Видео

Thank you for making this video. My small screen is much more bent up, but the idea of making a jig and clamping it straight is excellent. Since the storm windows are an odd size, I'd have to get something custom made. I have a couple of vises and may use them, too.

I did the same thing.....Bingo!

Tim , did you clean off and add new heat sink compound on the main board heat sink? That might make it last longer. If the gpu chip can’t transfer the heat properly it could melt the solder again. It could be endless cycle.

Why is this not the first one to pull up when I research lg. Thank you God for this man.

Great idea. I was also thinking why not press out the kink. My screen has a serious kink on all 3 sides of the bend although it is not cracked or broken.

Tried making the jig, but was unable to, nevertheless, took the idea and just used 3 pieces of wood to substitute for the jig with family holding down the pieces and bent window screen frame back onto place!

U cut the trench to deep

Such a great video! Did you ever do a follow-up showing how you completed the process? Thank you!

I would like to get a unit of this equipment. Can you give me a way to contact the agency to get one?

Buen día, que tipo de aceite usa?

I baked the motherboard at 385 for 10 minutes. Worked on one tv and still working 8 months now. The other tv wasn’t so lucky but the plastics don’t melt at 10 minutes.

3/16th or 1/4in filter??

So....WHERE is the conversion video?????????

Ingenious! Thanks!

Also, don't forget to clean the spark arrestor, there's an inner and outer screen.

I think it has a few design flaws as something so new and barely used should not be having so many problems, i have same generator having what appears to be similar issues, mine had the inline fuel filter i did that when i bought it . Ill try cleaning the jet and see what happens, thanks

This was a great solution. Took me about 5 minutes to make the jig, had a clamp and straightened it right out! Thanks much!

Worked for 65UB950V 😎🙏🏻 Thanks from Istanbul. Lg is real pain. I have problem LG dishwasher too...

Holy fregan shite thanks. And GE sucks

Its nice to see a Kid actually working hard, you don't see this happen often.

Thanks for the detailed analysis and repair procedure. My wife has been enduring the cold start boot loops for over a year now. She started leaving the TV open at all times to keep it warm. Now the TV starts boot looping again after a few hours of being on, even when warm. I was ready to buy another TV, but I'll give this a try. Would really be a shame to throw away a perfectly good TV because a dollar's worth of parts failed.

Any update on this?

Bms 5s balance or enhance version you use?

Wow, that's great. Thanks.

CPE tech support told me that adding a fuel filter would constitute a modification that would invalidate the warranty on my 2500 W inverter genset which began to hunt and cutout at less than 30 hours and one month old. They told me that the carb might be bad and that it was back ordered two months out. This model requires that you dismantle half of the case to remove the carb but I did it and then cleaned the carb. Runs great...for about 4 or 5 minutes. Manual says that the fuel valve may be dirty and it is acting like its is switched off or nearly so. There are no instructions about cleaning the valve anywhere. I am starting to think that the single integrated valve/choke/kill switch is not such a good thing. Never had any problem with my Hondas with separate fuel c/o valves.

Any other replacement for that wooden jig?

Awesome! So simple but we needed you to show us!

Is that 100% sand or is it a sand mixture with 3/8 pebbles?

Does anyone know a size for a replacement spring?

Thanks for this. Mine is doing this and I'll try cleaning like you said

It's hard to determine from the video, I would of like to see how high the final product is from grade

Hello. Great videos. I bought the same machine from a guy, who had only used it once. I noticed you barely had any jams, and put pretty decent sized scoops in. We had, I would say a very good mix with ours, but the machine jammed a lot, sometimes we would barely put any in, and the weight of it would jam the ram. the instruction manual says to adjust the crank arm if needed, but doesnt say anything else about it. Did you have to do that at all with your Klutch machine?

Curious, with the slope style, do you have to weed eat against it, or edge it ever, or does you mower deck cut it clean enough?

Electric Kerb machine: $1200.00 Angled Print Rollers: $300.00 Release agent: $50.00 Cement colour/dye: $50.00 Pneumatic tyre Wheel barrow: $250.00 Shovels: $150.00 Tarps: $25.00 Petrol Cement Mixer: $500.00 Petrol: 10Gal. $50.00 20V Dewalt Blower: $200.00 Portland cement: ($25.00/Bag) $500.00 Pile-o-sand: $200.00 “delivered” Buckets (4): $50.00 Sloped Hand trowel: $100.00 Hand-trowel kit: $50.00 200’ Electrical cord: $150.00 Pressure Spray bottle (2-Gal): $50.00 Grande Total WITH the free Labour? (Of course I missed some things I’m sure). $4,075.00 & You thought $7200 for 4 professional tradesmen guys to come out & do a couple days worth of work was way too much?. Penny-wise & pound (sand) foolish. You probably make $7200 in a single week you cheap arse bastard.

“A 4th. person could be a finisher then you’d really rock ‘n’ roll”?. Really now?, you like the cheapen everybody else’s labour but your own. You’re probably some entitled narcissistic CEO of a company completely out of touch with the working people you make your hundreds of thousands of dollars off the backside of each year because you’ve got an MBA. Major Bullshit Allowance.

Hi! Thanks for the tutorial. Can you please tell me the size of the clamp used?

I loved the adobe red color. Not a fan of the final color.

Thank you for saving me a buck

This is a genius creation! Without this, I would have been trying to use a rubber mallet! Thanks so much!

Where did you get roler from?

Do you still have the Klutch unit? Are you interested in selling it now that your done with it?

Thanks! It worked. I had 5 frames from a rental which were bent. Brilliant!

I have had this Generator for about 10 years and it has been used lightly. Did a full service on it, added the filter and was able to remove the carburetor piece without removing the whole unit. Cleaned and fired up. Still has the slight surging, but i can adjust the choke slightly to correct it. Great video, especially the "Small Spring" part.

Some scrap wood, a cheap clamp from harbor freight and problem solved. I fixed 6 bug screens with this method, 6!!!! Thank you so much. Most simple and satisfying repair I have ever seen!

This guy is a genius! Saves me from buying a new frame!

Would love to see a followup video on this!

According to schematics, for t-con rgbw cycle test, you have to pull pin 44 to 3,3V. Pin 44 is ground (as pins 42,43,45,46). How does this work?

Brilliant!

How long did this project take you to complete? Looks great!

If the machine is fairly new just turn your idle screw in a turn.