Видео

Have a 1997 of this

363 Ebert Ville

I’d like to get a P2000 LEM for carry during cooler weather but (someday) a USP just to have for fun

didnt know what to do with that plunger. thank you for making this video!

dude does all this work but still uses the shepherds paperclip rather than a proper retaining plate!?

The ancestral weapon to the PTR 32 is the STG 45 not the MP/STG 44.

I feel like those plastics could easily crack

You need cmmg on your list

Ruger is basic bro.

😂 you got BCM on the same tier as sig and aero. C'mon dude.

Love my FN 510💪

Will this fit on a polish hell pup ??

At 16:04, suggest to use a vice. Any small one can be used, even 3"jaw hand vice than to risk hurting ur fingers. Didn't like the sparkies. Hope ur wearing a goggle. Mr. Dremel can kick back out of ur hand. For mine, I didn't remove the hammer out. Just did this in situ. I just used #400 sand paper, rolled into a short pipe, about the size of a cigarette butt, flatten it, then pushed it bk n forth to remove the acute hump. Then smoothed it w a jeweler's file. Blow out or suck out the debris w a powerful knife blade on a vacuum machine. Hope this helps the viewers here as well to whom won't like to disassemble much to get this task done. Yes, i agree w the GNerd. Don't over remove the hump/crown.

Where can i get those beautiful grips!!???

You’re saying lightly Polish then you high speed grind ? Sparks equal grinding.

I absolutely love the rami

I prefer the XPS models on a unity riser. They are the most compact and sit perfectly around 1.93” on a unity. However the AA batteries are really nice and easy to acquire in a time of need.

I don’t own a compact USP but I love my p2k. It’s the same internals as the p30 but extremely comfortable and points naturally, not to mention you can use vp9 OR sights on it, so you can get better sight options than the usp. I’m a whore for good night sights with a bright front

Cz .. Czech company .

Good god, this is not even close to how you should refinish an HK stock set. Marginal at best for a weekend warrior but is still looks horrible!!!

I had an AK that had a bad drawback hangup. After some time I notice my wood upper hand hold tube interior, where the bolt carrier piston shaft sides in and out of, had surface drag marks. It was the same pattern as the baffle on my Bolt Carrier Piston shaft...This baffle is on military Bolt Carrier Piston shafts and it's near the end of the shaft behind the piston head itself...Most, if not all civilian AK's do not have this baffle..." it's a star/flower shape" device mounted on the shaft behind the piston head itself...Once the piston shaft was removed and replaced with a normal one it was far better to cycle. No hang ups...The bad side is it got a lot dirty faster...I assume its purpose is to help guide the piston shaft down center hand guard as it travels front to back...But mine seems to work fine without it...Again, many of you dont have this issue...but some one does...

I am about to purchase Night Fision sights, and this video was very helpful. You mentioned a video about sight color, but I couldn't find it. Did you make one?

I cant rack my vector and I havent even shoot it yet

Good video. I’m guessing you’re saying you felt flex in stock trigger during hard second strike double action pull? There’s no way it flexed pulling the light lem. No weight until the wall and then 4.5-5.5 lb pull. The trigger is not that flimsy

video ended when you said springfield was better than a rock. Instantly a trash list

Three years later , PSA just had these bolt catches on sale for $14 each. Just got an Obsidian Arms punch kit also.

Fifty million + AK users all over the world are doing a run on polishing equipment as we speak.

Soviet? Ok Specznaz used it just like Delta Force. It's not soviet it is Czech.

Where did you get that pinky extension?

I decided to try this for myself and im pretty happy with the outcome. Great video. Very educational 👍

Putting the sling swivels on the opposide sodes on folding stocks is so aggravating...

Need a little help here...I have tried both the guide spring and installed the rubber bumper...after 30 rounds I tried to remove the dust cover to see the internals, but no matter how much I press the rear button to try to removed the dust cover plate it would not move AT ALL! I had to do a tap with a hammer to loosen it up to push the guide spring assembly forward...Is this normal for this kind of setup...

I need help.. The pin lines up with one hole but will not on the other.

My p30l sights were an absolute pain in the ass to remove and install. I've done several pistols with both sight pusher tools and punches, and for some reason this rear sight was the toughest.

USP❤

I’m going to white out mine. Having trouble finding a few of the pieces though.

I recently purchased an AMT hardballer, I was surprised at all the negative reviews. Having been a police supply dealer in the 80's and 90's I was more than familiar with the brand and the handguns of the time. I kept reading references to how the firearm was designed to only fire hardball/FMJ. Sorry, so was every 1911 from Colt, etc. The hollow point ammunition was causing malfunctions in all 1911's, I know I sold many. The cure was what was called a fluff and buff. You polished the feed ramps and throat of the barrel. I would feed empty cases through the guns to check the functionality. This was also necessary in many," Wondernines," of the period. Which also had trouble feeding certain hollow point loads. I purchase the AMT for $350, Took it home, did the fluff and buff, installed a 16# chrome silicon recoil spring, completely cleaned the handgun and hit the range. Fed 3 different Defensive loads/hollow points, through the AMT, including 185, 200 and 230 grain, with no issues. Accuracy was excellent. I point shoot at close range, inside 7 yards and was shooting 4 or 5 rounds, loading 5 at a time in mags, in a 2"- 3"group without sights, showing the ergonomics and point ability of the 1911 are spot on. I noted the machine marks in the feed ramp and barrel throat before polishing them to a mirror shine but saw no issues with the slide or frame rails. The pistol had been fired enough that the rails were very smooth and no machining showing. The slide and frame fit had no rattles and the trigger pull was short and light, with no creep or grit, didn't gauge it but my finger gauge said approx. 5 pounds with a barely perceptible take up. The hammer seemed quite heavy to pull back, the 1911 shoots so well I don't know if I want to mess with the spring, I may though as arthritis in my right thumb is a factor. So far, the pistol seems to be a great buy and fully capable. The rubber wrap around grips are good and the fixed sights are dead on. I would love to put night sights on the gun, but the front sight is swaged in so I would have to drill it out and see if anyone sells an old school post night sight I could install. Otherwise, it's probably cheaper to buy a dovetailed slide from Brownells, etc. than to have this machined, I'll have to check. All in All, love the gun, first stainless 1911 made, a small part of 1911 history.

Doesn't this "hang up" get better over time so why dremel any thing?

If you could put the backstrap and decocker from the p30 with the grip front from the p2000 on a usp it'd be perfect

Appreciate your efforts but your video work is not so good: poor, moving lighting, blocked views via your hand(s) and your speech is much too fast. Goodluck!

BUTCHER !!!!! 😂

How's it shot?

Very nice work, and a great tutorial for folks like myself who want to pursue the same upgrade. Thank you, for posting the video.

I like mine but I definitely had to do a lot of handfitting to get it right. Main issues were that the BCG rubbed on the inside, the safety lever couldn't go all the way up, and the tightening mechanism wasn't able to fully cinch the dust cover against the rear trunnion. But hey, we AK guys don't mind a bit of hand-fitting, right?

Terrible!

AK trigger works on self polish... If you remove too much material, the trigger ll not reset, a face some problems with the firing pin, and maybe safety too.

I build my own AKs and I had this crazy idea for a build so I mirror polished the rails before spot welding them in for a smooth glide. Will be modifying and polishing the hammer to take it over the top, thanks for video! My favorite go to is 'The One' with the polished rails/feed ramp ... Damn, can't wait for my next day off to work on hammer.

A lot of ppl hate it? Who? I haven’t seen anyone who hates it.

Try not to laugh after things you say kamala

Does the Kadet Adapter fit the CZ75B?