Видео

I agree in wath you say,i have the new revo 7 and look like have some bug like your's,i whrote to my sealer and he told me i was the only one who have thoses bugs (3), but more the time pass,more i can see video about the revo 7 and discovery other bug, i paid more than your's because i m stupid but hope i will be able to resolved all of the bug because i like this gun

Do you think Steambow may have been sabotaged by Poe Lang?? Making time friendly yet sub standard products on the cheap, and charging full production costs?? Granted, it should have been picked up quicker. But I did hear about Steambow returning product as it didn’t meet standards. This was soon after the first batch of them sold out in UK.

The video could have been reduced to 8-10 minutes, far too long and bad Video Editing . And Steambow is lost .

Interesting! Not much of that content available for us here in "non-UK Europe" ;-) Good luck! I"ll keep watching ;-)

I replaced the body pin with a M6 thumbscrew. Just make it finger tight, it won't fall out.

" Not for self defense," what are you talking about? It's a sharp piece of metal, no it's not a cold steel, but it's small and stealthy. Knife fighting is ridiculous, or don't you know that? 😳🤣 Not a great review, grow up and try harder.

Long story short the M10 magazin is for the skip thats it !

Als ik de pin zelf zou vervangen met een schroef met een boutje erachter is dat een oplossing? Of gaat dat niet werken? Ik heb zojuist de Stinger M10 besteld (had ervoor de normale 6shooter maar verkocht en nogal spijt van) Wil het gebruiken voor zelfverdediging mocht er ooit de pleuris uitbreken in ons land. Kan ik de M10 dan beter annuleren/retour sturen en de "normale 6shooter" bestellen? Of zeg je ga gewoon voor de M10 versie en vervang de pin zelf met een andere pin met schroefdraad en een boutje erachter. Ik zal het verder niet gebruiken voor "target practice"

This is how not to do it! You just string it like a recurve bow. No need to put the limb in the body. Put the string on one end first, put the steel stringer cable over the top of the string. The other end of the string feeds through the loop of the steel stringer cable. Now, use your foot and hand to apply pressure and feed the string through the loop on the stringer and pop it on the end of the limb. Takes me a few seconds to string mine.

Thank you for showcasing the Steambows, I have the AR6 tactical and the Survival, problems with the company and the product seem to have started with the M10 .looking forward to watching your content, and by the way your English is better than my Dutch

As you say the two lines are useless on the front of the Limb

Mate, buy a Nerf Gun.

It’s a €50 target. you get what you pay for with a target

Oh man….now, I’m certain they have to ship a 100 pages instruction book to Some of their costumers.

Obviously you didn't get a lot of points right. For example: Steambow referred to the reloading safety improvement. Compare the old speedloader to the M10 magazine. Five open blades/tips to safely insert into the AR6. VS a bunch of arrows hidden inside an enclosed magazine with nothing to worry about.

Decided not to purchase an M10 after seeing this and other videos. The unprofessional way Steambow handles the criticism doesn't help either...

The thumbnail is too funny bro😂😂😂

Mag ik vragen waar jij je losse magazijnen haalt

i was gonna buy one of these but the price of the bolts put me off, only steambow bolts great review though

I have the ar6. Glad i did not get the m10. Thanks. I was considering the m6 aluminum upper magazine. Do you have any knowledge of these?

Steambow hasnt noticed they dropped a lot of quality trying to bolt on a "simple" magazine design. the Interceptor shows that if you want a ton of ammo & exchangeable magazines, that concept has to be at the heart of the design. and everything has to be build around it to maintain safety and quality and comfort.

I am not a fan of the steambow. I don’t like that you can’t shoot any manufacturers bolts you have to buy their expensive bolts. I don’t want to be paying $6 for every single bolt I lose. You will lose bolts eventually.

uh uh uh ...

the second arm you showed has an issue... the string was not turned enough before putting it on. it seems that the string is touching the limbs. that should not happen and is a indicator that it is not tensioned enough. on the first bow you put the sting on (the pink one) you did it right. do the second one like the first one.

the pink furniture looks absolutly gorgeous! if i get a stinger some day i will get it too! :D

you can put a small amout of grease in the caps, to make them stick while doing your stringi thingi :D

there are other takedown pins on the market. some of them have a spring detent ball inside the pin it self, not in the outside. maby you could fix your m10 with such a takedown pin. if i see it again, i will link it somewhere in your channels comments.

