Видео

Hey Marcus, thanks for the great video. If the batteries themselves totally died (or one or the other) on the original g4, would that make the unit completely dead as well? My g4 of almost 3 years just died and won't power on at all. Wondering if I can replace the batteries as a possible fix.

Am I the only one noticing water droplets not passing through every IMS screen holes?

Great work! Love the memory for different portifilters too. Do you think a flow meter for volumetric could also work? Could the Pi power and process a flow meter?

Is there any chance at all of you offering a premade/preassembled Apollo for those of us who are less technically adept?

Hey is this the stainless or the black stainless?

Thanks for sharing!

I know this video is a year old but WOW, great video I've come across looking for help getting over my fear of making espresso with my new machine. The step by step explanations along the way, right down to cleaning as you go, are absolutely perfect. I was intimidated by my machine but now am approaching it with confidence. THANK YOU SOOOO MUCH!

oh my god! amazing! but is easaly installed? and is it sold?

So awesome, will be getting mine in a few days. Will have to look into the wiring but I really like what you created.

This is sick. We want the build plans!

How Many cm tall is the 2 boxes?

Great tutorial! Out of curiosity, is there a certain amount of pressure that one applies/pushes into the espresso beans puck before attaching the porta filter to pull the espresso? Like, when you were making sure the grounds were level/tamping it down, did you apply a certain amount of weight? (Or, did you only make it level?)

I would love to buy one. I am wondering and curious and what you were upgrading to?

Awesome video. Just picked up a 2021 e-tron and man I drive the speed limit and still the best I have seen is 2.7 mi/kWh. This is at 55 deg F and basically sea level. And the best charging speed I’ve seen is 127 kW at 39%. So your numbers are shockingly amazing. Hopefully as the weather improves my efficiency will too.

Hi Marcus, Great idea! 👋Great project ;-) ... 👍👍 I am actually working on another ESP project, with some D1 Mini ESP's ... Enough CPU and a single GPIO for this Micra steering should be available on all ESP's ?!.. Wonder about the display ... I looked at ESP boards. There are some with a display integrated. May be you can share the part-list you used for this project ? The intelligence of your Arduino project is in the script ;-) .. I presume no GitHub page where this, or even a beta of it, does exist? Enjoy your cofee .. Looks btw, great and tasty ..

Why would you get the Micra and not the Mini?

Very Impressive! Great job on this. My super anal-retentive mind would want to slightly tweak the button layout and size of device. I would probably line up the 3 buttons to the right and centered inline with the size of screen, reduce the blank space at the top and bottom (shrinking the height by ~ .75 to .5 inches), and move the switch the side on the box. :)

I have this machine and I am thinking to return it. I am a type of person that needs a 24 ounce cup of Joe in the morning and there is no cop that will fit under the spout in this machine. That’s really disappointing.

Thanks for the video, where did you buy this slayer tip?

Please share what you can!

Can this be added to a línea mini non IOT?

Hi, where can I buy this?

Pretty nifty I was looking at your mods before I went with the Mini and the default stuff still really cool!

This is epic! Would love to add this to my machine

I just got my barista touch and I feel like too much grinds comes out and I end up wasting coffee. How do I fix this with grind size/time? I don’t want to weigh my beans

Perhaps a silly question. Does the pro version still work if you remove that battery? I'm thinking of course of the poe-power option, using the usb-c converter to provide power to the device that way. I'm struggling for clarity on these specifics. I know there is a pure poe version meanwhile, which is nice, but definitely cannot connect to an oldschool mechanical chime. What I would really like is the ability to poe-power the doorbell, and still have it activate the mechanical chime on press. Ideally without any lithium pack installed(!). Any insight greatly appreciated...

I am loving that one, you should sell this as a mod, I know some that would want to buy something like that

Can you please give a link to that scale that you are using? Nice review.

Where are you located?

Damn, this is awesome, I wish I could come up with something like this!

God’s work

Really cool stuff man, liked the setup a lot it's very clean.

What's that screw driver kit?

Freaking awesome.

Great improvements since your last iteration! Two questions: 1. Would this be possible to achieve through a standalone app (e.g. like the la marzocco home app), or is the hardware you’ve built needed? (Wondering if this is the reason LM state older lunars aren’t compatible?) 2. Would this work with other Bluetooth enabled scales? e.g. Felicita arc Amazing work!

Thanks for this, do you happen to know the best way to disconnect the G4 (non-pro) batteries? my doorbell died in a storm, and I want to take it apart to clean it in IPA and dry it all out. I am loath to remove ribbon cables while battery2 is still connected, the connector isn't on the same side as batt1

Thanks for this video - I had a G4 Doorbell - I had RMA'ed 3 of them to UI and they sent replacements. All due to the cold Canadian winters. The Doorbell Pro is currently on sale ($199 USD or $269 CDN) and I just ordered a Pro based on your video. Here's hoping that it'll last longer!

Very inspiring. I am working on a DIY brew by time project. Did you find power in the machine for your controller - or do you have an external power supply?

Dude, this is amazing! You mentioned pre infusion in the video - is this able to control that also?

Nice! I was pretty bummed out by LM after hearing it won’t come to the Micra. I will probably try this project as well so thank you for your video!

Incredible 👏 it does seem odd that La Marzocco have stated that this functionality won’t be coming natively to the Micra

Fantastic. What bellow and PF stand for the Niche are you using? And is that a shelf liner on top of the Micra for cups?

Very nice work! I love the use of the Raspberry Pi. I own a Mini and given that the Micra and Mini use the same paddle switch approach, I would imagine it would work for both. I would happily buy the build instructions or the finished product if you were heading in that direction. I've built some Raspberry Pi projects and this would be a blast to DIY something like this for my Mini...Kudos for your ingenuity...seriously, what a great piece of engineering!

wow amazing!

Absolutely amazing work. It would be so good if you can post the bill of materials, code and 3d files so the community can replicate and iterate! I have a gaggiuino myself and lack of BBW was one thing keeping me from upgrading to an LMLu. I’d 100% buy a Micra if you publish this project.

lol if you were to do this now EA would either be full or broken...

Dude, your stuff rocks! Seriously, you need to start selling it. People would eat this up haha I can imagine it would be nice to have it place on top of the machine like a little integrated display top panel in wood or somethin. Thanks for sharing anyway! Continue the awesome work!

Great Video and Tutorial, thanks for sharing. BTW what kind of protection are you using for the cup tray? Looks interesting. Thanks for short reply.

Bravo! Would love to add this to my Micra

Amazing work! Seeing how easy this is, I can’t undestand why LM doesn’t give us the option from the beginning or with a paid upgrade to the Micra. I’m also interested in the pad you have on the top.