Видео

I didnt have an interface suitable for testing at the time of recording and my K688 sounded broken through it. replacing the interface solved this issue, i have sound tests on all my recent mic reviews from wirless lav systems to gaming and podcast mics now. sorry the video sucked, im still new to this.

Right, i was pretty afraid going 25mph on it and the steering fully locking up on me, glad it was easy to deal with and didn't murder me along the way lol!!!

Sorry that happened to you mate, maybe QC not what it used to be? been using mine daily for months and no issues! strong reviews from verified purchases online too.

bought it with my own money and reviewed it because i was reviewing everything infront of me at the time, the link is a standard amazon affiliate link and the only way i monetize my channel, think about 17 or so of these have sold through my link and earned me approx. $4 in total affiliate commission to date 🤣 It's legit a dope little speaker for the price, served me for about 8 months before I got my studio monitors unpacked and setup, now my kid has it and loves it too.

@@YoukayTV Oh cool! Thanks!

Enjoy it bro, it’s still my fav camera backpack!!

Not waterproof, light splash should be ok, but no riding it in the rain!

Thanks bro! I'm pretty confident on it now, its such a blast! my fav PEV i've tried to date lol

Thanks for the feedback, appreciate you!! 🤜

are you using a decent usb c cable and plugged into a usb 3 port? it should be pretty much plug and play for 1080p, if you check that first and its still freezing, try turning active track off, I've heard that can cause issues in webcam mode with the latest firmware, if none of that works, try temp changing the rez down to 720p to test, in the video capture device > properties menu, or go into the main obs settings (file > settings > output submenu > recording and make sure your using the appropriate codec for your pc!

@YoukayTV I just subscribed I really appreciate your time and help on this. It might be due to the tracking. I'll try your suggestions tomorrow and update you on what works. I wish there was a way to live stream without the wire. If I'm filming in front of a desk then the wire usbc is perfectly fine. However I'm now filming walking around about 10 ft from the desk and requires a lot of zooming in. So walking around with a 14ft usbc plugged in seems odd. You would think this camera would film live wireless for a live stream? Again thanks brother.

Appreciate the sub bro! Yea I’m surprised it’s not doable via the mimo app to be honest, knowing dji it may come in a firmware update though, it makes sense! No worries, I’m always around, lmk how you get on and if I can help 🤜

@@YoukayTV i came across this video today and wanted to know your thoughts on this. The video is titled USB UVC webcam to HDMI works with DJI Osmo Pocket 3. Basically it converts from USB to HDMI. What exactly would this conversion allow by doing this? I personally do not understand what the difference is or what we might be able to do with this option? The guy who made the video seems very knowledgably. Just search the title of the video his channel name is Emerald Audiovisual

@@YoukayTV just came across another good one that is perfect for me title is Turn DJI pocket 3 be HDMI output for atem mini pro us UVC to HDMI this is what i need because I'm looking to setup a multi camera stream with 3 of the pocket 3's going for different angels and being able to just hit the switch between each view.

good question - you would use dyamic framing when you want more control of where you are in the frame, a good example would be a cooking video, using normal active track, it puts your face in the middle of the shot and keeps it there, so nothing your working on, on the counter is in the frame, with dynamic you can set the framing and get you head above the middle of the frame, so the counter and what your working on would also be in frame. hope that makes sense?

​@@YoukayTV thanks for your response. It makes sense. What I don't get is that with regular active track, I can still move the position of the object being track on a any part of the frame. I see that Dynamic tracking allows you to do the same via the 9 spots. Wouldn't that make these 2 features virtually the same? That's what is confusing me as I am trying to understand the difference if there is any. Thanks again!

happens a lot! i believe its 3mm

Should be fine happend to me I went to the local hardware store and got an new bolt your perfectly fine

Thanks for making quality photo and video gear thats affordable and accessible!! Excited to see what comes next from Tarion!

🫶

Yep and Yep! they last a long time, I only sswitched mine out because I was told it was good for hygiene, still cuts great!

