Видео

Where is part 4

great job man. Thanks a lot.

Thanks so much for spending your time explaining Fusion 360! Ill probably have to watch the video a few times to actually get it but at least I have a source of reference!

The best Fusion 360 vid I watched. Great pacing and details. Thank Boss!

Was really looking for a video like this. I always was sure there was a method to make a cutting project in custom steps. Thanks

Awesome video.

That’s one of the most useful tutorials I’ve seen! , thanks for posting 👌👍

Thanks for that😁

Pero no lo veo la gracia si no lo podes sacar para tomar whisky 🥃

Nice build, this helps inspire me to go finish up my projects thank you !

Super helpful, thanks a lot!!! quick question: how would you go about creating a fusion360 file with short plasma bursts to act as center punch for drilling holes? short enough not to harden the metal...

Quick question we’re can I find the square tubing and the metal tubes you are using I am building a project like that and I need that type of box tubing for my frame set up

what size bottle do you have?

awesome video thank you it really helps for new people trying to learn.

Thank you for sharing. Just started to learn this and it is frustrating. Your video is one of the best I have watched.

Dude, thank you. This information is great! Much appreciated!

Best Fusion 360 video I've watched yet! Thank you!

Aaaaa+++❤

I’ve watched countless videos on Fusion360 ramping up to get started on my plasma table. Your video has given me several useful tips. Thank you!

Thanks man

I’m not the only one that thinks this video was extremely helpful. The amount of questions you answered and possibilities you opened up for me in Fusion definitely earned a sub. Thank you!

Make a video for beginners. Fusion 360 personal use ( not for commercial use ) have the same setting ? Make a video please and really enjoy watching your videos

Thanks, been wondering how to do this

Easier way is using slots and extruding them for straight ones. Splines, arcs, circles then pipe>square, join for the custom ones.

After all the videos I seen your more down to showing how it works you make it easy learned a lot thanks

Thank you this helps a complex program with my simple mind....

Can you please share the rough dimensions of the bead roller stand.

Like your video , thought it sounded like a dog walking in the background because I have two on a wood floor that sound the same. I don’t know whether you knew it but Lang Mark had somebody come up with a piercing only placement I haven’t tried it yet. One thing that would help me out is a larger cursor or I have seen one guy used a red ring around the cursor it’s easier to follow sometimes I can’t see.

Thank you for this video! Great information!

Oh man. This is EXACTLY what I was stumped on. Thanks so much for sharing this.

Doing the straight line setup was exactly what was looking for!!! Thanks so much.

Absolutely excellent !!! Thanks !

Would you be interested in building another one of these?

Love the little small block chevy, do you make and sell kits?

This was exactly what I was stumped on. Thanks so much for explaining this!

Thank you for this!

Where did you source the materials for the 4 link rear and 3 link front suspension?

Bravo, your fabrication skills are top-notch, I just lifted a golf cart and it's a E-Z-Go 875xl, it is a tank that you sit over the front axle so with lifted tires that makes it a son of a bean to steer I was already thinking about a hydraulic boat steering and Googled it and this is the first one that came up. again I'm going to say it Bravo on your fabrication skills, looks like I'm headed down this path also.

Thanks! This was extremely helpful! You did a great job explaining this! Will watch more of your videos!

I have a similar test plae that i use all the time I was using it following along with you when you click the circles always indicate a inside cut on mine it always indicates an outside cut which then I have to switch the arrow to inside is there a way in fusion to switch that not a big problem just annoying. Thanks

Did you ever decide to sell the engine kit

Awesome! thank you so much for all of the info. I was under the impression drawings had to be extruded before creating cut paths. Very helpful indeed!!!!

Are you using an air tank or just pumping into the bags directly?

Thank you very much for this. I was struggling how to make a straight line inside of some stock. I do have one question though . Are you able to extrude something like that on the design tab and have it show the relief cuts? When I extrude a body with straight lines inside of it, the straight lines are not "holes" in the stock. I'd like to be able to see what it will look like before cutting if possible. Thank you!

Thanks .very informational and you explain yourself very well thanks so much

Thank you for this.

I use splines almost every day and export as DXF. Sheetcam has no problem seeing them?

Thanks for sharing! At about the 43:00 mark, instead of guessing, you can use the Calibrate tool for getting the canvas really close to exact. Also, using points that are as far as possible apart, will increase accuracy. For example using the two holes that are 5.25" apart, instead of the holes that are 3" apart. Very powerful once you leverage this. I have taken photos of complicated parts including a measuring tape for calibrating. Makes modeling pretty straight forward to get all the curves and basic geometry. At 54:00 good tip for creating pierce points for post production machine work.

Good to see you back

Great tutorial. Thank you