Видео

@@ccmccoy7 ok so until the next update you don’t have that option. When you create the outline it makes the new outline and internal components a compound vector. You can go into edit compound vector and then select all. While holding shift key click on the outline you want to keep. Everything inside is still selected and press delete. Press done and you should be good to go

@ okay what about the out side? Do I have to connect lines on the outside to the svg? Then I should be able to outline that to cut?

@@ccmccoy7 if your svg is broken then yes. You can offset the outline until everything connects and go into node edit to clean it up if needed

@ thank you so much! Idk if you follow the xTool for beginners page but your page would def help everyone there. You could get followers from there

@ I don’t, is it against group rules to share links? I get most of my inspiration from the official group pages. If there’s ever any specific requests just reach out and I’ll post a video.

@ccmccoy7 sorry I'm on a version that will be released soon. The tool you have works the same just doesn't have the options yet. You may have to delete the interior elements that are doubled. To do so you can edit the compound vector from the outline and select all and while holding the shift key click on the outside profile you want to keep (this de-selects it) now delete the stuff still highlighted and press done. Now select all and create a compound vector and set to engrave.

Awesome. Glad it helped you. Be sure to download the file in the description. And as always you guys are my inspiration for content. If there is ever anything you need assistance with just reach out and I’ll make a video to address it.

I’m glad you like it. It’s so therapeutic to watch the rust come off

Please share. I know when I was a kid finding old rusty stuff in the field and woods I'd soak it in some Coke. Definitely much faster this way.

@ will do. It will be next weekend. Thanks

@@davebolthouse3989 anytime. Always taking requests

@@johnmccutchanfishing 🙏 always glad to help. That’s what this channel is all about. I prefer to teach rather than send files. If you ever need anything just reach out. My content builds as I help the community.

@justinaplaxton9900 any specific content needed and I'll get it posted. Thanks for watching. Always glad to help and also do 1 on 1 if ever needed.

@@wsi8451 all about making things easier to find. I just finished doing all my jewelry blanks. Now I don’t have to open the drawers each time to look 😂

@@guy7622 thank you you should see the knife I’m going to be posting! Sold in 5 min of posting for $120 took 20 min to engrave. I just posted pictures on the F1 Ultra forum and will be posting the video tonight or tomorrow

@@Rom3oDelta7 yes, that can be done as well. This is a quick option that will do the same thing 99% of the time without having to remember which Combine function to use. A lot of users never master this. So I gave this as the option. I will be doing some more advanced videos soon. The combine tool works great when I’m working on say a 10’ canvas breaking the artwork up onto a bunch of pieces for easy engraving. I’m working on a 129” x 50” canvas now and will be engraved onto about 140 honeycombs

@Michelle88-hola did you download the file? .00001 off into the nono zone can cause the error. It has to be precise. The error that I'm getting is for the marked processing area. If anything that is on barely goes out of this area the system will not allow you to proceed. I'm on a beta right now, I'll try to replicate your scenario when I'm in the studio next. And I think it's neat your Michelle 88, my name is Michael and I too was born 88. My personal email has always been my HS football number and 88.

@ thank you so much. Let me know what you find out. My 88 is the year I graduated hs 😂😂

@LuisSanchez-if7gi awesome. Ever need anything just reach out. I could have sworn I already replied but I've been getting that alot lately with youtube. Anyways cheers! Hope you and yours have an amazing Holiday

@@JeffFerry1529 if you ever need anything just reach out. I have 7 I’m trying squeeze in today and tomorrow covering a few requests.

Hold Ctrl and the mouse wheel. To zoom in and out Hold Shift and mouse wheel to pan left-right

@ thank you. New to xcs, use led to Vectric. New subscriber.

@@kevinrich4637 glad to see another CNC user branching off into lasers. Welcome. Always glad to help. If you ever have any questions just reach out.

@@jefflamer8403 I use the BL on stainless for Black color marking. I have done some knives with the Fiber for different effects

@@MehdiyeMuhammedi I don’t, it’s a huge flame 🔥 issue. But I can run some tests and provide a method to mitigate the issue. Give me a few days. I’m currently behind a few videos trying to keep up with Holiday orders going out. I use my S1 to cut wood and black acrylic. I have cut acrylic on the ultra but cuts are also angled so if the material is 3mm it’s really got to go through approx 3.2 mm of material at the angle. And no air assist allows flare up. I did do a test awhile back and put a small fan in front of the unit cracked. It may work ok by itself with an inline fan attached. I will test this soon.

@@MehdiyeMuhammedi approaching local business is a great way. Find local shops with handmade/ unique items. Find local facebook groups and keep an eye out for services needed that you can fulfill with your machine. I’ve gotten tons of work that way.

Can you tell me the plan? Should I get all the materials from them? Actually I don’t know what should I do or how do I started?

Can you tell me the plan? Should I get all the materials from them? Actually I don’t know what should I do or how do I started?

