Видео

I have a similar situation,2 ceiling lights,2 switches but one ceiling light has 4 wires. Stupid me hadnt seen the 4rth wire and i dont know what to do with it. Im changing the light fittings in a sitting room,the ones im taking off has a big metal box capable of taking everything inside it,now whoever did the installation used like a ceiling rose screwed to ceiling on top of the flat bar and that was ok. The fittings i have to put in are half the size of the one coming off so i have to identifie all wires and connet them properly and push them up the ceiling.only what do i do with the 4th wire 😰

We’re do I get those tabs ?

Great video, very helpful! Thank you!

One of your live wires in the 3 way connector looks to have burning?. The one near your switched live with the 90° bend. Can be seen when you pushed the 3 way out of the way.

Thanks so much this helped alot

Very bad

Really clear and very helpful. Thank you.

You are an angel sent by heaven to help electricity noobs like me. I have the exact same setup as you, only my neutrals are black, even my light fitting connector block looks identical and I ordered the same clippy orange grey blocks from amazon. But whatever I tried my fuse box tripped. I will have been is despair the last two days, and the electrician is busy at the moment. I will try again using your video as a guide. Hopefully I will be victorious over the ceiling spaghetti monster 👹 🍝

Just about to change a similar light and although ive done it before, just checked on here for a refresher. Great job!

Thank you so much for this. Understand about the spacers now and it confirmed that I had found the correct ones!

felt the frustration, long video short the bolts are not long enough...

can you give me another amazon link for the bolts because that one is no longer valid, or what they are called so I can look for them

Great explanation 🎉

THANK YOU SO MUCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! you a lifesaver

Brilliant video. Ive watched at least 6,000,000 videos on you tube of big burly guys running through this and still didnt understand what the hell they were doing...and this is the one that explains everything clear and concise.

Massive thank you for uploading this video. I have been trawling the internet for the past hour trying to understand how I'm meant to fit so many wires into my new light fitting and couldn't understand what I needed. This video clearly explained what I was missing and I have now ordered all the parts you suggested. Your video was clearly explained and super helpful!

🎉 Beautiful leason. Thank you so much.

Thank you very much for this awesome video!!! Much appreciated 👍

Best explained way of changing a pendant light to a light fitting. Fair play to you I think you've helped a lot of people turn what seems to be a nightmare of a job to a simple way of showing people the correct way. Good on you lovley. 👏 👏👍👍

Just going through the comments and great that 99% approve!!! But please be aware you are putting your life at risk!! Didn't confirm cables dead before touching them!! It's not just about flicking a labled switch and cracking on... don't learn the hard way. Get an electrician 🤷🏻

Love the video how much could an electrician charge for this job ?

Thank you so much, this also solved the issue with my landing light.😊

Thank you for making this I was going crazy as kept on blowing the fuse 😂 you have really helped me out and the lights are now working 👍🏻

omg thank you so much - i just didn't know what those plastic things were for - i was confused xxx

Well done you. Great video, expertly explained. Made very simple. Thank you. Just need to find those connectors now 😂 thank you

This was so helpful! Thanks a million!

You've inspired me (God help us😂).

Superb video!

This video helped me figure out my problem - the M8 screws included on the VESA mount were too short. I had to go to the hardware store to buy the right ones. Thank you!

Thanks, seeing them separated in those connectors and then being wired into a new light made this make sense to me after watching 5 other videos lol.

Thank you , thank you, so much for sharing this information with us. I was completely at a loss, I’d forgotten to photo the original wiring and was in a quandary as how I was going to fix this issue. Your video is so easy to follow, I did stop it and watched it section by section, completing each section before going to the next. BIG thumbs up to you.👏👏👏👏

4yrs old and still helped me in 2024

Excellent thank you

You are awesome. The most best explained video of doing this on RUclips. Thank you so much. Also you have such a beautiful voice.

You have been so much help! Thanks, you. I've watched so many different videos for this task, but this is the only one that truly helped.

💯

Could you have not used a grey 2 core and earth instead of a flex cable?

Brilliant, brings new knowledge to the world of light fitting. Well done. And its still very useful 👍

👏👏👏 amazing

Thanks 🎉 was able to fit my new light

Thank you so much. The multi wires in the pendant freaked me out but you made it super simple

You are a life saver! Thank you so much for this tutorial!

I’ve watched 3 videos on doing this and I was about to throw in the towel and call an electrician. After seeing your video I’ve fitted 3 ceiling lights, you’ve explained it perfectly, best video on RUclips!

U tube knows everything. 😂

Excellent. I was struggling to back my understanding, but your video clarified it all. Thanks

Thank you for a great explanation ❤

Great, thank you, I didn't remember about the adapters, luckily I store everything so I found them quicky. Thanks for the video it was really helpful

Brilliant video. Everything explained thoroughly. Thank you.

First month of 2024 and still quite relevant. Thanks for covering all the issues I faced while setting up. I donno. If I should get mad about the fact that Samsung user guide couldn't be easier to comprehend or that it doesn't include the proper m8 bolts in the starter pack. Anyways, thanks a lot for the video.

Great video, really clear. Please do more 👍