- Видео 52
- Просмотров 1 185 811
md9897
Добавлен 30 мар 2007
Random activities involving building things, diesel trucks, dirt bikes, outdoors, etc
1999 Ram 2500 Cummins 24V 0F Cold Start
Cold start the morning of 1/17/2024 in North Alabama. It was 0 degrees F with several inches of snow/ice still on the ground from the weather on 1/15/2024. Truck was pulled outside the previous morning while I used its parking space in the garage for working on other projects, so I decided to get a cold start video.
Initially the trucks batteries would not spin it over fast enough, so I brought out the 2016 to give it a boost. Grid heater is deleted. Block heater was not plugged in.
The truck has a 62mm turbo, 125hp DAP injectors, Quadzilla Adrenaline, Airdog 4G, ARP studs, 4” straight pipe to a 6” tip, fully built trans, etc.
Initially the trucks batteries would not spin it over fast enough, so I brought out the 2016 to give it a boost. Grid heater is deleted. Block heater was not plugged in.
The truck has a 62mm turbo, 125hp DAP injectors, Quadzilla Adrenaline, Airdog 4G, ARP studs, 4” straight pipe to a 6” tip, fully built trans, etc.
Просмотров: 1 012
Видео
1999 Ram 2500 Cummins 24V 20F Cold Start
Просмотров 535Год назад
Cold start the morning of 11/29/2023 in North Alabama. It was 20F with a heavy frost. Truck was outside the previous two days while I used its parking space in the garage for working on the other truck, so I decided to get a cold start video. The truck has a 62mm turbo, 125hp DAP injectors, Quadzilla Adrenaline, Airdog 4G, ARP studs, 4” straight pipe to a 6” tip, fully built trans, etc. Grid he...
Planting Vego Raised Garden Beds 2023 - Time Lapse
Просмотров 42Год назад
This video contains some time lapse footage of planting the Vego raised 4' x 8' garden beds. We planted tomato, cucumber and pepper seedlings, as well as directing sowing some squash and zucchini seeds. We also spread some wheat straw to help prevent weeds and retain moisture better for less frequent watering. The 6 mil plastic zip-tied to the t-posts helps protect the seedlings from the strong...
Prepping and Planting Garden 2023 (Time Lapse)
Просмотров 91Год назад
We recently prepped and planted our larger, behind-the-fence garden for the 2023 season. This footage is from some of the GoPro time lapse footage I recorded. The trusty Kubota BX2360 with a 48" rotary tiller was used to till up the ground. Then new for this year, I purchased a disc hiller from our local Rural King to make the row beds easier. After a slight width adjustment, I was happy with t...
DIY 22' x 40' Garage Build Time Lapse
Просмотров 592Год назад
In this video I combined some time lapse footage of framing and sheathing a 22' W x 40' L x 10' high detached garage that I built last year. I chose to do it myself after having multiple contractors give me the run-around or just flat out not respond to inquiries, even with 100% cash in hand to pay the price up front (guess they were too occupied with the "housing boom"). I did the majority of ...
Preparing & Planting Garden 2022
Просмотров 170Год назад
Time lapse videos from planting the garden last year. I used our Kubota BX2360 with a 4 foot rotary tiller and a homemade hilling attachment to create the row beds. Green beans, pink eye purple hull peas, yukon gold potatoes, dixie queen watermelon, and silver queen sweet corn were the varieties planted. Hopefully you enjoy this video walking through the process of a DIY garden to grow vegetables.
Planting Vego Raised Garden Beds 2022
Просмотров 21Год назад
A short time lapse video of planting the seedlings in our Vego 4' x 8' raised garden beds. We used the "square foot method" to lay out the spacing and create a grid where each plant would reside
Vego 4' x 8' Raised Garden Bed Assembly
Просмотров 111Год назад
Time-lapse of putting together a couple 4' x 8' Vego raised garden beds. The dogs enjoyed lounging around while we assembled the beds. Assembly was easy, and after the first year of use the beds still look brand new. I'd recommend them for anyone wanting a quality raised garden bed.