Has the takedown pin issue been resolved yet??

My string aid broke!!?? With the 90 pound...I did have the string aid for the 120 pound (metal color), so I used it instead...but I will never use the black string aid again...😱

You have good points, if only you didn't B1tch through the entire video crying about how the manufacturer is blah blah... Point is you still use their product, you have decent knowledge of it. Just help us understand without sounding like a puss... I follow you to support your shares, but it's a tough one to hear you complain so relentlessly.

The manual how to add the string to your limb comes with the original device. At least it was like that with my compact. Can't remember that I have even seen a manual added to any separately sold limb from any manufacturer tbh. Still remember how I struggled in the earlier days when I had to replace the string of a Cobra crossbow - well at least the procedure did not change over the years ;) On a General note, while the packaging is more on the toys side the device is still a potentially deadly weapon. Hence everyone should handle it constantly like that. Best example the Interceptor, pin has a small button to press. Well if you press it pin comes out and can get removed. Should you always check that the pin is 100% in place before shooting yup - at least when you see any potential contact happening before.

I damaged my Stinger lower body using the supplied strinig aid with the 120lbs limb. Its unbelievable they dont deliver a manual.

Thank you for the review, I bought my AR6 in 2022 and was considering changing to the M10 upper, won't after this. Also when I bought my AR6 I got the 90lb limbs (back then it was only 35,55,90) now I've been told you cannot shoot the light practice arrows with the 90lb limb. I don't want to spend 150 euro + shipping to buy all my ammunition again. In your experience do you think you need heavier arrows for 90lb limb ? or is this steambow trying to make cash ?

Thank. You for sharing this with us I was about to buy this and after watching your video I most definitely will not be buying this bow it's just not worth all the money they are asking for something that is not fit for market with the flaws you just saved me money and headache 💯👌

The parts to fix that problems you can buy at sportsmen target and crossbow action world👍

nice kitchen chair :)))) but... seriously, what do you think about the Interceptor crossbow?

You do excellent reviews. Can you do one on the Interceptor?

That’s shocking mate! 😮glad you weren’t hurt at all.

I solved that problem by reducing a little material from the upper, where the metal stables has contact to the upper. So it presses slidely on the takedown pin.

I just have the same issue. Could not shoot more than 20 times until the upper opened up. Damn dangerous. Sometims the bolts jam on the loaded M10. Steambow refused to provide a solution when I contacted them. I had to purchase a 3d printed 3rd party bolt that locks safe. I will never purchase any steambow product again. Thats a safety hazard.

You are totaly right. The friction lock of a important part (bolt) is no safe solution. Its so unbelieveable that they refuse to deliver a Safe answer for this.

18:55 Curious. I had the exact same problem. They have sent me a completely twisted 150 lbs limb. After returning it on my own expenses, they have sent me a replacement with a defective lamination. It's like they either have no sufficient quality control, or just don't care about customer safety - or both.

Do you have an external platform or mail address to communicate? I could send you the solution, even to the magazine problem (bolts falling out etc.), but I can't post it here.

Do you have a solution? Let me know! If it works and is safe, I’ll do a review about them.

I have Steambow M10. It never does that to me. I shook it hard that the pin doesn’t come out. I would have to pull to top receiver toward me a little bit while holding to pull the pin out.

Very funny..... 😂😅😂

What do you think about the limb axle arrangement for the string? Is it more efficient? Faster? Speed data seems impressive for the poundage - and low cost, of course. Notably, the idea does not seem to have caught on, but that may just be due to extra cost of tooling, perhaps.

Very nice crossbow

i have a redback and a 123tech magazine, not that tactical but much safer. you should get a revo7 or a mey interceptor

Steambow is Dangerous! This is all technical unfinished.