@@YoukayTVmy buddy told me they didn’t send the same blade as the original one that’s the only thing that makes me wonder about getting it or not

this one only has USB or bluetooth, you will probably need one that has a 3.5mm to connect to a monitor, or check and see if your console can output audio via usb

bluetooth is just an option, i have mine plugged in via usb, if your console allows usb audio device it will work there too

this speaker has been for sale for over 4 years now, not sure whos copying who, its just some chinese speaker where everyone copies everything as soon as they find something that works lol

Really fantastic speakers for the price, especially when they are on sale!!

It’s the most fun I’ve ever had with PEVs! I’m more comfortable on it now having fixed the steering it’s bonkers fast and fun lol

Are you plugging them into the right output? The one right by the xlr is a trrs for headset combo mics, the other one is for headphone monitoring. If so do you have the headphone gain turned up and direct monitoring on?

@@YoukayTV I have the headphone gain turned up and the direct monitoring works. But just in general discord or just my main source of audio I can’t hear

ahh gotcha, yea for that you need to route your audio in for it to work, can you select the maonocaster in windows volume mixer to be the output device? I haven't tried setting it up to listen to pc audio through its internal headphone out, so not entirely sure, but i'd start there! you may also need to use a second usb c, or the included 3.5mm cable into your pc, then it be selectable via windows as the output device to be able to hear through it. again, just guesses, but good luck!

@@YoukayTV I think I got it working thank you. Tried another usb c into the back

ahhh so sorry for the lost footage, thats the worst!!! glad it was helpful mate!!!

Hey bro thanks for the comment! yea, the breaks really let this scooter down, everything else for the price is fantastic though, build quality feels phenomenal, I didn't go dual motor because everything I read lead me to believe that was mostly for hill climbing and since I wasn't experienced, I also didn't know what to expect for steering so that was why I landed on the G4. It's funny though, now i've tried it and really enjoy it, I mat go further down the rabbithole with these electric scooters, stay tuned!!

I subscribed brother, U will break it in just takes some time to get used to it and then u get more confidence, I might buy a G4 also, 11 tubeless tires and that its bigger than the G2 master I also lean for the G4 amazing scooter for the price, u can easilly change break pads on it takes 15 min - people install shimano pads what I heard, G4 looks amazing love the looks on it, let us know what range u get on it later🍺👍🏿

Thanks so much for the sub!! yea, I've been looking at replacement break sets, semi decent hydraulic kits are pretty cheap these days, so a future update if i lose confidence in these mechanicals. Overall, they aren't bad per se, I just know that cables going to be stretched and need constant adjustment in the future. Been riding a lot practicing the last few days, got almost 20 miles on the odo just doing local parking lots. I tried mode 3 (race) and its sooooo much power, really need to lock in the stance to counter the acceleration, nutty fun, but terrifying also lol. One worrying thing I encountered was steering. trying to go in a straight line, and doing micro adjustments with the handlebars to avoid stuff on the ground that sneak up on you, the whole stem kinda clicks, or snaps doing small handelbar movements. I'm not talking big turns or anything, just micro side to side, say to avoid a dip or pothole i didnt see ahead. its super jarring, shakes the whole front end and has me trying to counter it with my wrists and forearms. after watching some videos it seems like maybe the steering is too tight and will need some adjustment, but the clicking or snapping has be a bit worried. i'll report back on my updated video here in a few weeks!! thanks again bro!

I was on the fence! went with the g4 because of the 60v20ah system ultimately. rode some more today, truly love it but know it can easily murder me if I don't pay absolute attention to the road ahead lol, thanks for the comment bro, enjoy your g3 pro!

Awesome, glad it was helpful, thanks for the comment and have a great day!!

