Видео

When one does their own and follow what is done we’ll make sure one uses a silicone seal as it will let water into your setup

Thanks for the video, very nice box ,is still working on 120 volt or on 12 volt ? If is on 120 V it used less watts consummation?

Your jeep is bad ***

I have a mountaineer stove and was looking for just this kind of guide. The tube flare was stumping me and when I saw you drill out a the fitting it all became clear. I'm going to try to use the factory recessed mount so that the QC barb is more or less flush with the stove like factory.

THATS Battle Rock. ,covered w poison oak!!!! be carefull! has a great history w th ROGUE INDIANS!!!!

Installed one on my Tundra. Awesome. So awesome our agency wanted me to install one on a surveillance vehicle

That’s what it’s like when addicted to the internet.

Why is the choke not needed?

New to Starlink so not really understanding this concept, how can this work if the dish needs a rotary motor to move the dish to find the satellites ? Does it not need to find its degree angle to fix its self to the satellite ?

if you find this too much work to set-up install it permanent flat mount🧐

Awesome Stan! -Rick (Liberty Auto City)

ruclips.net/video/MDuvTPVMKxI/видео.htmlsi=sEB6d-tk0zWwLcgu

How about a bigger dish for better reception? I would personally use a silicone or liquid rubber sealant all around the edge to ensure a tight closure. Should do a continuous ping, throughput and latency test while driving. By the way, Huawei has satellite phone call on their latest model.

Great video, thanks for teaching us how to do this. I've seen a video where you can just pull apart the front from the back of the dish as it's only glued together, could you possibly use the top without the extra part of the back that's left over when you cut it with the Dremel, or do you need the extra back left on?

Hi jeepNtreetop. Great video! Love it!!!

Hey folk : how can contact them? Are you in USA? I am in Canada. Thank you.

How do you recharge the lithium battery? Can you please share a link to the lithium battery that you used?

How do you recharge the lithium battery? Can you please share a link to the lithium battery that you used?

be careful when ordering starmount products, i ordered 2 mounts and a bunch of accessories on April 2nd and was told it was backordered 4 weeks, I still have not received anything and am trying to get my refund... think twice before ordering

Hello sir, I'm from Indonesia, are used antenna items for sale?

Thanks from Australia for the video! I've got a slight problem though, followed all of these steps but I'm only getting a low pressure flame now. I noticed that the hole in my flare fitting reducer piece is much smaller than the one I drilled out in the flare nut, would this likely be the issue? Should I just drill through the flare fitting with the same drill bit to allow gas to flow through quicker? edit: i think the problem actually lies within the hose and regulator I'm using, its a low pressure regulator so I'll swap it out for a high one like you listed and I feel like that should fix the problem :)

Yes, looks very easy and it is. However, after my modification the router kept dropping out and eventually was unavailable. I managed to remove the dishy and did a hard reset on the router which got my a signal from the router, but now the dishy will not move off from “booting”. I have no idea what to do now as Starlink won’t be interested because I have butchered dishy and Star Mounts don’t seem to interested either. I am seriously thinking about buying another dish and stick with placing it on the roof. The star mount and removable mount shall need to stay on my RV roof as a very expensive ornament. If I could return the lot I would as after 4 days of fault finding and 1 day of use I’m not happy but I live in Scotland so not easy. I would seriously think hard about what your are doing if you select this product and the support or lack of you may get or not as the case may be. If this item was bought local I would be at the door demanding a refund

top the content, you can find the link to the one you used to make it 12v, I wanted to build mine here in Brazil.

What a rip off! Over $3000 for the mount kit displayed in this video. There are other effective ways to do the same thing that cost next to nothing. Keep searching.....

Upadate on the starlink? Any issues since you installed flat mount?TIA

I live there and it’s incredible

Thanks for all the hard work just to save me some time! Nicely done.

Olá tudo bem? Gostaria de saber se essa case tem parafuso de respiro para aliviar pressão dentro e se as starlink estão queimando dentro dessa case por causa da pressão e o calor?

Great video saves power and makes sense.

All you need now is one of those 12v converters and connect GPIO.

Is the waterproof connector to the right of the power for a direct Ethernet cable to the router? Is that a female connector there or something else?

Friendly Caution: The antenna emits 12Ghz radio at 4 Watts on transmit. This is done using phased array beam steering. 1st. the transmission pattern of the antenna has a significant side lobe leakage that emits forward along the plane of the antenna (Into your windscreen). 2nd the antenna steering can be as low as 60 degrees from vertical. Not quite centre of your head but very close. This steering is dynamic as the antenna tracks moving sats. I would not every consider placing a starlink antenna transmission plane (face of dish) in any orientation where it exposes humans regardless of the period of time they maybe exposed. FCC has a prescribed limit of 1.6 watts per kg for humans. The issue with the sat antenna being it is not a cell phone or a cb radio. It is a highly focused beam array that produces significant gain in the direction to which it it transmitting. I would not like to drive in your car for any significant length of time. Sorry to provide negative advice on what looks to be a very fine installation and quality work. Science just gets a little in the way for long term risk. Hope the info starts you on a journey to evaluate that risk for your self. Bet of luck.

Aan de vier pootjes van het frame heb ik 4 magneten gemonteerd (boutjes niet te vast plaatwerk auto is niet vlak) AMAZON ca 12 euro

How is this working today and do you still recommend all the parts?

Hey there, My Starlink went down yesterday and Starlink has refused to replace it because they say that i used a sub standard mount system, it's a gen 2 dish and I've lost communication with it. There's no sound coming from it and it won't stow so i'm thinking it's lost the power source, any thoughts??

This is for Brandon i wonder if you still have those starlink motor that you were given away or tossed them in the garbage i wonder if you can ship couples of them to canada

Stan - I did all of this - installed my 12v all-in one ..... worked great for a day ..... then I parked under a car port - and forgot that the SL was still in "ON". switch position. Now everytiem I plug it in I pop the 10 amp fuse in my fuse panel. Any ideas what to look at ?

How about for the Gen 3 ?

Hello, great video. Thank you! Could you tell me what kind of pipe system you have installed in the Cokpit. The one on which you have attached cell phone, monitor and iPad holders. Would be super nice. Thanks in advance and good luck.

I’m so impressed! Very thorough, very helpful!

is the RV plan the one to use from Starlink?

is this for gen3 or older gen2?

Used the same yaosheng kit. It worked at first but buy 9pm starlink disconnects and it didnt get fixed. Faulty product?

I like the hood mount. I would likely mod a hood scoop and make it look aerodynamic. Great video!

Boa tarde Qual link eu posso acessar para comprar? Gostaria de comprar esse suporte da antena pois aqui no Brasil é um valor muito Alto

Would that suction cup hold on my GPS unit to the windshield and not fall after a few months?

Thank you for the advice sir

can you please share how do you provide power to the starlink modem and antenna? Or recommend me something simple for my Honda Pilot 2016 … just need to power the starlink and charge 4 different phones at the same time

Hi there what are the cost i need one i am in south africa thanks

Does anyone know if it's OK to flat mount dishy in UK, would it effect signal? I'm new to this, so sorry if a silly question, but my dishy is quite tilted in normal running position. I guess I could try it flat between 2 supports and let the pole dangle to see. I really like this solution.