Видео

Thank you for reaching out, I truly can't recall the details as it was over 2 years ago...but I can assure you I did follow the instructions on the install sheet following the details of the diagrams and supplied hardware.

Also wanted to add that I've had no issues with rattling or any undue movement or misfiring of the cover when removed for cleaning and reinstalled.

Hello, thanks for reaching out. The Flags were off Amazon, they are 3-d not decals and since they were black on both sides I put them on the inside of the Car w Dark Foam adhesive tacs and the black backing looks Black from the outside.

2 Pack 3D American Flag Sticker, 4mm Thickness Acrylic Cut-Out USA Car Military Patriotic Emblem, Matte Black Bumper Stickers Decal for Car Truck SUV (One Left and One Right a.co/d/cpLdqNv

Hi thanks for reaching out...this thing keeps the engine cleaner as well... Please look at the video I've added all the part numbers you can take screen shots... the cover is noted at count 2:20 Good luck...recall in the video I mention most of the parts departments and Car sales personnel don't know this thing exists...you'll have to have them actually look it up in their book before they realize it exists...also note the special mounting bolts Take good care ~Kriss

Hello and thank you for reaching out...Ben out of the country away from Wifi for a week. The seller I used I see is no longer on Amazon and Ebay but Here is a Link to a seller that offers different colors of the covers. PRO TIP: as you prel off the 3m adhesive cover its difficult to get these intimately fitting adhesives to slip into place fully before they bind...so applying four drops of a soapy water mix allows them to slip on then adhear properly (Soapy mix is 6oz water with 1/2 teaspoon of dishwasher detergent, then use four drops on adhesive surface) Good luck 👍

Thank you foe your question I'm sorry I had missed this ... no the "paddle Shifters" on this only change the gear ratio in forward

Curious how all ironed out for your project...any issues on removing the Dampening cover ?

@@virgolife None at all. I took that cover off and cleaned the engine meticulously. 41,000 miles on it and the engine sparkles. It's good to keep my baby as clean as I can get it. It's a driver but in classic condition. Thanks again for tht tip.

Thanks for reaching out...this was the set I purchased from Amazon but I see it's not avail...check the setup on it and see if you can match it...the key was the four strips with different length wire and Cig plug

Thanks for reaching out I see the set I purchased is n longer avail on Amazon...see if you can match the setup the key was that it had four strips of LED and two different lengths of wire w Cig plug...Best of luck ~Kriss

@@virgolife thanks

Shhhh it's a secret LOLL

Hi, I found them on Etsy multiple sellers have them there...they were about $15 when I hot them.

Hello and thank you for reaching out ...the translation I got from your message is "Can you tell me which Ford model will use plastic fender liners instead of the standard ones" I haven't had to change my fender liners and was not familiar with available options...but looking on Google I was able to bring up multiple plastic options from $60-100. I looked up "Ford bronco sport fender liner"

@@virgolife спасибо ,но я не нашёл

Thank you for reaching out here's is the Amazon link to the buyer I used but the link Saya not available...but you can all the specs and use another seller that will also come up for you. Best, Kriss Hook (Black) a.co/d/dIp3evX

Hello, and thank you for reaching out... I have Amazon Prime and found all the onlays there... and with the free returns, it's a nice insurance...I've had none of the onlays have any misfit issues even though they have been from different sellers they have all fit very, very precisely 👍 They all have come with the 3-m Red adhesive, which has not debunked thru extreme heat or cold. I see that the product availability and sellers change often, so I haven't seen any one seller provide all the parts I've ordered, especially in a specific "color" selection. If you have Amazon, I feel you will have the best experience. Good luck to you. Thank you again, Kriss

Hello, and thank you for reaching out... I have Amazon Prime and found all the onlays there... and with the free returns, it's a nice insurance...I've had none of the onlays have any misfit issues even though they have been from different sellers they have all fit very, very precisely 👍 They all have come with the 3-m Red adhesive, which has not debunked thru extreme heat or cold. I see that the product availability and sellers change often, so I haven't seen any one seller provide all the parts I've ordered, especially in a specific "color" selection. If you have Amazon, I feel you will have the best experience. Good luck to you. Thank you again, Kriss

I'm laughing becasue I didnt notice any difference...another person had written me and said the same thing, "No difference"... I just enjoyed the instal as it made the compartment look more finished and maybe keep it cleaner over time.

@@virgolife basing this on the escape with the 2l. However I also know that the escape doesn't have a hood liner, and the sport does... I was going to do this modification, but I decided to side-grade to a full size, I miss my manual, and there are certain things about the sport that annoy me, some pertain to my pericular car, and some design elements (like missing engine cover, skid plates, the fact that the interior dosent match (black on the bottom Grey on top), behind the hood funnels leaves into a bucket in the fenders, stupid location of the rear wiper switch......... There's more but.... All in all I still love it and I will miss it when it's gone.

