Видео

Thank you! I still got a few other race cars not shown but these are what I’m currently working on

I haven’t done one of these. But when I was taking it apart by the looks of it. You slide the tray back and you should see/access the tab and there’ll be a pin that holds it, push that pin out if that tab and install new tab. Slide the pin back in. (I’ve done armrest. Should be the same it similar)

Watch my how to video (not the short). It’ll may be more helpful

Can I just connect direct line? And just remove the metal pipe on the valve cover? Looking to keep stock as much as possible but if that’s the only way then maybe I’ll have to do that? Thanks for the response!

@@prototypethisjr I'm honestly not sure, when I bought my K24 for my swap it already came deleted with the coolant housing haha

Yes! I just switch those two connectors around and it fixed the problem! Thank you for the advice! I was scare that it was the transmission itself.

K24a4

I tired. Didn’t budge. Too much vibration. Needed a harmonic socket

I used a harmonic socket

I was using a 19mm harbor fright socket. But trust me you need that 19mm harmonic socket to take out these Honda crank bolt

Being a Honda tech had my fair share of luck unzipping right off but your dewalt is gonna run through all its batteries and still not get this one he had off

@@StalinsPurge Not true with all due respect. Im 60 years old and have done a few of these in my career. Never used those sockets to do it. Never had to change the battery in the middle of it either. 5ah. I bought the dewalt years ago because i watched my other techs doing it and I still love it. Might be stronger ones now but I havnt had to check any out because its a awesome gun. My sons a Milwaukee guy and he bragged about his Milwaukee but has asked to borrow mine a few times. Once you buy a few tools you kinda get stuck with that line. Happy knuckle busting and be safe.

@@rpfl5586 swear y’all boomers take everything literal. Christ on a bike shut up

Have to use it to believe it

K90493 from oreilys (02-04 rsx type s) The 05-06 is different from the 02-04 just a fyi

I can ensure you that they’re not on the body panel. Their on the punch weld.

Sounds like you need a better mechanic buddy

Try going to the doctor for a 30min-1hr appoint/check up and see that bill.

Yeah I feel ya. I hate that feeling too be wet all day and getting sick after as well

Still got the wet snow from underneath the car those are the worst. Slug of snow, ice, water, and salt falling on you

That suck. Luckily we don’t get any truck just suv and smaller cars

I used to do roofing in Florida. And I dont complain about working in the hot Sun all day than working under a car during the rain or snow.

Did it to yourself buddy. Still working for a fella or you finally got out of debt and made it big?

02 rsx type s front lower ball joint part # k90493 from oreillys side note - the 02-04 are different from 05-06

@@prototypethisjr thanks man I appreciate it. I got an 02. Bought a set and didn't fit. Now I can go and give them that part # you sent me.

I throw all my sockets and tools in my cart so I don’t lost them. Worst place windshield Crowell lmfao I lost a few putting them there

That’s what I want to do also but it’s almost $10 for a 10mm socket nowadays depending on that size( 1/4 3/8 1/2)

I got brand name and non brand name. But mainly used the non expensive so if I lost its okay. If it’s a snap on, Mac or Matco then shit it’s like $30 for a replacement

10mm 12mm and 14mm for me lol

Bro shut up hater

Gottom

My first just dumb how they put that 1 bolt under the intake manifold and without a swivel socket/adapter you can’t get to it.

Mice nest customers state “no wonder why I seen a mice crawl out under the vehicle the other day. But didn’t think of anything”

😂😂😂

I tried but it would let it. But it’s a mice nest

Mice nest

The tricky bolt for me was the rear top under the intake manifold. Socket and ratchet don’t fit because it hits the intake so I needed a swivel adapter which came in clutch. I want a set of Torx ratcheting wrench also! Exactly what I wish I had but had to use what I have or could find

Mouse nest

Mice nest

Peppermint oil they hate it

Good to know, thanks!

Mice nest

Mice nest

V bistro in Minnesota 7429 E River Rd, Fridley, MN 55432