Видео

I spend so much time wandering really wish I had few days more . They ere really rough but they started excavating in the 18 century .

@ I think the French embellished the plaster casts but who knows?

Thanks More to come

I will have to pick up a few more Euro's!

I need to get better at speaking Spanish

@ I’m sloppy in spanish but a few beers helps. Working on German too. My spoken Dutch is crappy but I get can read it pretty well.

@ Babel is OK if you can get past africans speaking Spanish. I’m going to spend a week or two in Mexico to check it out in spring sometime. I think there are mining opportunities there also.

Thanks for watching , More to come

Graphite absorbs too much of the heat I like the outlines you get where pouring into the mold

@Hill-13 how about a mold in a mold, graphite mold setting in a steel mold, like the steel casing in a piston

@guytelfer1353 I will have to look , I like the ceramic clay melt dishes when I sprinkle borax on the material you Dan see it pool and I swirl it around or take heat off for a second the impurity to to the metal dish and stick to the sides

Thanks we will be going after the gold next week

Probably should have weighed them but the sulfuric acid stripping cell just strips the gold . It settles down decant , filter the electrolyte/ sulfuric acid . Process gold reuse the acid for another run

@ Cool. I like your videos. Always something to learn.

@ It looks like strong sulfuric anodizes the iron mostly. The rest drops as iron(III) sulfate. Interesting. Easier than Eco-goldex E.

@ we are all in this together

@ I got all set up for chromatography but it doesn’t seem practical right now.

2 liters 2 X ( 100-140 ) g of silver per Liter of solution Nitric acid used depends on silver content ( 1 -2 ml/ g of silver) Add equal amount of water. So that had close to 250 g of silver In 1000 ml of silver nitrate then double the volume by adding equal amounts of distilled water

Can the solution be used on multiple cementing process?

@ no

Thanks!

I came up through a HVAC sheet metal ,used to not wearing gloves . Little cuts every now and then mostly blood blisters from pinching .

Not really a great note taker can you send pics to Hill13refining@gmail.com?

I will try and find some data

@Hill-13 awesome brother it's for scrapitall. Trying to find per gram of contacts silver content

It really varies some smaller contacts have a thicker silver plating and some of the bigger ones fool you with the base metal content . If I had to wild ass scientific guess 20-25 % silver content on the smaller contacts . I have video I made close to a year ago , I can check but I watched his video of the breakers and the contacts I processed were different .

@@Hill-13 cheers brother

Me too plus I use it in the laundry also.

I filter it collect the crystals and cover them with just a little water . When I needed some I take out some then put it in a filter to dry it out . Check out AKBear’s YT channel his method of making Iron Sulfate is pretty solid .

@Hill-13 Thank you very much my friend for the valuable information, good luck to you

@@Dahbawi goldrefiningforum.com/threads/lye-as-precipatant.25260/#post-267801 Check this out dissolve in hot water add a dash of HCl to oxidize the iron sulfide

Sometimes I wear safety glasses bad habit on my part but I did wear I respirator

@ Strongly suggest a face mask around any hot acids. I use a fan mostly outside. This is where it would be nice to own your home so you can cut holes in the roof etc.

@ I trust airflow more than respirators. I am very allergic to wheat dust and I used to work with breeding. No matter what the respirator I would be near anaphylactic shock after about 4 hours.

Me too

@ I like your channel more than Sreetips. He is kinda on production level while you are experimenting with new things.

@naughtiusmaximus830 thank you I still like watching him. That redux / distilling rig that was used to capture NOx was pretty cool . I’m going to do that next . Instead of building a scrubber for the hood right now.

@ Is that to recycle silver nitrate? I don’t want to mess with nitric fumes at my level. If I had a barn somewhere I would.

@ Feminist like to make a big deal how the patriarchy forced Madame Curie to work in the stables. The reality is they knew how nasty the shit she was working with was and didn’t want it in the building. Lung cancer seems more common in chemists. In the past anyway.

