Видео

Yeah MARIN Bikes the infamous greyish-silver frames are always sleek and clean. Those white silver hubs and white cranks will definitely make the bike glow even more. Some how the Manitou 4 and the Manitou EFC always go very well with MARIN bikes. They just don't look very nice with ROCKSHOX Judy's. Yeah I love these old White Industries HUBs very much since the 90s too...The Ringle and Chris King HUBs just didn't hit me but they were very very good performance HUBs too. Another or my dream bike is the GT TEAM LTS 1995, the one with the FOX ALP 4R rear suspension. I hope some day I can get to rebuild one.

Thank you ThinkPad. Nice collection of GT bikes you had there. I am working on the second video for the Zaskar LE 95 stay tuned ☕☕

Thank you so much Steppenwolf : )

Thank you Resynthesizer & happy new year to you : )

Hi mpampis thanks for the sub. Check your plugs if they are connected properly. Channel 1 to (servo) Channel 1....Ch 2 to (esc) Ch 2....because there are so many wires to wires connection we lost sight. Make sure your plugs direction are all correct position too.

@ thank you!

You are welcome : )

Thank you very much Andrew & Happy New Year to you ☕.

@divisionbreak 👍

www.toykar.com/kyosho-spare-parts/10720-efth001w-pre-shaped-front-tire-h382pcsfantom-ep-4wd--efth001w.html www.toykar.com/kyosho-spare-parts/10719-efth005w-pre-shaped-rear-tire-l25-2pcsfantom-ep-4wd--efth005w.html www.ebay.com/sch/i.html?_nkw=Kyosho+EFTH001W+&_sacat=0&_from=R40&_trksid=p4432023.m570.l1313

Thank you Mike. 🎄Merry Christmas & Happy New Year🎄

我应该使用 Dji pocket osmo 来录制立体声。因为我使用的 iPhone X 只能捕捉单声道。谢谢您也祝您新年快乐。

Yes you are right those decals were quite a pain the .... to deal with. I should have use more soapy water technic to get them easier to work with in the positioning at the body shell. Yes the Plazma Mk II seem quite challenging as well.

@divisionbreak Yes, I saw a video of a guy using shampoo and water to make them slide across the lexan, then he uses a small, squeegee style rubber card to remove the soap. Same technique as window tint, just smaller scale. Then he hit everything with a hair dryer/heat gun. Im curious, what country are you in? Greetings from the Space Coast FL, USA!!!

Hi SpaceCoast. I am over at Singapore (South East Asia). Pleasure to meet you. 🎄& Happy 2025 New Year to you too.

Thank you very much Steven. Merry Christmas to you🎄& all the best in the year 2025. Take care. : )

Thank you very much Dwayne. Stay tune for a 2nd video with some upgrades with the 95 GT Zaskar LE later.....Salsa, WHITE INDUSTRIES, Ritchey, Continental, Maxxis..... & Merry Christmas to you 🎄: )

1. ESC : Kyosho LE MANS 240S ESC (Speed Controller) 2. Motor : Kyosho LE MANS 480T Brushless Motor 3. Sensor Cable (Route 246) 4. Battery : Gens Ace 6000 HV 7.6V 100C 2S1P

You are welcome. 🎄Happy Holidays 😀

Thank you so much Phil. Because what you are seeing there is the actual sequence of the parts availability from ebay mostly, then to parts arrival, parts cleaning, parts assemble to bike. Or new accessories from online shops ......which ever parts come first I will get them unbox and video record it in order. Hence while waiting for item to arrive.... I could be doing the wheels first or I could be cleaning the bike frame, could be greasing bottom bracket first......I wont know......so thats why the whole build there seem very random but it's the actual order of the build I took. And the whole process took nearly a year to complete....from hunting for parts online (subject to availability) , video recording, video editing. The GT Zaskar LE bike was purchased in June 2023.

@@divisionbreak thanx for your very detailed answer, know i can understand your intention about the build. a few years ago i wanted to build my dreambike, a MARIN Eldridge Grade from 99, it took a year to find a frameset for my height 55/56 cm, so meanwhile i picked a nice Mavic SUP wheelset with Hügi 240‘s, XTR 950 RD and FD, Magura HS33 raceline brakeset, KORE stem and handlebar and so on…, after repainting the frame and rebuild the bike i was so happy that it turned so nice….but 2 weeks later a lousy thief broke into my workshop and had stolen this and 2 other bikes i was devastated because not only the money but all the planning, searching to keep all the parts and all the hours of work to make my dreambike happen.. So always keep an eye on your Zaskar and enjoy your rides

I feel you man Phil. It must have been really devastating to experience that. When I was a kid 9-10yrs old (1988) mom bought me a Taiwan made USD$400 White BMX bike so that I could cycle to a near-by neighbourhood for tuition. I locked the bike at a housing water pipes with a cheap china cable lock. When I returned to my bike after tuition...it was gone. I search frantically every corners...gone...devastated....lost. Never had any more bicycles then on....till 1995 GT Avalanche. Which other 2 bikes the thief stolen from your warehouse? Your set up for the MARIN looks awesome I love those bright yellow MAGURA too. Now I am wary for my bike, I try not to leave it out of sight when I am out riding. Thanks for the tip.