Yep, mine has been acting similar, it's a shame because I enjoyed that feature greatly but the numbers on the display have become wildly inaccurate for me to. The LCD battery indicator being a minutes number is going to be incredibly difficult to get right due to the size and quality of battery and bms inside, but latley, I've had longer shaves report to be 2 mins, and short shave touch ups also report to be 3 mins and similar remaining issues as well. I start fully charging mine now when it says anything around 30 remaining now just to be safe!

Thanks so much mate!!!

I tried to reach out and see if i could snag one to compare against the groomie but didn't hear anything back. SIlly to spend money on this, or even the new manscaped head shaver (which seems to have borrowed a lot of the tech in the groomie) when the baldie pro works just so well for me lol. I may buy one to test once this chan gets monetized in the future, stay tuned and thanks for the comment! 👍

@YoukayTV the manscape one is stupid price... I bought their original product the lawnmower twice & love them. But for $130+ while every single other brand is $99 or less, it is a really silly decision. I think the brand has grown too much & they rather look like a "premium" brand instead. The groomie & the freebird pro seems to be about the same price. But yah I can't find any videos on the freebird pro... which is weird with how much they advertise. From what I could tell? It came out 2 months ago. I wonder if they they want to make sure any kinks are out before pushing? Just a wild guess. I wish you luck on your youtube journey

hmm?

Thanks for your comment, the g1 neo is fantastic, especially for the price :)

I think if you plug it in via usb and it doesn’t show up as a drive then the only way would be via the mimo app I believe

Hi, thanks so much! I believe the pd400x requires 40db gain so the G2 should be more than plenty, I would say if your ever looking for a 50-60+db gain mic, I'd go for the fifine for the headroom. Good luck!

I don't believe so, its listed as ps3/4/PC - there may be an adapter to make it compatible with xbox though! look into the mayflash adapters, hear they make good affordable stuff

I'd get one of those selfie stick tripods and put it on one of those infront of you so you don't have to hold it for too long, and record 4k30.... maybe use the wide lens if you don't want to pan around too much depending on your distance!

you're welcome! should be able to share the card between them no problem!

hi mate, unfortunately the camera can only operate at 1080p in webcam mode.

⁠@@YoukayTVHello! I recently updated my Osmo Pocket 3’s software through the Mimo app, and the logs mentioned that the webcam mode can now be used with 4K. I tested it in OBS and it does work, but you have to change it on OBS itself. The active track doesn’t work in 4k though.

Interesting! i'll have to play around with it tomorrow, 4k webcams aren't cheap, so thats a pretty massive value add to an already feature packed little camera!! Thanks so much for the heads up! 🫶

try going into settings from the main dropdown, scroll to backup audio and turn it off, then see if it still generates them?

Couldn’t agree more mate. Check my latest video on the fifine sc3 mixer. I basically go on a rant about how good cheap Chinese audio gear has got and why this mixer is almost perfect for almost everyone

Seasonal allergies and wildfires, i have bad sinus and been a bit under the weather. will be back soon!!!

@@YoukayTV get well soon! 🙏🏼

try a different USB cable and a different USB port, if it still doesn't work, make sure you have the lastest motherboard drivers for your pc and run some windows updates! sounds like a PC issue to me bro, good luck!

Yea, I was super fortunate to find a steal on a rodecaster duo on my local market place which solved many problems for me, but I could have used the fifine and a bit of ingenuity to accomplish the same thing and saved several hundred dollars!! Thanks for the feedback and kind words brother, best of luck on your youtube journey!

Trust audio reviewers over streamers when it comes to audio gear budget or expensive I made the mistake of listening to youtubers/streamers and they got ridiculious takes

the g1 neo is an xlr audio interface, won't work for USB mics

Great feedback, thanks for your comment and tips!

good stuff, enjoy it mate!

🤣🤜

it does mixing to a stereo channel, 2 mics to left chan 2 to right chan

Hmm? i just did my head with a dullish blade after a week of growth no problem in under 3 minutes. lol

Should be fine with either interface mate with a decentish xlr cable!

Good stuff mate, enjoy it, its dope for the price!

you're doing fantastic Minnie, keep it up !