Видео

With some inflatable beach wheels, this would be absolutely amazing!!!!

Does it come with hitch and cotter pin?

What thickness is your starboard ?

Jeff will it work on the Hobie lynx h rail ?

Well. Looks like I’m selling my blackstone

Enjoying your videos - both fishing and rigging! One question: What is this 180lb limitation I read about regarding the Groovy Boonedox Gear? I have no plans to rely on my Native Slayer Propel tracks - I will remove the built-in rod holders behind the seat and include HDPE mounting plates inside the hull. I'm thinking that with the shared weight of me holding the bow of the cart the 180lb limit is okay. What do you think?

Can you use this with 2 kayaks?

It needs more support, like 2 vertical jacks to support the back horizontal bar. That think was shaking to much for me.

This video was super helpful. #1 I also used the wrong size lock washer. #2 using the paracord to get the backing plate into place might have saved my marriage (just kidding - maybe). Appreciate the content.

Hi mate I've got a pa14 with boon dox too but I put mine threw the rear scupper plugs as all the support is really under the yak im in Sydney Australia

Make sure to add the stock foam gasket. i almost sank my Titan 12 on its maiden voyage after watching this install😂. Took in over 3.5in of water in my hull.

Will this work on the old town autopilot 120 with the rear tracks?

You let trash fly away on the beach youtube shall eat you alive. Mark my words

Now try that taking those wheels into the sand with full cooler

At the height selected, What is the distance between the tailgate and the T-Bone outriggers?

Friggen copy cats That is all BOONEdox does is copy others ideas. Another one of my stolen ideas from Boondox

I'm liking mine so far.

At 1:10 bro what’s that pin called? My PA is missing it and my rudder will not move. My steering handles move the drum but without that pin it does nothing. I’m so frustrated.

💪 Promo_SM

Just checked out the Boondox Slotted Console on your website. Does it come with the risers for mounting or is it just the bar?

This is not what an install video should be. It should be short, concise and in a format that someone can follow along with.

At to 20 minute mark you were struggling with the j hook. Would it be possible to use the Toyota bed cleat or something similar to install that j hook?

I've got an Old Town autopilot 120, she weighs about 160 empty. Would this thing be able to handle that, in your opinion?

no gasket?

now you can tell peaple how your set up CRACKS KAYAKS .

Just ordered one. It didn’t come with those upgraded side posts. They’re also not on the website as an accessory.

What are the 2 small metal clips used for? Directions are unclear. Thanks

I have a 2020 hobie revo and been trying to get someone at Boonedox to answer me on where I should install. Behind the seat seems curved and the backing plate won't sit flush so maybe further back? I'm trying to find a picture or a video on someone installing it on a revo 11 before I drill there. Can someone please answer me? I've tried every form of communication for almost a week and can't get anyone to talk to me.

What size is that teflon washer?

Please make this gear available to work with hobie lynx hrail tracks. Pleaseeeeeee

What about the hobie lynx? Any options for this landing gear? We really need it. We have metal hrails with tracks

구매원합니다 어디서 산것이며 얼마인지?

good morning MrBear from florida. i have a bonafide ss127 i purchesd the landing gear three years a go for my kayak, my problem is i put it on the ss127 were bonafide and Boondox tell you to put it on the kayak backer plates and all.Both port and starboard sides cracked 7 times i had to heat welld them back together.i contackted Boondox & Bonafide about this problem sevarel times and got no respons , not a way to run comp. so use at your own risk and dont look for help .

Excellent review. Some suggestions I have for the redesign… Should have a 1 1/2 hitch option. Multiple slits cut around the edges strapping things down. Maybe have the option to mount it to the tongue of a trailer.

I've towed around a 12' 6" kayak in my F150 6' bed for years and thousands of miles with only 2 straps through the scupper holes not ratchet straps either, just a pair of friction buckle type and never had any issues at all. Chad Hoover will show you: ruclips.net/video/aFz9VW4o7go/видео.htmlsi=6fP7GXAEyoMDGzMn

Hmmmm a strap at the front of yak would keep it from moving around.

Good video. Where could I find the 24" weather pads?

Hey Jody Great comeback at Lake Murray. Does Boomedox make one for an Old Town 106MK?

I wonder if magnets would help with the installation...

I would like to know the installation weight as well? Are there other wheels options? And how is the solid wheel in deep sand? THX

Glad to see the videos coming again. I enjoy your channel. Put one on my boat last year.

The boondox landing gear looks nice. How much extra weight does it add? I use Hobie Cart. Load it in out my truck bed. I've been doing that with both my pa12s almost 10 yrs now. I modified my cart. Replaced the top plugs with Hobie thread in black tie down plugs. They fit tight & perfect & I can drop a bungee through my kayak scupler holes, hook the Bungie clips to top of new plugs in the cart. Then I just lift back of my pro angler & bungie pulls cart up into holes perfect every time. Don't need anyone's help & never tip your kayak over again. You do have to get small double side carabineer clips to attach to bungee so they fit through the scupler holes. Home Depot & Lowe's carry them. I leave my kayak rigged at all times I haven't had roll it on its side to load my cart in 8+years. I also built a kayak stand on casters that sits level with my truck bed. So I can pull my kayak into my bed from the stand, or from my bed onto the stand. I only lift my kayak 1 time per trip when I load it back into my truck when I'm leaving. I wouldn't use a trailer if someone gave one to me. I wouldn't be able to go alot of remote areas I do if I had a trailer & if you don't have a trailer at the big lake in my area you don't have to pay to park & fish. If you have a trailer you gotta pay to park!

Any plans for firewalls for other kayaks, or generic firewall?

Thanks for the video Jeff. Just installed the Boonedox rudder that Joe sent me on my 23 Outback. Split ring needle nose plyers worked good on loosening the rope knot. Had a hard time getting the rope back thru the new rudder, finally pushed it thru with a small finishing nail. 😂

First, I love that you guys listen to feedback! As a tinkerer and kayak rigger I appreciate it! There are some options out there for mounting graphs up front that I was looking at, since it was my idea, and I appreciate it, now there is no option but the Boonedox!!!

I’m pretty sure you installed the spring incorrectly. You need to flip it around. You should not have to press fit it upon install. You’ll notice when you pull it out that it will now be over extended. No worries just flip it around that way when you pull up on the retract cord you will have pressure. Look at the underwater part of the video and you will notice that the rudder is not fully in the down position. Also to note that the tracking which is the biggest downside to a stock rudder is greatly improved with this rudder!

Now I really want one. Love it.

Loving the collaboration with a cool group of guys!!!!!!!!!!!!!!!

Saw this on todays video, and went looking for a more detailed video and found this one. You just sold at least one of these, maybe 2, I have to go sit in the Ride and think about layout. Good place for me to mount a Bullwinkle so trees don't pull my rods out of the other rod holders on the creek. Lost 2 rods in flush mounts after the hurricane in 2019, IIRC. Was on Swatara shooting chutes in dams and getting swept under trees. Had to cut a rod leash on one to save myself from going over. Been wanting a Bullwinkle ever since so I could rods more horizontal in the middle instead of sticking up like flagpoles. Couldn't figure out how to do the layout but this looks pretty good.

Soy de Argentina y me interesaría, sabes adonde puedo conseguirla???