Видео

RS Regulate.

When I first started using the standard Liberty 50gr +P I had no issues. Only after shooting it for a while did I start to notice problems. So if you just load mags and don’t shoot it but one time you don’t really know if it’s reliable. Personally I prefer the Ultra Lights. It’s the same ammunition except with a two piece case instead of one. It assists with feeding and ejection the two piece case. I haven’t had a single malfunction with the two piece case design so that’s what I buy. I prefer Federal HST and Hornady Critical Duty 135gr +P. The Hornady load has been the FBI standard for two government contracts in a row. The red tip prevents the bullet from being clogged like a hollow point could potentially be.

Maybe. Hard to say. I didn’t have problems with the standard in the beginning. Only after shooting it a couple times did the Standard start having hiccups. The Ultra Light two piece case design assists in feeding and ejection. Haven’t had any malfunctions since I started running the Ultra Lights so that’s what I buy when I get the Liberty. I would recommend Federal Premium HST or Hornady Critical Duty over Liberty Ammunition. Even Underwood Xtreme Penetrator or Xtreme Defender are better options.

Best 22LR suppressor indeed.

Idk what’s going on I can’t see my response to your comment and it wouldn’t refresh.

It’s not the recoil. Ammo related. Likes certain ammo types suppressed.

Only thing I really didn’t like was the stock and the front end heavy don’t recommend suppressing full length rifles.

Not my M77. I was just trying it out. Personally the cheek weld from the wood stock doesn’t work for me. You literally have to jam your cheek against the stock and push down against your jaw line just to be able to see the irons. F that rifle lol.

Plan to get the YHM Turbo T3 for this rifle.

Depends on the platform. I’ve shot some pretty quiet 147gr with a SilencerCo Osprey 9 on a 9mm PCC. Glock mags I believe it used. My Mk57 is most quiet with the Mask and 55gr subs. I bet with a 5.56 can the 5.7 subs will be just as quiet if not more quiet than 147gr 9mm out of a 9mm SBR. I plan to get a 5.56 can for the Mk57 asap.

@@arcxcc no they are sending me tail cap replacement. If it doesn’t fix the light I’ll send it back. I plan to get the full size scout light asap. Already have a mod button and mount.

I have extra springs for new mags I acquire in the future. You will like them.

Thought so myself. Only things I don’t like on it are the stock and trigger. Stock needs to sit a bit lower for the cheek weld. Trigger could be nicer I’m used to the AKT-UL.

Really appreciate your input and well informed comments. Especially when it comes to 5.7. I have a lot of 5.7 I would like to test in gel after passing through a plate etc. Problem is setting aside funds for video materials. One day I will get some testing done. In the meantime thanks for watching. I was most upset with the Garand Thumb lethality test. Using only range ammo to demonstrate a calibers lethality is absurd.

@@gnomereviews The Garand Thumb team seemed to be pretty impressed with the performance of the Speer Gold Dot 5.7 in the gel tests but went off the rails when they compared that range ammo to the Speer Gold Dot 9mm defense round. I agree that was a meritless comparison. The problem was that they just didn't have enough experience or knowledge about 5.7. That lead to the misleading statement that armor piercing 5.7 is very difficult to get these days. I think discerning viewers consider Garland Thumb's videos to be intended as entertaining rather than informative. The banter is entertaining rather than illuminating. Keep up the good work. The production quality of Matt Buffman's videos has improved astronomically from when he first started. I look forward to yours doing that as well. Please don't lose sight of the accuracy issue. (pun intended).

Matt and I speak on a daily basis. Don’t know Paul but I’ve watched plenty of his videos. Good guy as well. Yesterday I shot a 20rd full mag group with Speer 40gr HP in my Mk57. All 20rds in a 2” by 2” group. Less than 2” on either side. I will post a shorts video of the target now.

Video is going up at 9:15am. Let me know what you think!

@@gnomereviews hey, looking forward to it.

My buddy who owns it. This is his response to your comment. “I’m using a JMAC RRD-360-14F-KM. It squares off the muzzle face not the threads so it fixes concentricity problems. PBS-1s are overbored to account for the same problem so unless his threads are REALLY off center he should still be ok.” Hope this helps.

@gnomereviews I'm mount my pbs-1 to a zastava m77 same as yours So use a jmac for the threads right?

​@@thetest8777Are you using a concentricity rod to check?

So I have been having issues with the light staying on constantly. Replacing batteries way too often. Contacted SureFire. Explained my issue. Never got a response. They just mailed me a tail cap replacement so I can use a tape switch. Being they just mailed the tail cap replacement I assume the tail cap is the issue. I have a Modlite mod button and HRF Concepts Hunchback to try out. Recommended by a friend. His brother runs them on his AR builds. Point of this response is I’ll only be able to use the light momentarily with this new setup. So if you’re alright with that this light may be for you. I’ll make a post on this light after I get it setup in its new configuration. See how she does. Hope this helps. Definitely watch some reviews before you buy anything.

