Видео

I've been looking but can't find the motors anymore. Let me know if you find similar ones!

Me niether ... I don't know which engine would be equivalent, I don't know anything about it

Honestly, I don't think it really matters as long as there's some kind of pressure differential and the air is moving. But even with PC cases, that's a huge debate.

@@protomor alright, imma buy a usb adapter for the fan cause i dont know how u plugged it lol but its more easier for me to understand with a usb adapter (on/off usb to fan and a usb a female to usb a male to make the cable longer) then i will just plug in into my pc, it will do the same job, i didnt modified my g29, only the steering wheel, butt cause of the size and the weight of the wheel i put on it, the g29 is almost overheating and i heard a lot of people saying that they put a custom steering wheel and their g29 just burned thats why i want to put a fan to be secure

@@koyume6330 since I made the video, there's smaller fans that you can fit lots of different ways but your idea will work. I highly suggest the RC car heatsinks and even thermal paste. Thoase will do so much for temps.

@@protomor yes but there is no output for the air so the hot air gonna stay in the base and it will heat After a certain ampunt of playing time

@@koyume6330 about 2:30 in the video, you can see the outlets cut out. So the fan can push air in the top, then it'll vent out the back. Or vice versa.

Something is loose. The type of stuff you're explaining looks like some of the screws that hold the base plate on. Flip the unit over and check underneath and make sure all the screws are tight. Next after that is the 3 srews that hold the steering wheel onto the center support. If neither of those are it, you're gonna have to open it up and poke around to see what's not tight.

@@protomor I opened the steering wheel completely, greased all the gears, then closed everything again, tightening every single screw, but it still makes the noise... could it be one of the two motors? Since it only makes noise on the right, maybe the one on the right?

@@samuelebravo4116 Hmm, the fact it's only on one direction usually means a lash issue. Where something isn't aligned. I dont' think it's the motor. But who knows.

Where can there be something not aligned?

@@samuelebravo4116 the locking plate that mounts the steering plate can be misaligned. I've seen the bow spring get misaligned as well. The bearings in the steering shaft could be going bad and causing the big gear to have slop. You can send me pic and video of the teardown and I can give my opinions. If a bearing is bad tho, I don't know where to get new ones

Interesting. can you send me pictures of the differences? I always did feel like the G25 was loduer.

@@protomor I don't want to take mine apart, there is a RUclips video called Logitech g25 maintenance by BTG that shows it fully disassembled. They moved onto helical gears in the g27 and later models.

@@mashedpotatoes5323 I'll take a look. Thanks for the info!

Additionally, I read somewhere that the Logitech wheels can operate on different APIs for force feedback depending on the game, some APIs allow the wheel to run at a higher torque all the time but clip peak torque events, whereas others maintain the dynamic range and leave headroom for peaks, this can give the impression that some wheels are consistently stronger than others, when most of them except for the DFGT have basically the same two motors. I only looked into this after a store clerk who had tried a few mentioned that the G923 was weaker for drifting compared to the G29 as it didn't correct as fast.

You have to make sure the FMOD stuff is enabled. Under the content manager plugins, make sure everything is checked and downlaoded. That's usually the issue.

@@protomor Youre right, just found it here, thanks!!

@@protomor Just one more question please (wich I prob already know the answer) but, what I wanted to do is to add a transmition whining sound for a already existent RSR 2017 sound mod made by ACFAN, but im getting into the conclusion that even with all the sounds already extracted, I dont have the actual Fmod Project from that sound mod, wich means that I would always need to build the .bank from scratch and not just add something and export the .bank, right?

@@romuloarrudaa sadly yea. Gotta make it from scratch

@@protomor Thank you very much!

@@guri-cat4885 ah... I would but I don't have a Logitech anymore. I mean you can use the back vents and have one in and one out. Just some basic airflow will do a lot

@@protomor if it only was that simple. I wanna put more than just fan mod on mine... More button (by putting gamepad controller board) screen mounting and etc small details.. Shit I actually idk who to ask. I tried to ask in reddit but got no answers

@@guri-cat4885 I mean I can help with that. there's all the wiring goes through the center axis of the wheel. So you can hook up all your buttons that way. Amazon sells button PCBs so that should be simple. Screen can be Arduino powered. Just make sure to not let the cables get rubbed through.