Mine too I didn’t think about melting it first . Jeez I do things the hard way some times I heat the metal up then add some flux I was rushing a just grabbed a chunk and rolled w/ it. I was going to try and seperate solutions later today by freezing really do like how you maximize your value on reusing solutions and salts

Thanks

You can I studied for a couple of years then decided to do it

Thanks . I studied for a while , I must admit I watched a lot on Dusan999 and Omgageek, I have refined just over 2 kilos of silver and just 23 grams of pure gold

It would be interesting to see the results , can it be reused how do you treat the waste w/ bleach ?

@ The spent stuff is pretty non toxic according to their site. I gave been storing it so far. I think you can dump it after treating with hydrogen peroxide. I’m still learning.

Not much gold on newer computers , I prefer to get things given to me . Just received some scrap electronic material from a subscriber look for an up coming mail call.

Stay in school

Bull ring nose pliers and.small side cutters 15 minutes

@Hill-13 Ill have to get a pair and try it.

Are you using the Eco leech to selectively remove gold from circuit boards and pins ? I have to incinerate the filtrate and papers from removing the silver in the slimes now .

@ Yeah. I was going to incinerate what was left over. ChatGPT suggested leeching over incineration. I’m not even going to crush them. My current batch is crushed broken solar cells. I put them in a rock polisher with large ball bearings. I have heard you can used grain shredders for pc cards and memory but I’m going to try this first.

@naughtiusmaximus830 I think that you might be on to something

Sorry anode although in the eco goldex they seem to reverse after a day or so and you get a precipitate which they say has good stuff also. I then drop the ph (outside as it offgasses cyanide) and precipitate with zinc wire. I’m still playing around with it obviously.

@ I’ll keep posting. I have my own atomic absorption spec I just haven’t set it up as I need venting. The benefits of Eco goldex is that I should be able to pop samples right into the AA. With nitric you have to raise the ph which is a pain in the ass.

I’m dying , she’s a bad ass

She’s something alright she loves the garage and the dog never more than a few feet apart now

Work in progress . Need to complete the copper cell run , so I can do upgrades on it

You got it !

4.63 grams of silver recovered from the fuses and small contacts

@Hill-13 awesome brother

Lots of copper some aluminum , few capacitors and transistors. Trying to knock out things to reclaim space in garage really

It’s good luck in Asian countries. These fuse were in a commercial dish washer water heater . They were heavy plated I’m cleaning up the silver cement now. I have to say I really like your method of making iron sulphate . Man I have watched that video at least a dozen times and watch it every time I make FeSO4

This was from 7 small contacts and those silver plated fuses I’m going to filter the solution and clean it up this week end hopefully .

@Hill-13 yeah i remember what it was ! The silver chloride made it seem as though it was a ton of silver!

Probably my gravelly voice

Thanks new stuff in the works , finished up the slimes I did end up w/ a little gold

Sometimes it seems like there just isn’t enough time in the day. Spoiler alert the slimes are taking longer to filter

@Hill-13 the slime is to thick lol. I messaged you btw

@@Hill-13Ebay has 50ml centrifuges for like $150. I decant then refill until the tube fills up.

@naughtiusmaximus830 going to check that out . I need to buy more heavy duty beakers and another 2L filtering flask , hot plate , etc, really could use a big win with the Lottery

It’s had so much flux on it I think it’s sealed up but I do kinda worry about it sometimes

Nice bars 👍

@ one ugly one looks like 200 gram bar are the limit for the turbo torch . Silver cools quickly in the melt dish without another torch on it

@Hill-13 pretty or ugly, silver is silver my friend

Out of practice

@@Hill-13 that's what's great about this hobby, you can pour and repour as many times as you like😉

@@mattlevesque5927 oh it’s an ugly one !!

Thanks probably should have worked on the yard today just didn’t have it in me to do the yard work

Good idea!

@@scrappingonthefly77 thanks bro

@@Hill-13 yeah yard work isn't as fun as finding more precious metals.

I know right!

Just set back in my scheduling but now the AP in in one container , still green ( dark green ) I’m going to put a bubbler on it . I have some chip legs to dissolve and some boards also

Thanks for watching More to come

Thank you

Thanks I kicked the camera over while filming . Still working on bettering the video productions

I have to find a bigger container .

👍