@@gnomereviews dang that’s good to know. thanks for the heads up.

Fit just fine

It’s the only trigger I use in my AK’s. I have the Galil version in my Gen 1 ACE rifle as well. It’s just designated ALG AGT-UL instead of AKT-UL for the AK’s. Thanks for watching and leaving a comment.

Thank you 🙏🏼

So SureFire just sent me a new tail cap for a tape switch for this Micro Scout. I’m waiting for the tape switch itself and Magpul MLOK mount. I have been having connection issues. I believe it’s the tail cap since SureFire sent me a replacement without responding to my contact form submission. I was getting ready to give up on the Micro go with a Mini. If this tail cap solves the problem I’ll keep the Micro.

NY and CA are very similar in their unconstitutional gun control bans. Magazine capacity restrictions and cosmetic features. This bill being introduced shouldn’t be a surprise to most.

I’m gonna copy and paste a Gen 5 owners statement here. Just as an example for you. If you look up Glock Gen 5 issues it will come up. “#1 · Dec 28, 2023 (Edited) Ok here's the story and the advice that I'm seeking. Brand new Glock19 Gen5. Enough rounds thru it to "break it in" From day one experienced Failure to feed with multiple brands of ammo and multiple mags. Ammo and mags worked perfectly fine in my gen3. Thing was shipped to glock and supposedly fixed along with GPT install. Worked fine for a few range trips except when it stopped working on the latest trip. Went and got myself gen 5 rental from the range. it functioned just fine for 100 rounds of my ammo thru my magazines. Got a carry gen 5 off of one of the range employees that one worked fine as well. so at this point I'm inclined to eliminate myself my ammo or my mags as the problem. On top of that Gen3 19 was my carry gun for close to 2 decades and countless rounds and nay a problem.”

@@gnomereviews lol haven't u heard the the glock performance trigger can cause problems. I don't touch my glock becides red dot and night sights. I have put roughly 3400 rounds trough it literally no problems. I can't even say I have had my ar run that long without something happening.

@@gnomereviews just one example, and there are plenty of examples of every type of machine that has problems. Shit I watched as my rmr was working then it wasn't working yet everyone else says there bomb proof. Well sadly not mine. But funny enough holosuns is the optic tht has ran longer. That's not to say rmr is bad might b dated. shit happens things fail that's normal. as far as I see it he used 2 other 19.5 and they worked so I would start at his pistol not the whole bin of pistols.

@@toadallyawesome5632 you do you. I’m just telling you what I’ve been told. Gen 4 trigger pins walk out on high round counts. Have heard many different Gen 5 issues. Gen 3 is all I’ve ever bought. Never heard of any Gen 3 issues. Personally I’m sticking with the Gen 3 19 100% factory.

@@gnomereviews gen 3s have trigger return spring problems as well the gen 5 is back to the single pin wich is better then the 2 pin design. And the 5s have better springs inside. O and I have a gen 3 use to have a gen 4 it was stolen. So I'm not just biased because I only have a gen 5. I'm just saying what I have experienced and what I have seen the 3s and 5s are the glocks to get. Gen 3 for more parts gen 5 better stock platform that's how I'm lookin at it. Nothing wrong with either. I'm sure that guy in your example could take another 10 or 10k I bet they would all work. Everyone and everything can b a lemon.

It’s nice. It will be a good first and only Canik.

Bullet is separating mid flight. Almost every round fired minus the first round fired there is two holes. No key holing either. My thought is the bullet was cut down too far when it was converted from 62gr 5.56 to 40gr 5.7. Brass won’t eject from my FN 5.7 MK2 pistol. Only the rifle it feeds.

@@gnomereviews good to know, anyways to keep those puppies held together mid air?

I use FN mags only.

Have some footage to upload stay tuned! All platforms including the 103.

The bill was introduced recently. Believe it will pass unfortunately.

FN factory mags hands down. Elite Ammunition magazine spring. Hope this helps.

You gotta use the “Ultra Lights”. Same exact round with a two piece case to aid in extraction. I had no issues with the Ultra Lights in my 2018 HK VP9SK. Have you tried those? If you want something for barriers in 9mm try Underwood Xtreme Penetrator.

I just checked. The 10rd baseplate comes with its own spring. I doubt it will work. This spring is for 20rd FN 5.7 MK2 magazines. Factory FN mags.

Yeah I know it comes with a spring, I guess it’s just a me issue how the follower gets stuck with such a weak spring I had to use the one that came with and another spring intertwined. Thanks for the review.

@@christiandunbar532 I’d stick with 20rd FN mags with this Elite MK2 Gen 2 mag spring. I can even run 55gr subsonic now with full 20rd mags thanks to this spring. With the factory FN mag spring I could only run about 15rds in my MK2 mags with the CMMG Mk57 and subsonic ammo. Luckily with supers 27gr SS198LF I’ve never had issues running full mags. That’s what my T2 Micro is zeroed for at 25 yards.

