Видео

Looks like it was a great day for a ride!

I have 2023 1000XL. Overall like it but have the same startling issue. Also the brakes are terrible. Have tried bleeding brakes but didn’t help. Anyone found solution to improve braking?

Me and my family have enjoyed our CF Moto Uforce XL. Plenty of room and great power that meets our needs!

I hate the clutching on my 2022 even after putting a aftermarket clutch kit in my machine. Struggles in high gear from a start with 30 inch tires. Burns belts constantly

I have a 2024 UForce 1000xl and I just installed the windshield featured in your video. Question I have is are you able to remove your hood with the windshield in place? I am unable to remove mine. Not enough space between the top of my hood and the bottom of the windshield. Any suggestions would be appreciated.

Seat belt, no adjustments and cuts into neck. Set your parking brake everytime because sometimes park doesn't alway lock in. Set your parking break first before you shift into park

Please remove the music in back ground very distracting but enjoyed the video

Cupholders ans storage space are the #2 reason for buying a CFmoto? Really?

Good video!

Getting it into Park is horrible. I just use Neutral and the Ebrake. Hood is not very easy to remove. 2 grease zerks on each rear wheel pretty hard to get to plus 1 under the front seats (you have to remove the front seats to access but next time i grease it I will line up a pinhole directly under it and drill out the skid plate directly under it so I can access it from undeneath).

Holy crap I have 400 miles on mine in two days…. Love love the machine

Uforce 1000 xl 2023 and the hard start is still happening with these units 400km and it happens 4 out of 10 starts ;).....

You are an amazing guy! Love you! 💙

I've got a 600 Uforce. The shift linkage is shit. It's noisy and vibrates in the cab. Outside is quiet. Those are the only things that are disappointing. Lots of machine for the money. Goes where I steer it.

I have a 23 1000xl doesn't like to start, shifter is 💩wishing I would have bought the can am

I love your deep thinking!

Hii sir Love from india

Hii sir❤❤

I have a 2024 uforce 1000xl same starting problem.

I thought you might mention the turning radius. From what I read the turning radius on it is more than twice comparable models in the same class,

The Ryobi chain saws are great for summer / fall clean up... not for winter trail riding. I would defiantly get this as a small property owner... but not as someone who adventures.

Anybody hear a clunk in H gear in normal after you start moving from a stop? Not mechanical so thats the best description I can give. The dealership said it was normal and said it was a tensioner releasing

I have a 2023 cfmoto zforce 800 trail g2. I love it and it was cheaper than my dream sis which is CanAm commander 1000. I am a devoted CanAm person but couldn't fit $25000 into my budget. I was online looking for sxs that wasn't like all the Polaris Rangers in my area. Bought this brand new this February 2024 for $12000. I did like they had a 1 year warranty which others brands have 6 month or less. After buying this unit I was like I wonder if they have a wider unit because the trail is 50 inches. Come to find out they have a 64 inch wide 950 sport. Now I want it. This 800 I have reached speeds of 85moh. Scared the heck out of me on gravel at 70mph, but highway it was 85mph, and was smooth. I have to agree with you that the plastic skid plate needs to be thicker or aluminum from factory. I live on gravel and when going over 30mph rocks hit bottom and makes thinks a rocks will shatter the plate or go through as if it is a bullet. My model had no parking break and when I put in park it would roll. I contacted the dealership and they contacted cfmoto and they sent a whole kit to put parking break on for me. The was new bugger calipers, bigger break pads, bigger rotor, the parking break, new brake fluid lines and the lever. It took them 6 hours to install and I was the dealerships first time & person/buyer to get this kit. So yes I am happy with my unit and now after is paid for in 2½ years I will go bigger and hopefully they with have the 1500cc units out.

I have a 22 and scraped and hit every protruding rock. Got some Hester Edition Elka shocks and love them. They’re a little pricey but smoother ride and 3” of ground clearance is what excites me the most! I don’t rub anymore

One the waiting for the fuel pump to rev up. You're showing your age (young). That _used_ to be the given for fuel injection motors when they first came out. You trained yourself to wait for it to spin up and stop.

Thank you for your u force xl videos.. It’s a really nice machine.. I just purchased a 2024 u force 1000 xl .. I need to drive 120 miles to pick it up because I ordered some accessories from the dealer, so it’s been a month.. I can’t wait to bring it home… Thank you for sharing…

I would also add that the brakes sqweek from brand new..

I got a 23 XL and agree with the ground clearance. I turned the shocks all the way up and ordered 30" tires. I also ripped up my skid plate and only have 14 miles on it! Haven't noticed the starting issues, but I've always let any fuel injection pump stop before starting.

Same here on my 22 I wait till the screen turns on completely before start

Put a lift and bigger tires on for bottoming issues. The CFMoto needs a bigger wider tire in my opinion, I have a can-am defender crew, 3in lift 32in tires no clearance issues

I have a 24 it still doesn't it is not just does CF moto I had a big horn that you had to let it prime before you started it

When it comes to the fuel injection needing to pressure up before starting that's a non issue, my polaris units were the same way.

Go Shane 50 more!

No one is riding in the rain without a damn windshield.

I do simple home exercises 3 times a week💪 Stay fit💪💪

Discover the enhanced features of the KEMIMOTO Vented Front Windshield, now available with updates. Have a great day💖👍TFS

One reason maybe it won't catch fire

Significant topic, it makes sense!!👍 Glad you have a positive attitude Shane.

You are a very smart man Shane! I am very proud of you! ❤️

As a 81 years old, I can only comment on how much I enjoyed seeing the” two man hand saw” behind you!! I saw it used by just one person who cleared an acre of forested trees ( 70 foot high) in one week in 1976!!!!!

I cannot be brought to Africa.

I love my 1000XL! The value just can't be beat.

Cool ideas

You make working out feel like a breeze. Thank you for the fantastic content! Great video

As a former owner of a 22 UFORCE 1000 XL, my advice to anyone looking to buy one of these is to keep it simple and you'll enjoy this machine. The value is the machine, not the accessories. At the end of the day, the choice is yours how you want to outfit your ride. Thanks for the in depth video! 👍

Nice table

imma have to stick with my rzr

But i cant annoy my jerk neighbors as much with an electric saw. Make it loud and smelly and youve got a sale. 😂

Yep already found that out when I put rear window in and oil on hands got on it and dust just stuck to it and used a micro fiber towel to wipe it off and scratched it.

Do you have any facebook pages?