Видео

Weather you want to protect your home or your business emergency exit door alarms are a good idea to not only warn you of danger so you can escape or call for help, but to protect your home or business as well.

​@@getec_GETEC I'm talking about the fire alarm you passed by

Yes There is Simplex 4100U fire alarm system manual full station and hornstroub . Connected to the main system.. it's can activate automatically or manually. And door system is separately installed . There is many reasons.

🙏😊

❤️❤️❤️😘😘

❤️❤️❤️😍😍

Thank you bro.😁

Thank you bro for supporting us...

Thank you sir for supporting us.

Thank you sir Ryian 😊🩵

Thank you 🩵

Riyadh

thx

TROUBLESHOOTING USING SP FAULT CODES SP (Spare Input) Fault Codes are associated with four inputs that are considered spare inputs. Spare fault code programming is contained in OP6-0, Protective Relay Programming (see WP 0085, Table 7 for details). These codes are not stored in the GSC fault log. When a spare input fault is detected, the FAULT SHUTDOWN lamp flashes and the corresponding code (SP1, SP2, etc.) is displayed on the upper GSC display. Fault condition on SP 1 and 4 is programmed to shut down the engine immediately. WARNING Fuels used in the generator set are flammable. When filling the fuel tank, maintain metal-to-metal contact between filler nozzle and fuel tank opening to eliminate static electrical discharge. Failure to comply can result in flames and possible explosion and cause injury or death to personnel and damage to the generator set. Fuels used with the generator set are flammable. Do not smoke or use open flames when performing maintenance. Failure to comply can result in flames and possible explosion and can cause injury or death to personnel and damage to the generator set. NOTE SP1 thru SP4 must be evaluated using dedicated shutdown lights, alarm conditions, and available fault codes.

Hi there.. we don't understand your language sir.. but I guess you have a speaker connection issue.. disconnect all the speakers and reset

Hi brother... For that model manual PDF you can download from Google.. there's you can find about your error and answer..

Hi there.. send me your email address.. I will send full diagrams for this.

What problem sir

Hi there. Fix properly speaker cable. There was short something. And reset

Brother can you comment that your question in English.?

S/D This is not a malfunction. Incorrect settings on your Onkyo receiver can result in no sound. The digital input signal should be set to "Auto." Select the correct digital input source. Unplug headphones from the receiver when you are trying to use your system with the external speakers. Press the "Muting" button on the remote control to unmute your Onkyo receiver. Check the inputs and outputs to ensure they are correctly connected to the receiver. Adjust the volume controls so you can hear sound. The bare wires of the speakers should be in contact with the metal parts of the speaker terminal on the receiver. Check all speaker wire and power cords for shorts. Your Onkyo receiver is not compatible on its own with a turntable that uses an MC cartridge. You must connect an MC head amp or transformer to the Onkyo receiver before the turntable will work. Additionally, Onkyo reported that certain models made between 2009 and 2012 had a defective network chip that contributed to the loss of audio.

I have an integra dtr 20.7 all buttons on front panel doesn't work. Neither does the remote. But it does work with the phone app. That confirms a problem on the main MCU. Turns out to be a factory fault that onkyo acknowledges.

sir can you please comment in English. We don't understand your question.

Hi. Can you please comment in English. We dont understand your language brother 💙

@@getec_GETEC would like to ask if this is also applicable to connect on FDAS panels?

Yes..there is a way. but if simplex FDAS panels only. Adding ULC S771 relay. For other brands we have a no idea bro