@@gnomereviews can you do a vid of running subs through linear comps ?haven’t seen that test. Especially since you’ll have less cycling issues

Yes and it makes the extensions work. The spring that comes with the 10 extension is crap. Since the inception of the extensions I have ran my springs to guarantee 100% function

Negative. Over time it polishes itself if you use it.

The ammunition used here is 40gr ****Hornady**** BLACK V-MAX 5.7x28. Hope this helps.

​@@gnomereviewsoh, thanks for clarification! appreciated it.

@@TitoOwelVlogs they are supposed to be releasing a Hornady Critical Defense in 5.7 as well. Personally I’m not a fan of Hornady using their own brass. FN brass is the only way. What I hold onto.

All depends on the rifle. In my opinion ZenitCo is the only way regarding modernizing an AK. Sureshot I would only consider if ZenitCo didn’t exist.

Also remember this is a legitimate SAIGA SGL31-68 last year of IZHMASH production and importation before the merge to what is Kalashnikov Concern. This is important cause the manufacturing process was much different. Now everything is state of the art. Done by machines for the most part. When my rifle was built it was done person by person. It was already very accurate. With the ZenitCo furniture it has become a precision rifle for me. Once I get the Dead Air Wolverine the rifle will be complete.

All I’m missing for this one is a Dead Air Wolverine. Heaviest ammo I have is 70gr. Hopefully it sounds decent with 60gr.

Like I said in my previous response to your other comment. Depends on what platform you are using.

The standard Liberty ammo won’t feed reliably in my 2018 HK VP9SK. Hence why I use Ultra Lights. It’s literally the same ammo with a two piece case to aid in extraction. I shoot and post my data/review. Originally when I first saw the ammo it was used in a full size VP9. Didn’t have any issues. Probably depends on what platform you’re using..

Preciate ya fam

I’ve gotten all my stock sets from Soviet Stocks over the years. This is before the war with Ukraine mind you. Can’t get the IZHMASH sets anymore. Wood or polymer. If you find any like you said it may be in separate pieces and you’re gonna pay a premium. I would suggest going that route. God forbid you find a stock set you’ll pay a small fortune for it. BCG/piston came from KVAR back in the day. I needed it for my SAIGA at that time. The brake you may find on Gunbroker. I believe I held onto my spare but I’d have to locate it. They start at a hundred beans on gunbroker. Idk if i’d let my spare go. Spring came from Russian Surplus. I recommend looking for all the stuff you want on Gunbroker and Russian Surplus. Hope this helps. Thanks for watching.

No I just switched to Ultra Lights. Whenever I get a G19 Gen 3 or 4 I’ll try running the Ultra Lights in it as well.

You just gotta run it in your tool. To each is their own. If the standard works for you so be it. Had issues in my 2018 HK VP9SK. Ultra Lights I had no issues. That’s what I’m carrying. 15+1.

@gnomereviews yeah but I don't think they make standard. It's all +p in tge 9mm. The primers over the years are different colors. The older stuff the box says 2000fps the newer box says 2040fps both both are +p

Right now I’m running a Red Earth Concealment shell. All Safariland parts and controls. OWB UBL & QLS. Had to buy the Safariland 5.7 holster first. Shell was garbage. So I had my buddy John at Red Earth use his shell and the Safariland parts and controls. Ended up with a really nice duty rig. Just waiting for my MK2 to come back. Had the new NT7 Plus plating done by Wright Armory. Elite Ammunition new trigger shoe will be put in last.

Works so far! Good range mags if nothing else.

They work 🤷🏻‍♂️

Have not shot a group with T6B. I am not against the idea. I am sure it won’t keyhole in my Mk57. I would refer to Buffmanrange for any 5.7 related questions on here or IG. If you have any questions ask him. Tell him I sent you. Hope this helps.

🤦🏻‍♂️. Idk what videos you’re watching bud. The Wound Channel had a video up of 27gr T6B shredding a 3A ballistic helmet from different angles. Buffmanrange has videos of SS190. There is no videos of 80Teeth.

@@gnomereviews I put the title of the video name & channel name at the end of the comment.

​@@gnomereviews I tried to post the link, but it was deleted or hidden. it's at 4:40 he says what ammo & 5:20 where it penetrates the vest he's using

Negative. I tried talking a friend into doing it with a larger channel. He has a chronograph. He won’t do it for personal reasons. So until I get a chronograph I won’t be able to get any numbers. I plan to run the SM855A1 and SS190 through my Dead Air Mask once it gets back from repair from Dead Air. Just to make sure it will run. My Mk57 likes SS198LF best with MK2 mags. I really want to find some older USG mags.

I use the “Ultra Lights”. Same ammo with a two piece case. Feeds reliably in my 2018 HK VP9SK. Unlike the standard Liberty 9mm 50gr +P. Ultra Lights is the way to go with Liberty Civil Defense.