@@protomor Nonono you didn't really understood me. I have all my stuff kinda planned on where and how gonna be connected. I just need the top part as a model so I can edit it for my needs, make custom holes, custom mounting and etc and then print it out oor send it to PCBWAY Also about buttons. I meant new buttons and not reusing the ones what are already there, I'm using Logitech G25 but top parts should be the same

@@guri-cat4885 oh. Send one to me. I'll scan it lol

Only if the rattling is because something is loose and you tighten it while you're in there. But no, it won't make the unit any quieter. If anything, it'll be louder.

I would but I'm not able to ship stuff out right now. Someone has to have a 3d printer near you... or it's an excuse to get a new hobby lol.

@@protomor you know, that's a GREAT point. AliExpress, here I come lol

@@randomletterandnumber hehe dunno about Ali express but an ender 3 can be found used all over

Uh most only go in one way. Just take pictures before you take it apart. I haven't owned a logitech in a few years.

To me, if you need to replace mosfets, it's beyond what a normal person can do and cost wise not super worth it. I haven't looked into those motors but if the amp/volt requirements are similar, they should work. I do feel like you're getting close to the point where you'll break teeth though. If you want, get in touch with me via email (prototomor at gmail) and we can see what we can come up with.

Sorry for the late reply. The guy who bought it still uses it IIRC. But I don't know for sure.

@@protomor aight thanks no problem, got into this video when I was deciding what to buy between a g29 or a t300. I just thought that it was a very interesting and cool mod/upgrade if I went with the G29.

@@ekisagustin Eh T300 is kind of a waste these days. I would just go direct drive for another hundred or two. It's a whole other world man.

@@protomor yup i definitely agree. but my budget was simply not enough. well, i am new to sim racing and just testing if I am going to keep this kind of hobby. I'll probably sell it and upgrade if I got enough money but right now i am more than satisfied.

@@ekisagustin I hear you. Do what you can. it's worth it! I swear!

Sorry for the late reply. But yea, it's the same motor and such. They didn't change much of the internals at all.

There's code to read the "down" position as a separate button. But I ran into similar things and just put up wiht 6th being reverse.

Impossible, the whole structure of the wheel would have to be changed with new parts and would probably involve 3D printing and etcs, but no one has done this before so you'd be on your own to even begin this crazy project

Your answer ruclips.net/video/ZNrBQwilpzs/видео.htmlsi=QNDgoXUiwUtpaP_6

In the description he talked about the m63-n

@@youdontknowme9068 thanks but i cant find that one too 😞

@@tibijczyktv77 they're pretty hard to find and buy nowadays, even in aliexpress it's been hard to find them, but there is your best bet

I need to look into other options but I don't have anymore logitech units to try out.

Update - for some reason my permissions wasn't set on the D: folder. My mistake lmao

That's the limit of your hosting, not AC or CM

oh man this was years ago. It was noisy signals causing breakup or it was spark related. I don't remember which.

You could try an audio editor to make the mono file into stereo; I suggest ocenaudio

same you figure it out ?

Uh, make sure everything is unscrewed but mien did take a lot more force than I expected.

oh it's in the car lol. all the parts worked great.

cope

Stop being self centered

Why do you care

Or drill a third hole and put the rc motor there and split power from one of the already existing motors so that I have 3 in total

Sorry for the late reply. No.. you'd make the motors fight each other. Shortening their life.

Sweet! Glad this helped you out. Makes me want to get back into making these videos.

Uhh that sounds like a cold solder or the board is damaged. I'd have to see what it looks like.

The video should explain the insides pretty well. Basically, disassemble, make sure it's aligned and spins fully, put back together. But I'd say 90% of what I see is that the sensor wheel is broken or dirty.

99% similar. there's some extra buttons on some models, those may or may not work with some extra code.