Picking Soybeans October 2022 - Meridianville, AL
Просмотров 276Год назад
Soybeans being harvested fall of 2022 in Meridianville, AL. Video speed increased 4x
Spraying Soybeans July 2022 - Meridianville, AL
Просмотров 56Год назад
Soybeans being sprayed in late July 2022 in Meridianville, AL
1999 Ram 2500 Headlight HID Projector Retrofit
Просмотров 1,2 тыс.2 года назад
In this video, I go step-by-step on how to properly install an HID retrofit on a 1999 Dodge Ram 2500. This would work for any 2nd gen Ram (1994 - 2002). I had a different pair of 9004 bulbs I tried to install, but while doing so some tabs on the headlight lock ring broke off. Frustrated that I couldn't find the exact lock ring to fit these aftermarket Amazon headlights, I just decided to do a p...
Shortening PTO Shaft on Tiller & Kubota BX2360
Просмотров 2,9 тыс.2 года назад
In this video I cover how to shorten a PTO shaft for a tiller I purchased to use on my Kubota BX2360 sub-compact tractor. Usually the PTO shaft is too long for use on these smaller tractors, and length reduction is required for proper fitment and operation. This process is the same regardless if it's a tiller, wood chipper, auger, etc. Apologies for the windy conditions in the first video clip,...
Moving a Deer Feeder & Setting Up a Mineral Lick Site
Просмотров 292 года назад
In this video, it's a continuation of work accomplished the day we used the DR Brush Mower (the previous video). The deer feeder gets moved from a location on an old road deep in the woods, out to the newly cleared powerline that we will turn into a food plot later this summer & fall. I also cover how we set up a nice mineral lick site using a mineral mix we made ourselves, how to make the mix,...
Clearing Land using DR Brush Mower - With TImelapse
Просмотров 2702 года назад
After repairing the DR Field & Brush Mower by installing a new clutch, idler pulley and belt, we take it to the hunting property and put it to work. This is an approximately 0.5 acre area my buddy wants to turn into a food plot this summer and fall, so what better time to cut brush than before the spring green-up. The new parts on the mower made a big difference, and it handled the brush with e...
Rolling Pulls in the 1999 24v Cummins
Просмотров 3 тыс.2 года назад
Just some random footage of rolling pulls in the old 24v Cummins, with a surprise at the end. Traction is lacking at the higher power settings on factory 245/75R16 tires. It’s not fast compared to what many folks are doing with diesels these days, but it’s a fun and reliable old farm truck with only 111k original miles. Mods include: Quadzilla Adrenaline tuning w/tap 62mm turbo 125hp injectors ...
Repairing DR Tow Behind Brush Mower - New Clutch, Idler Pulley & Belt
Просмотров 4,6 тыс.2 года назад
Repairing DR Tow Behind Brush Mower - New Clutch, Idler Pulley & Belt
2014 F150 3.5 Ecoboost P0303 Fix - Coils & Plugs
Просмотров 1,8 тыс.2 года назад
2014 F150 3.5 Ecoboost P0303 Fix - Coils & Plugs
1999 Ram 2500 24V Cummins 16F Cold Start
Просмотров 1,6 тыс.3 года назад
1999 Ram 2500 24V Cummins 16F Cold Start
1999 Ram 2500 24V Cummins Cold Start
Просмотров 4,3 тыс.3 года назад
1999 Ram 2500 24V Cummins Cold Start
1999 24v Cummins First Start after 125hp Injectors & 62mm Turbo
Просмотров 20 тыс.4 года назад
1999 24v Cummins First Start after 125hp Injectors & 62mm Turbo
Honda XR250R FMF Powercore 4 Idle & Rev
Просмотров 30 тыс.4 года назад
Honda XR250R FMF Powercore 4 Idle & Rev
RS-68 Hot Fire Engine Test at Stennis Space Center - December 11, 2019
Просмотров 2115 лет назад
RS-68 Hot Fire Engine Test at Stennis Space Center - December 11, 2019
2014 F150 Ecoboost 3.5" Diamond Eye Stainless Exhaust
Просмотров 6 тыс.8 лет назад
2014 F150 Ecoboost 3.5" Diamond Eye Stainless Exhaust
2014 F150 Transmission Groaning & Buzzing When Shifting - 2
Просмотров 1,2 тыс.9 лет назад
2014 F150 Transmission Groaning & Buzzing When Shifting - 2
2014 F150 Transmission Groaning & Buzzing When Shifting - 1
Просмотров 2,9 тыс.9 лет назад
2014 F150 Transmission Groaning & Buzzing When Shifting - 1
EFI Live via Anarchy Diesel - Hot Street Tune
Просмотров 8 тыс.10 лет назад
EFI Live via Anarchy Diesel - Hot Street Tune
Snow in Grant, AL on February 11, 2014
Просмотров 27110 лет назад
Snow in Grant, AL on February 11, 2014
2006 Cummins 5.9 Injector Kill Test
Просмотров 3,5 тыс.10 лет назад
2006 Cummins 5.9 Injector Kill Test
2006 5.9 Cummins Injector Contribution Test
Просмотров 5 тыс.10 лет назад
2006 5.9 Cummins Injector Contribution Test
I think mine sounds the same, have never adjusted the valves. So too loose. You notice it more when the engine revs up. Will have to do them now. But will wait till spring. I just started noticing it a few days ago.
