Видео

@ben_thugs tape mod and poron kit

Keychron Unicorn Keycaps

i have left the stock thin foam in the bottom with the film still behind it.

@@marijkee719 Did you try the difference with and without the stock foam?

I think that it only fits the Q1 Pro. But you can ask Keychron.

Did you buy the Q5 Pro fully assembled or barebones? Keychron has videos on their RUclips channel showing how to assemble the keyboard. As for the accoustic upgrade kit, you need to replace the existing foams with the ones from the kit.

I liked it the most in combination with the tape mod. It adds more thock and it's not as hollow as stock.

I ordered them hand lubed from a keyboard store on Etsy. LoobedSwitches.com might have them too.

Thank you 🙏

I haven't tried but the housing of the switch is black so probably not

Maybe if you use polyfil instead of cotton pads the flex will be better. It is less dense than cotton.

@@Splashy2k Yeah i used polyfill, placed a sound deadening mat beneath the polyfill too. Might try it with just the polyfill.

@@0xBULLgogi Yes, that should help

Thank you!

Thank you! I'm glad it helped.

Thank you. I modded the keyboard before switching out the switches. I did a sound test with the Gateron Pro Red after modding the keyboard, it's in the video.

Thank you! I really like how it turned out too.

Thank you!

Did you lube it yourself or just stayed with the factory lube?

@@alexngo7030 I bought it prelubed. I like lubed switches but I don't have the patience or the time to lube them myself.

Thank you!

Hey, thank you, glad you liked it. I personally like the polyfil and tape mod because they are easy to do and they really made the sound and feel better. I tried pe foam once and it didn't work for me, maybe my pe foam was too thick.

@@Splashy2k Probably, i have heard it shouldn't be any thicker than 1mm preferably 0.5mm but i will definitely give the polyfill mod a shot. I just need to figure out what switches to go for with this set up. Choosing between the milky yellow pro, oil kings and boba u4t. And do you think changing the keycaps made a big difference in feel and sound?

@@GeorgeWKush-lb4fc The keycaps you choose can make a difference in feel and sound.

@@Splashy2k i know that, but do you think it was worth it getting different ones rather than the stock keycaps

@@GeorgeWKush-lb4fc I actually liked the stock keycaps better than those specific keycaps but it depends on the keycaps, obviously. Some I like better than others. I generally like a softer typing experience.

Thank you. The Numpad is KBDFans KBDpad Mark II

@@Splashy2k actually looks great together than with the q0 size wise 👍

I used cotton. I also lubed the Boba U4Ts the Gazzew way and that made them sound deeper.

Thank you :) So do I

Personally I have done this mod on several keyboards and nothing happened but your mileage may vary. Do so at your own risk.

You're very welcome :)

Thank you! :)

Lol li literally every single other comment got a like but yours didn’t. Sadge

Thank you 🙏 Yes, it's pretty big. I really like it.

@@Splashy2k I now also have the Q6 and I have a question, when I press the "Caps Lock" button, the LED turns white, but if I press the "Num Clear" button, it doesn't white, is that the case with you too? shouldn't it also be white as an indicator?

@@Neikon I use GMK keycaps that are not shine through so I haven’t really noticed but I’ll try and see after my cat gets off the keyboard cover 😊 In the meantime maybe you can also try to program it using VIA

@@Splashy2k I've already looked at via, unfortunately I can't find anything, I've now also gotten PBT keycaps, I just want to know whether my board is defective or whether it's normal :D it would be nice if you could take a look. normal RGB lighting works without any problems

@@Neikon I checked and on my keyboard neither the capslock nor the numlock turn white, it's just the normal RGB. Maybe it has something to do with the lighting mode, or not.

I have the steel plate that came with the keyboard

@pillow rabbit Yes, I did

It's a custom cable from Glorious

Thank you! The keyboard doesn't have a light indicator for Caps Lock and Num Lock.

My Q6 (with firmware updated to 1.02) changes the RGB lighting for Caps Lock to white when it's active. I'm sure there's a way to reprogram it however you'd like through VIA. Hope that helps. 👍🏻

@@DanH11 Thanks for the info!!

Thank you! The keyboard doesn't have a light indicator for Caps Lock and Num Lock.

@@Splashy2k Is there a way you can get around it? Any other indicator using light?

@@arafathshiyam It may be possible using VIA/QMK.

@@arafathshiyam I believe you can program it in VIA/QMK to modify your lights when caps lock is on. I'm assuming the same for numlock but not sure

@@im_Spade_ I have not programmed mine yet. But I believe you have a large variety of option with QMK. I just did not get around doing it yet.

I'm a touch typist and I don't type hard but for me at least the flex doesn't bother me and after the mods I made there might be less flex than before but I don't mind it.

I don't think there's any version of Q6 available in White just yet. Some people spray paint their keyboards, I don't feel comfortable doing that. My favorite switch, that's a tough question, lol. I like quite a few switches and I can't decide on any one of them. I mainly like linear and tactile switches, especially linear. I know I like my switches lubed because it makes them feel a lot smoother and softer and I like the sound better that way. Some of the switches that I like are alpacas, banana splits, nk creams, Black Ink V2, Boba U4T.

Q6 Pro comes in white now!

I tried doing the PE Foam mod once and I had trouble fitting the switches and a lot of switches wouldn't work with the PE foam installed. I bought PE foam that was recommended by one of the youtubers who did the mod.

@@Splashy2k it's probably too thick. I had the same issue when I used 2 layers of pe foam that came with my tv. With 2 layers, about 70 percent switches work and it sound super super nice and creamy. I can make it work but will be tedious as most switches were bend as 2 layers of pe foam was pretty thick so if u didn't insert the switches straight on, it might bend. I change to 1 layer of 0.5mm pe foam and it worked on my first try. All switches work without me removing to check the pins. Though 0.5mm is not as creamy sounding as 1mm, it still does have that creamy marbly sound.

@@jamesmadison3108 Thanks, I'll try to find 0.5mm PE foam.

polyfill is wonderful. Stop spreading false information. PE foam has NOTHING to do with what polyfill does. bozo

I like them a lot, they're great.

Probably, for now anyway :)