Видео

2009 trailblazer doing the same thing...thank you buddy!!

All Im feeling is not to do it myself. I only do something tha wont take more than a couple hours and successful. Im not guessing or playing lucky.

Couldn't listen to you after one forth

Bud! Just made a t-bone followng your instruction. But I use a oven thermometer. Took it out at 135.Let rest 10 minutes. Delicious!!! Thank you. I will be repeating this technique on a rib eye.

I can't see it

Savor. The lighting on this one was much too dark for any of us to see anything.

Mine is 03 how similar is 02 to 03m

I would highly advise taking off the tire and accessing starter through pocket above frame rail, rather than trying to do it from the top. From side angle, it's much easier to feel for the nut on back side of starter and guide socket into place. The starter can also fit through this pocket with a little maneuvering. Trust me, after struggling to get the back nut off, you'll have a much better feel to get it back on. I'd also suggest filling your 15mm socket with some grease/wax for both removal and installation, to avoid dropping the nut. Your new starter will not come with a replacement.

You’re using a driver as a wrench you mong. This isn’t an automotive tool

When my pan reached 400 I put some oil and huge smoke came out my fire alarm went off

My back tail gate latch is in the locked position, so can secure it. The door handle has only one of two points of contact still working, so that's a concern. Ten😢 years ago, a girlfriend's husband fixed the tailgate window latch. Not too long afterward, it stopped working, too. Now that it is winter, I'll have to put this off until spring, especially since I'm still in recovery from rotator surgery 9 weeks ago. Local garage told me the actuator part is $500 and the labor a $120. Figure in door handle and window katch and I need to do this work myself 67yo

this is a great video! i found one of these at the thrift store for $8.90 and was wondering if it was supposed to be so loud 😂 but now i have some great recipes to try! thanks 😀

Just finished changing the Lift Actuator on Chevy Trailblazer 2006. Awesome video brother, completely was able to do this job with your video THANK YOU 😊

Picked mine up at goodwill for 14.00 and thanks for the video on how to use. The machine is in perfect condition and works perfectly.

The lighting was poor to dark

I had one and it's fantastic. I don't suggest trying it though, when you go back to regular steak it's disappointing.

wanker , just a common wanker.

I have 2009 and my rear lock is not engaging. I got one from pick in pull and still not working

That's a hot cast iron pan. How is he able to grab that handle barehanded without getting burned?

This video saved me!!! I dos this just today and my veil now matches my dress perfectly! Thank you! ❤

Ok, a few things.... A) I've never seen a more awkward handler of kitchen equipment in my life, I really wanted to switch off when I saw the garlic crushing debacle. I should have. The pans, the basting spoonmanship, all was as if these items had just been beamed down from an alien planet and it was his first time using them. Second, how much salt and pepper do you need? It's not to form a crust, it's seasoning. Thirdly, why do Americans all have such low skill with cutlery? Is it because you eat with your hands in cars so often? I'm English and we honestly look like surgeons while eating in comparison to you ham fisted, dim-witted, yanks. It's like you have pigs trotters rather than hands that can perform the most dextrous of tasks. It's just poor etiquette. Level up people, sad

Finally someone who comments on the oven step instead of just assuming that we know how to do it and skipping to the end!

Your video is hugely helpful! It's the best way to make a steak for us novices. It's a shame it looks like the uploads have stopped. Hope you’re well!

Is there a 3rd bolt (aka fake bolt), which would hinder starter from easily being removed?

Loosened all bolts, starter won't come out.

Dumb question, is there an actuator on both sides?

Thank you. Sounds really good. I’m going to try right now.

Your videos are helpful 🙏🏽

It does work!

I just watched a video with a butcher saying this was the second most tender cut of beef, second only to tenderloin, so not sure why the tenderizer.

❤ awesome love it

Hey mate you kill good steak like phillipino

Thanks for this video! But what if only hot air is blowing on both sides (driver and passenger), which actuator(s) needs to be replaced?

This sounds so silly, but do I have to turn The machine off when I’m at 2 ounces, or will it stop on its own?? When I make a shot vs a double shot, how many of the scoops that come with the machine??

how about the passenger side?

I am going to try this tonight, I have two t bone steaks and two iron pans to sear them in and they can go directly in the oven! I honest could smell this video lol lol. I can't wait, looks delicious! Thank you!

Only thing worth watching in this video is the cute chick enjoying the meal...

Other end of that hose .... You don't need to remove clamp. Pops right out.

Thank you! This works great 🙏🏻👌🏻🎉

Made me hungry looks great I like mine medium well how long to cook 👍

I've tried resetting the system and it doesn't work. Air blows from the floor, side vents by the windows and defrost area but not the front vents. Help!!

Dmurph have you ever broke anything? And if so , how did you fix it? I’m just asking… for a friend.😅

You always do meat side down bones up

Fantastic utube

Great looking steaks. We like them medium and those were perfect. Thanks for the video.

You don't judge, but the laugh says you do. What if I told you that's way too much salt?

Thanks dmurph

Don’t talk with your mouth full of food. It’s disgusting.

Thanks man. Steak turned out amazing.

Didn't try it yet but it looks delicious