Видео

Of course it will, the wolfmix has four Universes of DMX just patch it to one of those universes. This Light uses a 3-pin DMX cable.

You'll probably have to manually make a profile for it in Wolfmix since this a newer light, I imagine they don't have a profile for it yet. This lights user manual has the table of dmx channels and values.

@@bobbywarne7887 It takes a Rocker switch with three wires ground neutral and live. I cannot give you specifics as to how to install it due to liability so I'm assuming you have knowledge with electronics and the dangers of power and currents. Heres a link to a typical power Rocker switch: a.co/d/j4q3MEG

@@TheatricallyJerry thank you

@@bobbywarne7887 My Pleasure also the switches have markings by each metal pole that tells you the path like a N for neutral a L for live and a ground symbol so to me it's extremely simple to replace but could be difficult for others. It's a install at your own risk type of thing but the risk is extremely low as long as the machines not plugged in and the wires are going and correctly terminated to their correct position.

@@TheatricallyJerry The switch on mine is completely blank. I have the same machine you reviewed in the video and I agree that it’s very cheap in quality. Also I don’t have the thermostat style yours does and my wires are all black except for the red one spliced to a Load wire. However it smokes like a train and that’s all I need it for anyway lol. I appreciate your time sir, thanks again for the information.

@@bobbywarne7887 the new switch will be labeled they are labeled with a super tiny etch into the black plastic next to each pole. It's hard to see but it's there. Yes they are cheap and are sold as cheap that's what I like about it. It's not trying to be a $300+ machine. Great for Halloween displays outside or anywhere that you don't care if it gets ruined. This particular fogger actually puts out more volume of Fog than my ADJ VF1300 So it's actually pretty impressive for it's price point. Nothing on my channel is labeled as expensive or high quality (except the V-Show S series movers) if you buy it cheap expect it to look and feel cheap. Side note: I have already replaced the rocker switch on this particular fog machine as it burned out. The Rocker switch has a fuse built into it as well as the power supply IEC power connector.

@@imaniinternational7853 Girl Dancer by SoundJewel

@@SellarsArem The numbers are accurate in terms of power output, I can compare it to another 19x15w I have on hand but to my eyes it's spot on at 19x15w. I have the clone fixture which is a 19x15w but it's a Moving Head Light. I could do a side by side to see the power output.

@@TheatricallyJerry Are there any issues with PWM flickering?

@SellarsArem No the dimmer is very linear and smooth but it's not a 16 or 32 bit dimmer. It does have slight stepping at the lower end but all LEDS do to a certain extent. I did not notice any abnormal operation of the LEDS the PWM seems to be controlled well.

@@TheatricallyJerry today i tested the lamp myself, but ît has a noticeable PWM flickering. If you turn RGBW full on, you can measure a flickering with a camera at a shutterspeed of 1/320 and above. Also the Powerconsumption of the fixture at RGBW Full On is around 136 Watts, so its nowhere near the advertised 250W, nor the 19x15w LEDs. More like 7,5W per LED at RGBW Full on. So each channel only gets around 1,7Watts. i also noticed a flicker of the fixture now and then in manual mode. Very annoying. i cant recommend this fixture for streaming or even a venue, where you want to take pictures... the pwm flickering is visible as stripes in the pictures (testet with sony a7r3)

@SellarsArem I've not noticed any of these problems, I've been enjoying using it.

@@biswajitkarmakar4546 R20 profiles are a older format and require a separate file for each channel mode while D4 is a avolites profile and can store many channel modes in a single D4 file.

@@VickersDoorter I'll send you over to V-Show Jack he's the manager he can get you one, tell him TheatricallyJerry sent you. livedou.com/

@@VickersDoorter Just checked it and it's loud on my end, had to turn my phones volume down to 50%

@@TheatricallyJerry Not to worry. I'm going to buy some of these now having seen all your reviews, plus the CODE lighting desk you demo'd. Thanks for all your videos, I've just hit Subscribe.

It's an amazing light. I've enjoyed using it..

@@Life_of_a_dj_16 Purchased it myself, U'King has not sent me anything to test unfortunately.

@@TheatricallyJerry ah wow, you do loads of reviews must cost you a fortune then

@Life_of_a_dj_16 I do alot of reviews, but it's not that much money really. I'm used to fixtures costing 4-12k in theaters, these are budget friendly ones I usually review. It's a passion I enjoy lighting and technology and this industry combines the two for me.

@@HussainAl--Khalil Make sure they are inserted correctly, there is a marking on the fog machines battery lid to show which way they need to go.