What brand turbo?
@@John-pork23444 from Smeding Diesel
What injector size is that? I know 125hp but what numbers?
The injectors are 7x0.095
Hey md9897, do you have an email address we can use to contact you regarding this event? I'd love to discuss a license to use them if possible! Cheers, Felix
0:09
Curious do you hear it driving normal or when you hard accelerate get up to about 50 mine is a little sluggish and ticking noise like valves
Sounds terrible. Delete this video
Who did you get your tune from
1badvp44…aka, TJ Frey
Hi Great content ! do you have a link for the replacement clutch used? Cheers
Sure thing, here you go. Says unavailable on Amazon but look up part number online. DR Power also sells replacements: a.co/d/do9OoUW
What monitor is that??
@mateoestrada2617 it is just a cheap Android tablet using the Quadzilla tuner with Bluetooth
where did you get that fuel tank?
Amazon
What’s your guess on the hp and torque on this rig, and how’s it holding up as of now?
It should be in the 450-500hp range. It's holding up great. All parts are performing as they should. Granted if I'm honest, I only drive this truck maybe 1-2k miles a year (bought in 2020 from my grandfather with 108k, only has 113k now). So I really haven't tested the durability/longevity of the parts, but I see no reason I shouldn't be able to get a lot of miles off of it.
@@md9897is that with the tuner all the way up power?
What’s done to your transmission
Triple disc DPC stock stall converter, Alto red eagle frictions & steels (increased OD counts), billet input, TransGo TFOD tuned to about 160 psi, billet servos, billet accumulator, billet lever arm, etc. Basically what most companies are doing in their 650-850hp builds. And I run an external TC lockup switch. No need for an upgraded output shaft...2wd outputs being so much longer in length than 4wd outputs, they take the beating far better.
My third gen Dodge Ram has 4006000 Mi on it it has the same rattle, I think I've got somewhere in the upper valve train I have problems getting my feeler gauge in there to do a proper adjustment so I think I've got some indentions in the upper rocker arm
Can you reply with why you felt clutch needed replacing? was it engaging but not turning blades fast. My mower not cutting grass well and I notice when I engage the clutch There doesn't seem to be as big of load on the engine as there use to be. other than that excellent video very helpful
Hey, good morning! My clutch starting making a pretty awful metallic "screetch" noise and just like you said, wouldn't bring the blades up to speed. Trying to cut any amount of grass, much less brush, and it'd just stop spinning. Double check that your belt hasn't come off your idler pulley too. After my clutch replacement, I guess I didn't get my idler pulley bolt torqued properly, it came loose, allowed the belt to slip, and I'd only hear the clutch solenoid clicking on/off but no change in blade speed. Some Loctite solved the idler pulley being loose.
@@md9897 Thanks so much I finally realized that the Idler Arm was sticking so it wouldn't put pressure on the belt which resulted in spinning but not cutting grass, I ordered a new bushing for the belt arm but in the meantime, I hit it with some WD40. Thanks for the tip on Locktite when I replace the bushing I'll put a new pulley on and put some Locktite on it.
