Видео

Much appreciated info and great straight forward video 🎉

Just bought one of these. The four holes are air inlet holes, otherwise there would be a vacuum when the exhaust motor is running.

Would have preferred to hear more from the Makertech's founder.. too much interruption from the host. Hopefully there will be another review where that happens :-(

So at 23:35 you increase the layer time for max fan speed threshold, but that isn't used as a minimal layer time unless you also check the "Slow printing down for better layer cooling". Without that checked if just changes the part fan speed based on estimated layer time, but since both min and max fan speed are at 100%, it doesn't have any effect at all.

This helped me massively. I couldn't get the thing to work, even pressing the buttons. But thanks to just a small adjustment (holding it down while I clicked on the download) made it work. You just saved my life.

Worried about mine. Soon as I saw the package weight was 50lbs.. package delivery ppl love to beat the hell out of stuff that isn’t theirs.

Is there any support for these machines ? my wife's boss bought one and it don't work at all ????

I got excited when I found this video. When I saw the results, I was relieved I won't be spending $80 AUD. Barely any difference from stock duct.

Thank you very much!

thanks for the video friend, this really helped me a lot

how to extrude?

Is it that heavy you look like you’re dying by pulling it out

Despite all wonderful and positive reviews on youtube. This printer is fucking shit: the setup is not as easy as claimed by all reviewers: the QR code wich appears in the setup isn’t working. The actual one is hidden in the menu of the display. The AMS setup wasn’t working according to the manual or videos. And from bambulab you can expect absolutely no support. It’s probably just a letterbox company. I can’t even return the printer, because nobody responds. I bought it, because I’m a beginner and wanted an easy start, but the opposite is absolutely the truth. Therefore Istrongly recommend not to buy this printer.

Can someone please link the extended nozzle wiper?

How good is to exhaustout the gasses

WHAT THE F...........

they have switched to a super adhesive lol. I had to break it off using a pick

I wonder how this compares to the Biqu (BTT) Panda Jet?

u got that " tape" oh the sides machine to make less noise? it works?

Great video but to much complaining. You want a good print but you dont want to let the machine do it. Typical PUNK TEENAGER.

I think I have a tiny piece stuck in my in feeder (gray part). My light is solid white and I can't put anything in the entry. Any idea how to unclog it?

I’m sea sick now

Super cool! Definitely going to be modding my elegoo enclosure, the air exhaust on top would be better for the door function but the extra shelf storage is a big plus for us small space makers. Sitting at 6 printers fdm and resin and the phecda I still need to set up. Around 20 drones, pc rig, and workspace for that and resin post processing, space is tight. Love this "wall" idea since i've expanded up my walls as well lol

Did you heat up the Allen key ? Ty

18:10 dude never wiggle by hand that hard your print head!!! Jesus Christ....

Thanks your brother. I've been trying for 1 hour

Thank you for testing - although I would have hoped for an overall comparison (e.g., via a chart) by the end of your video. :)

Thank you. I recently started getting clogs in my extruder when using the holographic plate. Turns out, when changing from the texturized plate to the smooth/high temp plate, the chamber heats more as a result of the higher bed temp and the filament in the extruder softens enough to bend and clog. I refuse to open the doors in my X1C so I wondered if this duct design may have a positive effect on extruder cooling. Although it may actually not as it looks like it introduces a bit more of resistance.

I don't recall Elegoo making any OD claims on the windows, it was brought up numerous times during the campaign and they along with most commentors said wear your glasses at all times when the laser is on. The glasses in the box also have no OD rating or any safety marks so I bought my own Phillips-Safety laser glasses with OD6+ 100-600 and 7+ in the range 455nm range and the lenses are marked up to this effect... expensive though but better that than damage your eyesight imo. Even though the diode laser is in the visible range your blink response isn't quick enough. Glasses are not 100% they just help and the higher the OD in the laser range the better and as you found out those large windows don't do much. Personally I'd have worn my laser safety glasses and used the camera to look for laser shine paths. Like your thinking on your setup but all that window real estate is now pointing outwards so maybe cover a fair bit of it up?.. I also think you need to consider in-bleed air and flow. The standard enclosure has in-bleed eyelets front LHS and fan extraction at rear RHS to get air flow front to back in the enclosure for his reason.

Still waiting for the fast printing settings.

This is the one. I had to push through while turning the gear in the 4-1 feeder part. Small piece was stuck and nothing would feed. Thanks!

thx for review

Pretty bold of the Kokoni team to show up

Just got this one after your vid. Overhangs are important for me without support, so I'm highly expectant. Just with they included the manual in the box instead of a flash drive

wish I saw this video before purchasing this upgrade...too late to refund it now lol

So Sad, the shipping to Germany is 28 Euro 🙄

Thank youuuu!!! Havent gotten into the video yet, but absolutely no ones really documented or covered the 3d printing booth, theres only like two 5 second clips out there!! Cant wait to see whats in store here and hope to see whats going on with the 3dpens at ces this year as well as the sculptures i believe i had seen presented

too bad you didn't go a few years or so ago. 3d printing was massive. probably 25% of that top floor.

I knew about materials but 3d printing wood?!!?!!!????!!

Thank you for finding a Creality spokesperson that can actually explain stuff about the K1C! I've been scouring youtube and twitter for K1C CES coverage and they mostly talk to people that don't know what is actually new about the K1C.

Makera really does look impressive. You should look into air exchange units for your house if tackling air quality.

the printers look so cool damn

So hard to see in portrait

Check out the longer non-phone desktop version here:

I guess you're getting accustomed to your video glasses, as the darted movements can be jarring. There's so much to see! The rectangular pool of water caught my interest!

Hi, just two comments. First, slow the camera motion down a bit. You need to go 2 or 3 times as slow as you think you need. Second, I know RUclips wants these vertical phone view videos, they are horrible to watch. I've already subscribed twice to your channel because content looks good but ubsubscribed when I realized it was very painful to watch.

Thanks for the CES coverage!

Por favor subtitulos en español