Видео

0:28 Possibly same thing happend to me. I'm currently using ASUS TUF B450M PRO GAMING and the aura rgb from bottom right side doesn't glow rainbow too after powering the PSU. Does this mean my mobo is dead? PSU is fine when I use paper clip but when I connect it to mobo it still doesn't work.

0:45 “I m sowwy” 😂

Thank you for the video.. Same exact issue.. I feel like mine is probably out of warranty.. Ill check but for now its going to have to remain plugged in😅 All I did is swap power supplies and graphics card. And all of a sudden it wont boot.. Took the power supply to a different pc and it turned on right away, so I knew the psu was fine.. I’ve quadruple checked connections.. had no idea whats going on

Nice bhai👍

Looks beautiful

still looks awful

Using the button reassignment facility in the Logitech mouse app, I mapped the wheel click button to the DPI change button, and the primary Click to the wheel mouse click. It is a semi-elegant fix for the problems of the G102.

The Sensors is different than G102 Prodigy which is using Mercury.. They downgrade the sensor in this Lightsync version.

any idea what kind of screws are at the bottom of the mouse? I lost one.

Thank u man. I had similar problem. My pc didnt want to start, so i did what you did and pc turned on

It may have just been a faulty PSU to Motherboard 24 pin cable instead of the motherboard itself. Did you try replacing just the cable? I have the same issue and might try doing this.

Nexon should replace all the police car Fleet today

i cant believe it, such an easy yet straightforward solution. thank you so much, cant believe it works. i was about to buy a new motherboard, you sir have saved me money.

Damn. Thanks for the video seem like I have the same problem. Thought something happened from the move but it seems ASUS just crapped on me. Any recommendations for a plug play replacement mobo so that I can get my computer up and running without much configuration changes? Thanks again.

в мире шортов без оптического скролла невозможно жить 😝

So send back the shitty motherboard, gotcha. I had a bad feeling about the TUF brand. I should listen to my intuition more often.

Nice Powerslide bro! Just try rear wheel drive and I'm sure you'll get the hang of it and drift like a king

i have B550 PLUS..when i tern on the PWS it lights up the RGBs but wont boot. tried all methods but nothing...i just keep trying the power button for hours till it terns on normally then never tern it off! sadly I'm from RSA load shedding is my enemy I'm planning to buy a UPS. THANKS FOR THE CLEAR VIDEO BRO

The best crashes you get is on a custom race at the figure 8 track

Thank you! I thought I spilled something into the mouse. I have both double click and scroll problem. Time for a new mouse. Any recommendation in that price range?

The real fix for this mouse is to open it up and cut the 3 stupid LEDs out that make it glow.

how did you removed the housing of the two switches? :(((

Can I remove the sticker to make it all black?

Really helpful! I fixed my mouse! Thank you for the video!

My asus390A just started with this problem I have to plug out all the psu cables leave for about 6hrs and it power on via power botten

I just tossed a new AIO and M.2 into the Wife's and for some reason now I'm having this issue too. If I solve it I'll report back.

Cleaning it actually worked, don't know for how long but after testing with over 100 clicks there were no more doubles, thanks for the infomation.

Found the solution ruclips.net/video/eWpJu0daW7c/видео.htmlsi=QBRcuYIIKcipO4_M Basically its a resistor responsable for the boot that is faulty 🎉🎉🎉🎉 Happy 2024

Amazing! It works! Thank a lot

These PVC based side steps are bad, once they get cracked they become useless. Same thing happened and I bought a solid aluminium based side step and it cost me around ₹6000 for a pair cheaper than buying a single PVC side step. I would recommend everyone to go with aluminium as they are more reliable and value for money if some damage is done to the side step.

I RMA my G102 Lightsync 3 times during warranty....2 times for double click and one time for scroll jumping issue....and after warranty over my 4th replacement having double click issue and strange thing is that the 2nd side button (back button) with Kalih switch also having double click issue as I use it same as the left click.....but now I cleaned both of them thanks to your video..... I just want to say from my experience, you have to be very gentle and extra careful during the opening and cleaning 😊

This crucial ram, I think it is 1rx16. The one in your laptop was 1rx8.

Bro, how many ground clearance refuced after attatched side foot step ? Plz tell me Can we attatch in 190 mm

i have the same motherboard similar problem but the PSU is not the issue

А нахуй музыка в видео?

Broo you can pair 3090 with 7 5800x3d

Just generally speaking and not for this game or general satisfaction. This cpu bottlenecks the 3090 a lot. Also the ram is kinda slow for that system. I know this game is capped and in general you can enjoy games for sure but yea 3600 is very little for 3090. Bare in mind that in many cases that you might see 99 % gpu utilisation there is still a quite big bottleneck

What fps would you get without framerate lock set to 60?

Similar issue here on x570+ wifi, new build just a few months old. Just turned off a few days ago and will not come back on. The RGB lights are on, but when I press the power button the power supply (corsair rm850x) just clicks and the computer does not power up. If I disconect the CPU cable from the power supply and press the power button, it lights up and the fans spin for a few second and it appears to stay on, but no power is going to the CPU. As soon as the CPU is plugged in, it causes the power supply to trip so no power is being sent to the board and the PSU internal circuit breaker seems to be kicking in. Perhaps a short? Think im going to order new power supply and board to fix issue!! But I will be getting my money back from ASUS as this is just not right.

great race

my logitech g102 only has 1 screw on the button is it a different version? not sure how to open it up.

I took out my mobo to change the casing + changing some new parts and i think highly possible is the mobo because cpu is new and the other parts i tested was working. I buying a new mobo and to test it agn. Praying hard is that it is not the psu . Btw using SeaSonic, it has high review on it and after watching several video, MOBO has the higher chance to be Faulty from most part on the computer parts. TESTED the Video and the MOBO show light but immediately I drew the connector 4 and 5pin the MOBO died straight. My Conclusion on my case is that the pin on the 24pin on the mobo is faulty, lightly is 3 years old and is the part that is the hardest to take out .

how silent are they compared to p12 fans ? for single exhaust fan

same problem happened to me do i need to spend money on this issue, because i did nothing about this, it is only 1 year i assembled this pc PLS PLS REPLY SOOON PLS 🥺🥺🥺

Been having similar issues after almost 3 years with only a downgrade of gpu. I can do the paper clip trick then hit power button and it stays on. As long as i dont power it off i experience no issues or crashes. Once i shut it off to just not have it running 24/7, the led indicator light goes off and no power. Have to do the manual short to boot it up. Its this certain MB, looks nice and durable, just simply isn't. Thinking odlf switching to another brand on next mb now😢

Great video man. Thanks.:)

48k rp?????? thats 570euro! you got an insane deal! congrats. and btw you need to upgrade the cpu it is holding the gpu back a LOT

Look at me, I’m the motherboard now

That's Crazy, i rememeber jumping for 460's to 1080 :D

Very good pc case if you have many HDDs like i do.