No need for clamp if you unset from lever first. The angle in lower clutch adjustment is wrong, you are much over 90 degrees. Check you manual..

the tachometer and speedometer hasn't go full sweep 😕the gas gauge and temp gauge did ok but not the tachometer and speedometer

How long do you do it?

Nice bike..

That's so cool!

0:13

I love Celine #Queen

Main reason I love Chrysler, when I was younger seeing this commercial of my idol Celine Dion I fell in love with this minivan. Still drive my 2002 touring T&C. ❤❤❤

My wife hands are tiny and sore after a long ride using the clutch so I will turn into hydraulic on eBay.com $40 buck kit, haven’t fit it yet, the customs kit cost $700 lol, wish me luck

Good way to save money

Thanks for the vid! I have to replace my cable and this will save me a trip to the shop!

Question! What happens if you don't put oil in the cable???

Thanks for the advice. Clutch cable on my Honda Shadow snapped completely off while going 50 mph in traffic, going to go attempt this now.

Thank you for your instruction. Nice to hear a lady's voice. Diesel is good for lubricating cables. Just soak the cable in diesel.

Celine Dion is Canadian this van was built in Windsor Ontario.

this is another good video,ruclips.net/video/DvSEk0nXYhQ/видео.html do not use WD40 as a lubricant in any application; for this motor oil will work fine.

Am doing the clutch cable on a 07 Ninja 250. Son's bike. Clutch grab point was almost at full release and real tricky in city traffic. Both end adjusters were all the way out. Difficult to shift, especially when cold. Bike itself is the coldest blooded thing I ever encountered. It's an 07, so a lot of that has to do with EPA compliance. Watched the video and it helped a lot. As for disconnecting the lower ferule from the throw-out lever, the C_clamp didn't work for me. Wrong size clamp. Found that if you just cut the lower cable boot, drop the lower nut off the cable end, you can get enough slack to disengage the cable from the throw-out lever. On removal cable showed no fray and was smooth. Must have been stretched out.

Good video. But don't make the clutch release too low or you will be dragging your throw out bearing. Also you need enough bite so the clutch fully disengages between shifts or you can wear out your synchros.