@@MehdiyeMuhammedi get some promotional items you can engrave. Pick 10 random local businesses that get a lot of traffic. Diversify them too. Make a few samples of the promotional items and drop them off with a card. Maybe even become a patron of the establishment before approaching. Just give them one as a gift and don’t try to promote yourself ( it works )

@@brycesisk5770 if there’s anything your ever stuck on just reach out and I’ll post a walkthrough.

@@MehdiyeMuhammedi not in color no. To get any color engravings you’ll need a stainless steel card that’s pre painted black if that’s the look your going for. I have some 304 test panels coming in a few days and will be running some tests and showing the results.

@@MehdiyeMuhammedi the flat necklaces? Stainless steel? I do engravings on all sorts of metals but some don’t react with BL. Usually only BL for stainless steel and I engrave that like the varsity football video each individual, with 3-5 passes. Depends on the blank on how much material there is to soak up the heat. I’ll do a video with settings today and show the engraving and final results

@@MehdiyeMuhammedi of course glad it helped

@@MehdiyeMuhammedi this is the F1 Ultra. What machine and software version are you using?

@ x tool f1 ultra i am using

@@MehdiyeMuhammediso at the 24 second mark on the video I used the machine to take a picture of the knife and since the camera is pretty accurate I used the vector tool to trace it. If you re opened the file the picture of the knife is gone. If you’d like to keep this on windows you can do what’s called a snip and take a screenshot shot which you could open back into xcs and it would stay there offline.

Thanks , i tried but But I didn't succeed. Can you explain it exactly or make another video for this section? Thank you.please ❤❤

@@beyondthecutcreations9391 I got it thnkss❤

@@bea4him57 awesome! So glad to hear. If your ever need anything just reach out. I know these machines inside and out.

@ I just let out a huge sigh of relief! Blessings to you and yours!

@@jharper74 if you ever have any questions on anything just reach out.

@@BinaryDisastr no problem. What machine do you have?

@@beyondthecutcreations9391 P2 & F1 (original)

@@beyondthecutcreations9391 The F1 and P2.

@ sorry. Easily distracted sometimes. A good range to test is 200-450 dot duration, 80-85 power, 400-550 DPI Jarvis using the IR on the F1

Yes, for the F series you can do smart processing under under defined. I did make another video for the F-Series for that.

Totally remember replying to this but dunno what happened. I’ll go over the settings in a video and what they mean and what they do to the results. Thank you so much for the kind words.

Thank you!

@@BinaryDisastrI uploaded a short video to go over Dot Duration and DPI I will do a better one later, but this should give you the basis of what will happen when adjusting them both. This is for Jarvis and I’ll have to do a separate video for grayscale which has a power band

@@craftingwithjean5599 thank you 🙏 If you ever need anything please feel free to reach out.

I hope it helps you get a lot more work done and more money in your pocket! If you ever need any assistance just reach out and I will do what I can to help.

@@pauloticks this is very encouraging, thank you for the kind words.

Thank you so much! This tip was extremely helpful!

@ if you ever need anything just reach out. I know this software inside and out.

Your very welcome. Just reach out if you need any specific tutorials.

mine doesn't even fall off and it shows me the error code, I plug it back in like you did in the video but it still shows me the error code every time (I haven't used the machine even once)

@@claudiapeter9731 unfortunately if you’ve gone through all the troubleshooting steps the sensor itself could be faulty. Below is the link to the article. Step #3 listed below. I would contact Xtool Support at facebook.com/share/16NHG61spw/?mibextid=LQQJ4d they will be online today around 6pm- Friday Morning until about 4am pacific time. support.xtool.com/article/1281 #3 Replace the sensor with a new one If you've tried the above steps and the issue persists, it's possible that the sensor itself is faulty. Please record a short video that shows the sensor is installed properly but still triggers the error. Contact our support team with the video and tell us what happened.

Anytime, if you ever need anything just reach out and I’ll post as soon as I can.

Often when I do the embossing preview the bumps match what is produced. When I do embossing without a depth map I get super clean pockets. I’ll add one with text and show how clean the results are.

That's a great idea, I'll try to remember to do that for future videos!

@@gregparker5732 will take note on that. This was a quick guide made and posted within a few minutes for a Facebook user having trouble. I will use one of my test pieces to show a video of the difference of the outcome using the same power and speed settings in the next week.

I figured it was stuck in the open position? The ac compressor stayed on. Only turning off with the circuit breaker. I would think that if it were closed the unit wouldn’t have been cooling? I’m no expert, just refuse to throw $ at problems when it’s a relatively easy fix. Thanks!

If you ever need any help I’d be glad to do a quick video. I’m trying to be more active on here again

I get hesitant these days to update lol. I'll surely download a new one and update some of these videos. I'm glad to of helped at all.. Feel free to submit any issues your having and I'll post a video workaround asap.

I'll look into it today. I've been avoiding an update on my end. What version software are you running so I can make sure we are on the same one

Did you try using Cntrl V to paste it? Cntrl C works on my end to copy even on the new update.

Thanks for enjoying the video. Hopefully soon I'll be back at it.. anything stumps you if I can help I will. Have a wonderful day.