@ I added them correctly if one of them is being recognized. The one with the positive end facing up is parallel to the usb-c port.

@@HussainAl--Khalil Sounds like one of them is in what I like to call deep sleep, do you have a 18650 charger on hand? Sometimes if they are stored for too long they will drop below a voltage value that allows them to be charged on a device and need to be charged on a actual 18650 charger. My SOC-IT has a 18650 and it wouldn't charge or power it and I discovered it needed charged in a charger first and then reinserted and then it would start charging. Hope this helps.

@ yeah thanks man. Your vid was the only thing closely to my issue I could find. I don’t have that charger I don’t think but I’ll look into getting one. Worst case I’ll have to get it exchanged. Luckily only had it for a few days

It has a fairly typical 540/270 which is why I left it out. It's maximum tilt is 0-270 degrees with a 16-bit precision scan. I did not notice a break in maximums, it's not the fastest fixture ive seen in terms of going from 0-540 degrees it takes about 2.4 seconds but I wouldn't expect someone to program a fixture to rotate that many times in one cue.

It looks dim because of my setting on my camera. It's plenty bright for a small to medium venue. You have to consider it's source lamp which is a 100w LED. You can't really compare it to a 19x15w because that's 285W Of combined total power. Also wash's do not concentrate the led light, when you concentrate into a beam it's much brighter than a wash. It's 41,500 lux at 16' at its narrowest beam and 115,000 lux at 9'.As a light designer we go by distance needed and light output at that distance so it would really depend on your needs.

@TheatricallyJerry how would you say it compares to a discharge bulb equivalent? I find it hard to shop led compared to discharge. Would you say this would be compatible to a 2r 132w discharge beam? Planning to use this alongside some 19x15w wash’s in a 30x50ft marquee but scared they may not be powerfull enough. But it’s hard to tell from RUclips videos and no one stocks them to demo.

@@kaykahlon3340 ill try to do a short on the LB150 next to a 19x15w to give you an idea.

@@TheatricallyJerry oh wow, that would be amazing!

@@HopefulWanderersEntertainment I really can't recommend a app for controlling Lights they just aren't powerful enough. If I had to mention some there's ADJ MYDMX Go or Luminaire 4. If you want to go a route I'd recommend software on a PC. If you want it in a iPad or phone then apps are the way to go.

@TheatricallyJerry I'm mostly looking for something simple that I can launch basic chases and such from the stage. I have a Venue Tetra Control but it can handle movers and how it's designed makes it incompatible with most pars

@@HopefulWanderersEntertainment it's more of a diagnostic tool for me, it does not replace a console or controller for running shows. The bugs are normal for console software every console has them. They do fix bugs if reported and issue updates. I agree with the subscription it should be a set price for the app, I try to avoid subscription services.

@@delariomario960 Yes you can program cues to play only when you hit the playback button below the playback Fader. You can also program their fade in/out times.

@@delariomario960 make sure your link mode is set to manual instead of automatic. Also hit setup-console options-console manage-playback go+/- enabled

@@TheatricallyJerry Thank You very much, It´s works

@@delariomario960 My Pleasure!

@@gautierpiton I'm not sure what you mean. The batteries come in a plastic storage case. I wouldn't remove anything off of the batteries in terms of the batteries casing or shell.

My pleasure! Yes they are pretty unique lights for sure. Just wish they were much brighter for larger venues.

@@lonnybush5612 I was pleasantly suprised at how well BeTopper makes their fixtures they feel solid. Compared to SHEHDS which I've had several with missing screws or they feel plastic-y. Yes! They should have called it Phase Cannon 🤣

@@saurabhjoshi1752 Depends on how much you use it. I'm still on the first atomizer but I use it only occasionally.

What's Code 9?

Victory 3 console 😊

Definetly a interesting light for sure!

@@rikisorsanveli9087 To purchase this directly from Temu, here's the link: temu.to/k/uziaf1xr61m

@@BaltimoreKrampus then it sounds like it needs a new atomizer or the sensor for the heater could be faulty, that's my guess without being able to look at it.

Try running it without the plastic cover that goes over the oil tank. I only just got mine working and was down for a couple of minutes and then said overheating every 2 seconds of use. Taking cover stopped the error. Though I haven’t fully tested if it’s solved. I came straight to this comment to reply 😃

Unscrew the chamber, make sure there's plenty of fluid in the tank, screw it back on. Also of that doesn't work, try turning the unit off and then back on. If its still giving you that warning then the tank may be faulty,if it's a used tank it may need replaced.

