Видео

Hello Sir, I am using the DE10-Lite board and would like to know how to load a program into the flash memory so that it persists even after the board is powered off.

module mux( input wire a, b, c, d, // 4-bit input as individual wires output wire [6:0] s // 7-segment display output (active low) ); reg [6:0] segments; // Internal register to hold segment states // Continuous assignment to connect segments to output s assign s = segments; // Always block to evaluate on changes to inputs a, b, c, or d always @(a, b, c, d) begin // Case statement to determine segments based on binary input case ({a, b, c, d}) 4'b0000: segments = 7'b1000000; // 0 4'b0001: segments = 7'b1111001; // 1 4'b0010: segments = 7'b0100100; // 2 4'b0011: segments = 7'b0110000; // 3 4'b0100: segments = 7'b0011001; // 4 4'b0101: segments = 7'b0010010; // 5 4'b0110: segments = 7'b0000010; // 6 4'b0111: segments = 7'b1111000; // 7 4'b1000: segments = 7'b0000000; // 8 4'b1001: segments = 7'b0010000; // 9 4'b1010: segments = 7'b0001000; // A (10) 4'b1011: segments = 7'b0000011; // b (11) 4'b1100: segments = 7'b1000110; // C (12) 4'b1101: segments = 7'b0100001; // d (13) 4'b1110: segments = 7'b0000110; // E (14) 4'b1111: segments = 7'b0001110; // F (15) default: segments = 7'b1111111; // Blank (all segments off) endcase end endmodule

How much for you to do that for ya boy.

my mother was good friends with Lucie Aylwin still such a sad stor yt othis day. unfortunatly she has passed at the responsibility of iressponsible engineers and owners.

Thanks for this, man! Appreciate you!

Dat Upgrade! 👏🏻👏🏻👏🏻👏🏻👏🏻 These headphones should come like this from the factory.

thầy ơi, thầy là người Việt hửm thầy.

Are the individual segments replaceable? The top part of one of mines went out

lol have a big lab practical tomorrow and this is a god tier video tbh

I want to do the same thing to my HD280 Pros. It looks like the jack you linkd to is no longer available. Any recommendations for a replacement?

The MAYOR, and three councillors, had no right to purchase this property from the defendant ,property owner of Algo mall,while in a "class action process", which then years later, is still waiting to be heard !! The property should of had a "lien", against it ,as a claim !! What incompetence from a municipal office official, and his three puppets !!

Hey gonna try this soon. When You say you shorted the ground cables do you mean you cut both in half and spliced them together to make one cable? Or what exactly?

what's your multimeter ?

nice, so basically u can turn this one into bluetooth also? with external bluetooth receiver..

Great video, thank you for sharing, it helped my class, our experiment was to use the 7-segment display to display the result of a 4 bits sum

I was about to spend around $50 with for a replacement cable because i broke the original cable, i tried to fix the jack itself but i kept having problems Your video helped me so much i really appreciate it. I spent $8 for 10 jack ports and $16 for a 3ft and a 6.5ft cables $24 for waaaay more value I already have a lot of experience with soldering so it was easy to fix Thank you again, truly

Hey man, can you share the source code for it ?

Use wheel encoders! And correct the PWM to the motor(s) using a PID algorithm to compensate for the drift. As you will never find DC motors that run at exactly the same speed or have exactly the same grip or sized wheels/tires. Drift is therefore a given.

Hey! do you mind linking the source code? I want to try this myself!

hey Kiet! Great video, I plan on using it to do the same mod to my pair as well Did you just sorta stuff the soldered wire into the headphones with the pcb when putting it all back together? And did you keep the electrical tape on when you put everything back in?

Looks great.

that is briliiant could you share the code please

That's actually really cool

I was mowing a yard and accidentally ripped the whole coiled cord out!! Luckily the four wires just came straight off that pin plug.. Now that I know which wire is which, I kind of want to do this very same plug! Thanks for the 💡!! 😁✌️🎧

noice

vba3z vum.fyi

How much you charge for do like this on my Sannheisi??? Kk

replace the earpads also they are utterly trash and are the culprit for the dark sound replace it with a velour and strangely it sounds open back even tho I've used a lot of headphone with velour and this doesn't happen specially calibrate it here are some settings for equalizer apo on windows Preamp: -5.6 dB Filter: ON PK Fc 20 Hz Gain 5.5 dB Q 1.2 Filter: ON PK Fc 50 Hz Gain -1.7 dB Q 0.5 Filter: ON PK Fc 130 Hz Gain 6.5 dB Q 2.5 Filter: ON PK Fc 1050 Hz Gain -2.3 dB Q 1.5 Filter: ON PK Fc 3300 Hz Gain 5.4 dB Q 2.7 Filter: ON PK Fc 3500 Hz Gain 2 dB Q 1 Filter: ON PK Fc 5100 Hz Gain 6 dB Q 3 Filter: ON PK Fc 7300 Hz Gain -3.5 dB Q 2.1 Filter: ON PK Fc 8500 Hz Gain 1.5 dB Q 2.3 Filter: ON PK Fc 15000 Hz Gain 4 dB Q 1.7

Can you help me out real quick? There's a 5 page report associated with this assignment, can you email me at faraz.mahmood1999@gmail.com , I just have some questions I'd like to ask you. Thanks!

Hello Kiet, I'm doing the exact same project as this I need some assistance.

Please look at Description for Details.