It took a lot of research to find mine for the Ford Bronco Sport... -I first looked online to see what different Auto Supply stores were offering -took down those part numbers and screen shots of the images -went to the dealer parts department and asked them about the part numbers -some didn't know the part existed even though it was in the supply book -the final step was making sure you pay attention to the parts book Asterics as they indicate specific additional mounting brackets or screws that are necessary That was it, got all the parts and followed the instructions on the packaging -the install was easy and only needed simple tools Best to you, hope you find what you need to get your project done. Kriss

Thank you so much. The dealer here was charging $13...That's the reason I experimented with an alternative plan. Appreciate your comment.

Thank you for reaching out...lots of time spent to research and find the product...and extra cost, but by that time I had to get it and install it, I felt it looked cleaner too LOLLL

@@virgolife looks 100% cleaner.

Hi Brian, it was from Amazon still at ~$22 Good luck Envelope Style Elastic Trunk Mesh Cargo Net for Ford Bronco Sport 2021-2023 - Premium Trunk Organizers and Storage - Luggage Net for SUV - Best Car Organizer for Ford Bronco Sport a.co/d/4yhWGoo

Very kind of you to mention, excited you haf a great result. Take good care. Kriss

Hi thank you for asking, If you are talking about the pad i placed on the Trunck shelf...it's simply a kitchen drawer liner that they sell in different widths at Wallmart or Target. They come in different colors too. Take good care, Kriss

Thank you so much...mustangs are so much fun, I sold my Shelby at 97k and bought the Bronco Sport. Take good care.

Thank you for the shout-out, Honestly, the bolts just support the dense foam, so as long as you find a bolt with the right pitch and Hieght, it will and has for me kept it in place, with ease of removal and replacement.

It's a darn shame...it's truly been a Lego Project "putting a new car together" the way it should have been delivered

Fully Loaded Sport Badlands is like $47.5. Not sure where you are getting your numbers.

@@ShawnBox the sport is the escape with a square box on it

@@ubeuonly If you think that I will pink slip your escape vs my badlands off road.

@@ShawnBox who cares. Theae are cars for your wife. Same platform. Sport and escape. Body and dash are different. All mechanicals are the same. Often recalled and unreliable says every source

Lower dash Insulator: will definitely look this up, thank you for the shout out, appreciate your note. Kriss

After having mine on for over 9mo I would tend o agree...I don't notice any significant change in engine noise.

@@virgolife Exactly. All that thing does is trap heat and make the head and coil packs hotter. You want to have as much air flow to the engine as possible and that thing not only impedes the airflow to the parts it covers, it TRAPS the heat and makes the engine HOTTER.

I just installed mine - being that it is foam you could be right - should have just been a thin piece of plastic to dress up the engine bay and not of foam that will trap heat - perhaps the original intent of the foam was to somewhat mitigate the fact there are no engine pads on these various models from Escape Bronco Sport Maverick etc.

Great info glad you were able to locate one. Best, Kriss

@@virgolife Thanks - I am a little dubious of the part being made from foam instead of plastic and issues it could have from rodents - not sure why it was not made from plastic

I installed it this week and a big thanks for your video for making it as simple as 1 2 3 - does dress up the engine bay -lets hope the rodents don't find it

The term I heard for this is "decontenting". I've got a couple of first-year cars from another manufacturer. I really like the car, but after the first year they started removing features, chipping away at them one-by-one. I believe they removed the modesty cover (engine cover) after a couple of years. The one that got me was they removed the LEDs from door lock switches in later models. Sheese! Junk yards can be a good source of decontented parts. Old enough here to remember the original Broncos, but I had a Scout.

Thank you for your question ... I am not a dealer so I can't answer your question in detail for part numbers and such. It is best to go to a dealer parts department, as they have a catalog of all the part numbers for this vehicle. Thank you, Kriss

@@virgolife ¡¡¡GRACIAS!!!

Thank you for reaching out ...I looked back on Amazon and the seller I got them from no longer is selling them...here are the details of my order...hope you can find another seller. You take care, Kriss Aramox steering wheel paddle shifters, pair of aluminum alloy paddle shifters, for the Ford Bronco Sport. $29

Appreciate the shout out

You mad bro?

@@mikefranklin70 why? He’s telling the truth. The price of badlands bronco sport with a few options can be the same as a v6 full size bronco. And you cannot get wireless CarPlay/android auto

You do realize that is a bronco sport badlands right?