@@JuanZuniga-h2b You can try www.uking-online.com/?wpam_id=23 To control four of these you will need a light controller or light board. You could also use a PC based app to control them through usb to dmx out. I like Blizzard's Soc-It for controlling over my phone or tablet. You also don't necessarily need a controller these run on their own through Auto Mode and you'd have one set as master and the rest to slave and daisy chain their DMX cables and Powercons. You can also set the to sound mode as well if you don't have a controller.

@@TheatricallyJerry Thank! I tried uking but they don’t have it in the page. Tried Yuer, but shipping to Florida is more expensive than the fixtures!

Try Temu Or Aliexpress they should offer it with free shipping

Poquito Español, lo siento. Go+ y go - son solo para programas, puedes usar go+ y go- si has creado un programa debajo de la ventana del programa. Para crear un programa, utiliza sus reproducciones y las programa en un programa. Para hacer esto, vaya al menú de listas de programas y cree un nuevo programa. Presione agregar nuevo paso y luego presione agregar nueva acción y seleccione una reproducción. Presione confirmar.

Thank you! Super!❤️

@@Smoothnf No, the only reasons it would give you that error are that there's not enough fog solution in the tank, the tanks not screwed on properly(unscrew it and screw it back on tightly or that the tank is old and needs a new one. The atomizers are disposable and have a shelf life after liquid has been introduced.

@@delariomario960 Yes it's capable of controlling each Individual light. You would need to set it to the appropriate dmx channel mode for that feature on the fixture. You can also set up cells using avolites profile builder.

@@TheatricallyJerry Thank you... Your Videos are so great...

@@delariomario960 I appreciate the positive comment. I will have more tutorials on Victory 3 as soon as we update the software.

@@martinmtv7783 Here is a direct link to Mokas Website! www.mokalighting.com/products/moka-sfx-h-f01-1500w-hi-super-jet-led-fog-machine-instant-stop-dmx-remote-control-smoke-machine?_pos=6&_sid=814ea2cf9&_ss=r

@@jagdishprasad3408 You can purchase it through Temu, that'd where I got mine. : temu.com/s/tBmJ1sC0bMtGh

@@delandsenatus2258 My good friends over at U'King have it available! www.uking-online.com/product/zq06122-9-eye-cob-matrix-light-stage-light-for-dj-concert-party-weddings-nightclub-dance-hall/?wpam_id=23

What's a SMD screen?

SMD screen show wall

@kashifdass3729 I don't think Victory 3 is capable of displaying videos, generally you would use seperate software on a PC for that.

@@billpatterson9361 type in 6x50w Retro in Google search, you should get plenty of options for purchasing.

@@ReapersHorror Thank you for the compliments. We will consider that in the future. It's rather difficult to light things up because it's very subjective and also taking distance into consideration. We have to consider the watts of the LEDS as light designers and the beam angle to make a informed decision, we usually rely less on how well it lights a object. For instance I can make a informed decision that a 10w LED is not sufficient for stage use but is fine for mobile DJ's. Another example, a 10 degree beam spread will not cover as much area as a 45 degree beam spread. If I need a wash I would consider a wider beam angle if I want to highlight a single object I would lean more towards a spot light and a tighter beam angle. It's hard to convey a lights ability to cover a object through a video at varying distances,thats why manufacturers give Watts, Beam Angle, Lux ect.

@@TheatricallyJerry That actually makes sense, even to me. Thanks!

Very true!

Unscrew the atomizer and screw it back on, make sure its on tight and that there's oil inside the tank full. If you still get it, it's time for a new atomizing chamber, they have a shelf life.

@@TheatricallyJerry thank you 🙏🏼

My pleasure, let me know how it turns out!

@@VegasDominic Absolutely! Their build quality is great!

Yes, CODE handles transitions very well it has many options for how to handle transitions including effects transitions. I will do one today showing a new show as well as effects transitions.

Thanks!

@@delariomario960 If you start a new show you cannot carry over effects or cues, that's not a option for the console. You can copy cues and effects in the show you are using by hitting the copy button and selecting a cue or preset or effect you want. Anything you create in one show will not carry over to another.

Leave it, never leave the atomizer dry after you have filled it. If it's new and u filled its OK to leave it dry. After it's been exposed to glycol it must be kept wet so the wick inside doesn't dry out or degrade.

@@rickyslapstick You should never leave it dry once it has gotten wet, store it upright with glycol in the tank. If you bring it back out and the glycol is cloudy or yellow looking then you can dump it out and out new glycol in.