@@divisionbreak hi the orher was a nearly brandnew Rose Count Solo ( from my son) and an older Giant mtb, hopefully my insurance paid for the damage.

I wish you all the best. Hopefully you will have a new bike some day to ride again. I actually have a 2nd video to present for the GT Zaskar LE later. I have finished up lacing a pair of Ritchey Vantage Sport rims to a set of White Industries Hubs. They were my dream Hubs back in the 90s which I couldn't afford back then. I am still searching for a pair (Blue) Salsa Titanium Quick Release. And hopefully some Ringle MOJO (Blue) Peace cantilever cable hanger. And hopefully a 26.8 Syncros titanium seat post. They are very hard to come by these days. : )

Thank you Grigory. I went with elastomers because I wanted that genuine that authenticity feel of how the suspension should be designed by the engineers. Depending how much you ride. I believe these Elastomers will last for a quite some time (a few years at least). And they are not overly expensive to purchase too for replacement in future. : )

@@divisionbreak Yes, modern elastomers should last considerably longer than their predecessors from the 90's. I have recently rebuilt an older fork that uses elastomers as negative spring (and air for positive spring). It works fine now.

What bicycle are you riding now Grigory.

@@divisionbreak Right now I am lying on a couch and not riding :-) Otherwise it's a bunch of different bicycles. The one with Magura Durin fork that I've rebuilt is not mine however.

They will still be recycled later at the sorting facility with the general waste.

Cela ne vous aidera pas à absorber les chocs lorsque vous roulez. Et ce n'est pas le but ni la fonction d'une suspension. Vous pouvez toujours conduire le vélo sans la cartouche d'huile... mais vous aurez l'impression d'être en train de faire un pogo spring stick et vous ne voulez pas ce genre de sensation lorsque vous roulez.

Thank you so much Amerigo. You are really 👍🏼. I never thought anyone would take notice of that you are very attentive very detail. Yes I wasn't convinced crossing the cables. Everyone took it for granted and adopted that crossed cable fashion for their MTB. I dug back to look at how specifically the 1990s GT Zaskar LE photos and learned how they were done. And indeed they adopted the parallel route. Don't look at those newer rebuild in the recent years in google images. Find those GT Zaskar LE that was photographed back in the 1990s...especially those from the 1990's product catalog photoshoot PDF.

@@divisionbreak I just double-checked on my mine. They are really crossed and this gives a very natural, harmonic curve for the cable sleeves. I'll have to install new shifter cables anyway, I'll see if I follow your path. Also, I'll have to open my Rock Shox Judy. Thanks for that video, too. Great work! Where are you located?

Thank you Amerigo. Try your best to keep the cable hose horizontal for about 1.5cm - 2.5 cm from their adjusting barrel. I used this video for referencing. Around time stamp= 3:25 (ruclips.net/video/Xg5MrDgLhHI/видео.html). I am over at (South East Asia) Singapore : )

@@divisionbreak Thanks, this is helpful - again. I will just follow all of your videos from now. Thanks for your support, with greetings from ZRH to SIN.

Muito obrigado pelo conselho 👍🏼

Hey Thomas. They are from SRP specialtyretroproducts. All the links are at the youtube description...

Hi Mark. The cleanest way to get it open is still the Pen-knife scoring method. Otherwise another way is by using a Dremel Tool. The Pen-knife method definitely require a pair of steady hands and determination and controlled force to hold the speaker down on a table and just keep scoring at the groove of the speaker shell. Try to find a (OLFA PC-L) Acrylic sheet cutter. I feel that cutter is way easier to score than the conventional pen-knife.

Thank you very much Gary 👍🏼

Thanks bro.

Thanks aada.

Thank you so much Tyler. I am rebuilding a set of new rims currently: (Ritchey Vantage Sport w/ White Industries Hubs). I'll get another video out for the new upgrades soon. Take care & ride safe. : )

Nice work Miller. All the best for the outcome Fantom. 👍🏼

Thank you John. Yes a silver crank like the XTR M900 would have been nice too. A blue set of KOOKA crankset or a CookBros I wouldn't mind too. I didn't like this flat profile look and feel of the Sugino Crank hence I changed it.