@@phantomdiesel8032 yeah it’s a rebadged escape, sorry you are too slow to realize what my original comment meant.

There are multiple suppliers on Amazon that sell the "Custom made foe BS" protectors as well. The prices im seeing are under $30..with free returns, it might be worth trying one out. Thank you for reaching out, ~ Kriss

Thank you for your reponse...it is a briliant piece of tech...I found it in the Wallmart Auto section for Moilehome Accessories. They have a nice section of unique products made for Mobile home living. The pack had two of these and was under $10: they take AAA battery. It takes it bit to line up the magnet activator by opening and closing the glove box several times sneaking a peak to see if the light actually turns off when the glove box is almost closed. I fist used double stick tape to do this and once I found the final location for mounting, I used Silicone glue to mount the magnet and the Light. Good luck.

Great Question...Yes there is at least ~7" of clearance left beneath the organizer. Thank you for mentioning that important info.

@@virgolife I'm here to help...lol

Thx Josh

Thank you for reaching out... Here is a Short vid I made on the Pad and the price I paid and the company to order it from. Hope it works out for you. ruclips.net/video/udtsnuDqjhk/видео.html

Right !!! It seems the "Supply Chain" issues kept them from getting them installed on the 2022s... and they sent them out the door

@@virgolife Yes and Ford deemed them No Longer Necessary so the part went NLA

Thank you for reaching out...I've had them on since July 2022 and they have held up very well thru all the rain, mud and rough roads we have in Virginia. I don't see any wear on them. But one caution, since these are stiff rubberized plastic other users had commented that if you go off roading and a large rock catches the guard it may fracture while bending, while all rubber ones that are more like a flap will flex and give way. I'll be making some shorts in the next week and will include the flaps in the short vids.

@@virgolife Glad to hear you're still enjoying them. Yes, the stiffness of them is my only concern. Although I don't do much off roading, I still worry of any potential limitations they may cause. The rear bumper on my Badlands gets absolutely covered in grime though. Really wish there were more options that don't require drilling! Would love to see more shots of them soon! Thanks again.

Thank you for reaching out...it is very dense and flexible, it has some heavy weight to it, very sturdy and durable. I've had it installed since June 2022 and it's holding up as if it's new.

@@virgolife hope mice won't be attracted to it - thought it was going to be plastic

Great suggestion 👌, thank you.

Great Idea

Thank you for your comment, it's crazy that the parts department does not have it listed in the Ford Bronco book and their experienced techs didn't know much more either...the individual parts had to be looked up on their computer system. Thanks again.

Thank you for your comments...the protection Decal is a Ford OEM part, I bought two others off Amazon but the material was sub par. The Ford OEM part had texturing and has some decent material toughness to it. It's been on since July 2022 and it's holding up without any edge lifting or deteriorating. Thank you again.

Thank you for your question... I bought them off Amazon Aramox Steering Wheel Shift... www.amazon.com/dp/B08J3VLC6G?ref=ppx_pop_mob_ap_share

Onde posso comprar..

Thank you for reaching out ..The pedals have a rubberized lip on them that flexes then once over the metal extension arm of the pedal rebound back into a position that locks them in place. You have to remove the original rubber pedals off the extension arm of the pedal on the car (they pop off easily when rocked back and forth as they use the same rubberized lip system to hold them in place). Hope it works out for you. Thanks again

My 2021 came wioth the cover also.

The explanation I was given was that "Due to Supply chain issues" many of the 2022 did not get them installed, yet they were given to the customers without them not letting them know they were missing some of these parts (this was from one of the reps at the parts department)

Strongly Agreed ...

I did need to change the bolts that came with it to longer ones as shown so it would lock the safe in place The short coming is really the easy lock to pick ... so many ways to Jimmy those numeric rollers... but if the con cept is to cause a delay in a Robert and allow the smash and grab without fumbling over a safe then in my eyes and experience it's worth the deterance I keep extra mags and ammo and occasionally if a busyness doesn't allow ccw then I'll lay her to bed for a short time. Although I try Not to patronize businesses that don't support us

@@virgolife yeah, that sounds all good from where I’m sitting… I’m getting a heritage Limited in a couple weeks. Peak blue.

It does appear to be an easy trim for a solid fit. I do like this idea of having this little item.

I appreciate that!

I got mine in Amazon for $50 Lookup... BESTAOO Front Hood Lift Supports Shocks for Ford Bronco Sport Accessories, Struts Gas Springs Shocks Compatible with Ford Bronco Sport 2021 2022, Pack of 2

@@virgolife thank you, will check on it

Honestly not that I've seen or experienced they are very well balanced in their position and I don't see or feel any tension towards warping when trying to close the hood ,great question