Видео

@@barbferniuk5039 Only if you have a lot of work to do. Otherwise, no. The soldering iron is a little slower but gets the job done the same.

Thanks❤️

If you already have a soldering iron at home, sure. But if you want to buy, just buy the appropriate tool for whatever job you have to do.

Assuming that the tool is not damaged or burnt, it must be held almost in place during pyro-engraving, depending on the humidity and hardness of the wood.

inca functioneaza perfect, nu s-a rupt absolut nimic, bratele chiar si gaurite sunt foarte solide. Cat despre accident...ai impresia ca o sa sara bratele pe tine? Imposibil, vorbesti in necunostinta de cauza, nu te supara. Multumesc pentru vizionare!

Спасибо! Я не хотел царапать кору дерева, я хотел ее разгладить. Эта нейлоновая проволочная щетка хороша.

Спасибо!

Mulțumesc mult!🙏

Thanks for the reply anyway :). I succeed making it in a way that it is functioning without vibrations, thus does not require bolting it down to the workbench. I consider this a great advantage and upgrade. I can move it around wherever I need it with ease. Most important is that I can make accurate cuts in absence of massive vibrations.(it is not normal for scroll saws to vibrate, maybe only the cheap ones like this one) Cheers and thanks for the reply!

Purtroppo sì, perdi la garanzia. Ma è una macchina economica, è probabile che si romperà comunque dopo la garanzia se funziona in modo inadeguato. Saluti e grazie per la risposta!

¿Qué información necesitas traducir? Intentaré traducirte si escribes aquí lo que necesitas saber. Saludos y gracias por la respuesta!

Cheers and thank you!

We are in Portugal

Cheers and thank you!

Multumesc mult!👍

Thank you very much, I'm glad you like it!

Multumesc mult, apreciez!👍

Thank you, I'm glad you like it!👍

There really aren't many things to worry about, at most it will bite you a little but in no way will it hurt you seriously. You will get used to it quickly. I'm glad you like it!

Thanks for the comment! It's Actually not that hard to disassemble it, all it takes is a little bit of courage, the arms seems to be holding nice so far, if you look closely I drilled the holes only in between the triangles and that didn't affect the rigidity of the arms.🍻

@@ade-woodcrafts Thank you for your response ! Perhaps you can help me with this problem : I have a Proxxon DSH (V1), and for some strange reason, I cannot get a (pinned) blade into the mount anymore. I have loosened the tensioning mechanism completely, and pushed the upper arm downwards, but I still cannot get it down far enough to get the upper pin into the mount. It would be necessary to get it down another 3-4mm, but there is no further adjustment possible…🤷🏼‍♂️ Do you have any idea what the cause could be ???

@@zeejimi4044 Is there any possibility that the blades you are using are too short?

@@ade-woodcrafts Maybe you’re right : I’ve discovered that there are blades that are 130mm long, and some are only 127mm long, so I’ll check that ! I hope that Proxxon haven’t changed from 130mm to 127mm, as that would be a real headache for me..

Well, just to make sure I didn't do something wrong to her!😂

Cheers and thank you for watching!

It really does a much better job than the wood shavings.

I am really glad I could be helpful and happy that you liked the video! Thank you!

I totally agree with you, the things that we are capable of creating with the help of the lathe makes it totally worth it!

Salut! Multumesc!🍻

Multumesc!🍻👍

Thank you very much! I-m really glad you mentioned you like the burning because in my mind I had some doubts about how it all goes together.🤗

@@ade-woodcrafts very nice chainsaw work also! I can never get cuts that straight!

Thank you very much! The truth is, I don't know how I managed to cut so straight either.😂

Those "features" almost ate my entire woodpile😂 Thanks for watching!👍

Multumesc mult!👍

Thanks for watching! Yes, its size has proved to be very useful over time. What makes me most happy is that I can turn legs for big tables on it.👍

Hey, I'm glad this video is useful! I have had this lathe for some time, unfortunately I have not had the chance to work on others but I can tell you a few things about it. The best thing about this lathe is the variable speed which makes it very versatile, the next thing is the ease with which it operates, you can change the speeds on the go, another interesting and useful thing is that you can rotate the motor assembly at different angles up to 180 degrees.

The only downside I've found so far is that it doesn't have the rotation reversal for finer sanding.

Multumesc!👍