Видео

Glad to help!!

Glad the video helped!

Thule gutter mount. ruclips.net/video/GT4xcEp7bJU/видео.html

Good to know.

I hope it goes well for you! Sometimes they can be stuck in there pretty good!

If I had a concrete wall I probably would have just installed the vent into the garage door. I don’t plan on moving anytime soon, but if I do, I will just cap off the inside of the vent and call it a day 😆

I don’t know if there is a benefit, other than running it off the carb just being easier.

@@DariusBuildz I gotcha, does it loose pull when the throttle is wide open or is it the same or?

Ive never had a problem with loosing fuel and Ive held this wide open throttle for minutes at a time, so I guess the vacuum at the carb port must be pretty consistent.

Thank you for the additional info and I’m glad this video helped you to replace and fix yours!

@@DariusBuildz Seriously, huge help. Thank you. I owe you a beer or something

If you are ever in NC let me know!

You're welcome!!

The 2.5’s are solid motors! I’m at 255,000 currently and still running smooth!

The part number is in the video title

Definitely can’t lean too hard. I’ve had them dig into the road a few times.

Glad it was helpful!

I have airlift 3H, which adjusts your height based off of height sensors instead of pressure. So this one in particular is the driver side front sensor and it has been a few psi lower than usual causing my tire to rub and pull on my fender.

The car feels like it’s going to call apart any faster than 60.

Are you gonna post a video of you fixing it? I would love to fix myself when mine breaks or is broken. ​@DariusBuildz

I have a video of me replacing my driver side axle from a few years ago. Orlando's - ruclips.net/video/mpZygG3GKFw/видео.htmlsi=VCgRrXG1FLfflA2d mine: ruclips.net/video/APjFsWCJhe4/видео.htmlsi=FCZ_IQPbeep7oplE

You will have to ask Justin for clarification as I am not sure.

I had that issue on my passenger inner light and it seems the lights themselves are faulty. I bought one off eBay and it has been fine since.

Happy to help! Enjoy your rattle free sound!

I love how the robot craftsmen kit looks, but I just don’t want to put all that money into this car for the kit, body work, paint and having to rebuild my wheels. Plus, the car needs body work and paint so that would turn into $10k+ really fast. I would rather to put that $10k into another project.

@DariusBuildz Yeah, I need paint on my roof so I too was thinking about doing a little something something. I might just get a lighter hood with some vents.

The robot craftsmen hood and front bumper are probably my favorite

@@DariusBuildz that is EXACTLY the one I am talking about.

Glad it helped!

Hell Yeah! I have ran across most issues! And as it continues, I will keep making videos on how I fix them!

It's a rivnut. They come in handy for all sorts of things that you need to be threaded. amzn.to/4cgWgCl

Thank you. I'll have to take a look and see if I can make it fit how I need it too!

Niche 440 cylinder and Wiseco overbore Piston.

Title says camshaft, not crankshaft

@@DariusBuildz Good point

Its not too bad to take those off. If you look up videos on replacing the radio, it will show you how to remove that dash trim to get to the vents.

I would also check the sway bar end links. They have been known to wear and cause knocking noises.

I always say that it is important for anyone that decided to do airlift to know how the system work and have a oh shit kit so that you can limp your way home. I have seen horror stories from people that have issues and are left stranded.

The ball joints have to be pressed out and pressed in and buy time you spend the time to source just the ball joints then spend the time to get the tools, or pay a shop to press the old ones out and the new ones in, you could have just replaced the entire LCA again. What brand LCA's did you install out of curiosity? ball joints: amzn.to/4cid5wX

Welcome!

For the price I paid for this, which was about half of what they cost retail, it’s better than nothing.

I don’t have parking sensors on my 2014 GT

If you have any questions let me know!

2015

So I have some vibrations when I'm accelerating in my 2015 Mazda 6 Grand Touring with 85,000 miles. It's only a minor vinration, but all problems start off small, and I want to get a jump on it before it becomes big. So my question is could it be that you've seen so far? I know my transmission (automatic) sometimes shifts rough but why only under acceleration and ot doesn't happen all the time? Suspension?

If you can feel it under early acceleration it’s going to be the axles more than likely. Determining which one, I’ve found to be impossible, unless one of the boots are ripped and is throwing axle grease everywhere.

3/16 amzn.to/3A7U4zM

🫡

I’m glad it helped and I hope the install went well!

I try too! I hope it helped!

Amazon from the TheRetrofitSource Amazon store. The link is in the description

Thank you and it’s lovely having a garage that is not 95 degrees.

The stock mount was cut off and a 1/4” plate was welded in with 2 additional cross braces under.

The answer is is another comment that someone asked

That ain't no help when u have more than 200 other comments, but I've changed them today already, good video, easy job​@@DariusBuildz

Oh dam my bad. I didn’t realize the video had that many comments 😆 I’m glad you got them replaced successfully!

Do you need it?

It’s a barb. I’d to run the fuel pump, this is just one spot of many that you can use

You're welcome!

😆. I’m sure my neighbors were just looking like “look look look! here he goes again 😑”

It is not recommended to gap iridium plugs since you can damage the electrode. These are not $3 copper plugs. Iridium are more efficient and gap can have a larger deviation and still perform as it should.

Glad it helped! Best of luck on the rear brakes!

If a piece off of the center console base has broken off, you will need to replace it. I would suggest ebay

Thank you 🙏🏽. I try to leave the fluff out the best I can!