What kind of tranny you running ?
Nice and comprehensive
I’m a visual learner too, so thanks for the clear explanation i haven’t seen on any other videos.
Was this on stock tune? The smeding costs the same as a new holset
Yes stock tuning before adding the Quadzilla with 1badvp44 tunes from TJ
@@md9897 appreciate the response. Needing to throw on a new turbo but still need to drive the truck occasionally until I can upgrade fuel and add tuning.
What temp thermostat is in that thing???
Just a factory Mopar 190 deg F unit
Great video. Ive been looking for retro i fo on a 2nd gen but looks like most people just throw in a LED bulb or pay someone a lot of money yo do a retro. Ill be using morimoto projectors but this was a huge help. Btw, are those 2.5" or 3"?
Thanks! The projectors I used were 2.5"
Im getting ready to do this myself, but want to retain the OEM style lights but am worried that the "texture" of the OEM glass is going to have an effect on light output. any thoughts?
Correct. The OEM diffused lenses will not work and provide a crisp cutoff line. You'll have to swap to a clear aftermarket lens. To retain as OEM as possible, I'd go with chrome housing lights with an amber reflector.
@@md9897 thought so. Thanks!
I think both detents must be in one line .otherwise there would be slight error.
Bless you sir I would have never thought to try something so simple 🙌
Why on earth are you whispering 🤷🏻♂️
Thirteenth 😯
Thanks for putting this video together. The best one RUclips to watch on the subject IMO.
What a beast!
god bless md9897
That thing was massive. 😮
Need help with wiring going to the solenoid and ground from battery and ignition. Color of wire to what post.
Tornado + body horror = multi-vortex.
Армагеддон, а мы мошкара против стихии.
Such a simple fix lol
There is without a doubt some time that this tornado had reached ef5 strength at some point in its life but didn't damage something well enough to be given the rating
The trees in the fore front need some trimming.
😞😞😞😞😞🙈🙈🙈🙈🙈🙈🙈🙈🙏🏼
This is so similar to noise coming from my wheels. The weird thing is it is not continuous. It comes and goes and it doesn’t make any noises in the first 3-5 minutes after I start the car. It is either brakes, bearing, rotors or something as simple as this. I will have it looked next week and I hope it is as simple as this one.
Hi! Can you send the link of your fog lights?
See if this works: www.amazon.com/gp/product/B07WFLK5D6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Talkin pretty soft during the oven part, your wife gonna kick your ass😝😝😝
Is that little wire clip deal on the bottom of the bulb touching the floor of the housing?
If you’re referring to the wire clip on the backside of the bulb that holds it in place, no it doesn’t interfere with the headlight housing
@@md9897 Hey thank you! I built me a set not long after watching your video and a few others.
Still the nastiest tornado I've ever seen
I really like your set up what brand is your turbo thinking on a smedin s362 aswell
Thanks! It’s a Smeding same as you’re looking into buying
Bruttissimo. 🙏🏾
Mamia. 🤦🏻♀️🤦🏻♀️🤦🏻♀️🤦🏻♀️🙈🙈🙈🙈
Terrore e 🤦🏻♀️🤦🏼♀️🤦🏻♀️🤦🏻♀️
Do you by chance have a part number for the tension spring attached to the pulley?
Apologies for the late reply. The DR Power part number is A0001719593 for the 1.0 OD x .115 Wire x 8.0 Long spring. I actually broke the end of my spring last weekend, and looks like DR/Generac don’t have them. So I ordered part number 1942N942 from McMaster Carr. It’s a stainless spring measuring 1.0 OD x .125 wire x 8.0 Long with hook ends
I’ve seen several different videos of that Tuscaloosa tornado and no matter how you look at it, that was one scary beast of a vortex. A real relentless “ Bully “ of a storm. I feel for those who were effected by it.
Awesome instructions sir good job..
Thanks!
I have never personally seen a real live tornado with my eyes, but judging by all the videos I've seen of that it, this "TuscaloosaTornado" looks like the worst,most destructive, most terrifying as well as most deadly tornadoes in recent U S history.