👍🏼감사합니다🐝

At the Official WPL website they do sell. Otherwise Aliexpress too. www.wpl-rc.com/products/d12-remote www.aliexpress.com/item/1005005934166395.html?algo_exp_id=e628fa3f-7ff1-489d-9c20-0c9acf617f49-1&utparam-url=scene%3Asearch%7Cquery_from%3A

@@divisionbreak thank you mate

Hi Roy you mean the grey tape at 19:40. That's just a Japan: 6mm MT masking tape. I wrap a tape there was to let the (shaft end plate) sit more snug-fit (tighly) on to the shaft end. You can also use any ordinary tape too if you find your end plate sit loosely at the shaft end.

Nice...👍🏼

Is it still stable at high speeds?

The stability of the board depends on how tight or loose you adjust at the Kingpin Nut. You don't want to over-tighten to over stiffen the board. Neither you want it too loose as it will be wobbly. The set up there has a very well-balanced of stability.

Thank you phillip. No the fork is unadjusted. I did not increase the knobs at the fork. Neutral.

Thank you very much Eddie. Nope no glue was neeeded. Only Loctite-Threadlocker for some screw joints.

@@divisionbreak Cheers dude!

The Trek 9900 OCLV Pro Issue 1995 was a head turner. I remembered my friend had one. It feels out of this world when it was released. Extremely light and the subtle carbon textured details was amazing. The 1995 Trek 9800 Pro OCLV purple color one is beautiful.

Thank you Alex : ) 👍🏼

Thank you bikerebuilder 👍🏼

Thank you for watching kz6nc. If you are going to redo the paint job for your suspension fork too try a stronger primer. The one I used in the video had some paint chipping off later. Try this or other brands instead: www.mr-hobby.com/en/product2/category_33/1872.html

You are welcome anytime touchstone64. Thank you for the kind words. And yes you are correct. Get yourself a new power adapter if the original one is what you will be using. Because they have been around for 2 decades. My blue LED started to get dimmer and dimmer, day by day, night by night till it just cut off sound/music all by itself but comes back alive when you hit the switch off/on again. I am living in South East Asia we use 3pins plug here same as UK. This is what I am powering now for my Soundstick II. www.aliexpress.com/item/1005004368708918.html?spm=a2g0o.order_list.order_list_main.434.51e718022tELro

@@divisionbreak ordered 👍 Again, thanks for your insight and for being so helpful 🙏

Nice. The new power adapter will definitely deliver a sonic impact for the HK soundstick for sure. It's my pleasure to help. All the best, take care & enjoy the music. : )

@@divisionbreak yep, certainly sounds great! The new power adapter hasn't had an impact on the LED brightness though, so I'm going to disassemble and have a look at the components 👍

You are welcome bro : ) 👍🏼

Me too ! thank you for the heads up on this item much appreciated!

Thank you very much Cycling Inc. 👍🏼

Thanks aplerenkaradeniz : )

Hi ronnie the original riser pads provided was really hard like some kind of cheap plastic material. The Carver riser pads have better cushioning and is quieter. Means it can absorb more vibration better than the original pads.

Thanks for watching madi : )👍🏼

Thank you for watching Ronald : ) 👍🏼

@divisionbreak you got it brother. Love the old GT'S

I hope I can find a set of white industries hubs. I'll re-do a new set of rims set up video: white industries hubs, panaracer tyres, spokes, spokes lacing...

Nice!...I am hoping for a set of White Industry Hubs too, 517 Mavic rims, Panaracer Smoke/Dart tyres. The 1995 Answer Manitou 4 / Magnum / EFC DH Forks are beautiful too. Thank you for watching Legodad. : ) 👍🏼

I just put new tubes and tires like 2 days ago and this video popped up! It’s a sign

Indeed 👍🏼... I am changing new rim tapes for both rims right now. My inner tubes started to blow from the inside on separate occasion. I suspect the spokes that are protruding and the deteriorated old rim tapes are adding some pressure to the tubes causing them to puncture. I got these: www.aliexpress.com/item/1005005444716181.html?spm=a2g0o.order_list.order_list_main.5.6e5e1802cZizYy

Thank you for watching Noel. 👍🏼

GT LTS-1000 DS that arching seat stay tube...that is a classic piece too. Another dream bike of mine was the 1994-95 GT TEAM LTS the one with the Fox Alps 4 rear-sus. Thank you for watching Igor. 👍🏼